App Icon

Clock32

Description

FAQ:</p><p>---</p><p>Q: How To customize colors and other options of the Watch Face?</p><p>A: Open Garmin Connect mobile app --- Go to Garmin Devices --- Choose your watch device --- Select Activities & App Management --- Select Watch Faces --- Choose Clock32 and select "Settings" option</p><p>---</p><p>Q: How to enable seconds to be always shown?</p><p>A: Only newer models of Garmin devices support this feature.</p>

What’s New

1.2.0</p><p>- Added support for following devices:</p><p>Forerunner 245</p><p>Forerunner 245 Music</p><p>Forerunner 945</p><p>Vivoactive 3 Music LTE</p><p>D2 Charlie</p><p>D2 Delta</p><p>D2 Delta PX</p><p>D2 Delta S</p><p></p><p>1.1.9</p><p>- Reverted seconds always shown feature due to bugs :( Investigating. Stay tuned.</p><p></p><p>1.1.8</p><p>- Seconds always shown on devices with partial update feature</p>

Additional Information

  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • ForeAthlete® 230J ForeAthlete® 230J
  • ForeAthlete® 235J ForeAthlete® 235J
  • ForeAthlete® 630J ForeAthlete® 630J
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • ForeAthlete® 920XTJ ForeAthlete® 920XTJ
  • Forerunner® 230 Forerunner® 230
  • Forerunner® 235 Forerunner® 235
  • Forerunner® 245 Forerunner® 245
  • Forerunner® 245 Music Forerunner® 245 Music
  • Forerunner® 630 Forerunner® 630
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 920XT Forerunner® 920XT
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 3 fēnix® 3, quatix® 3, tactix® Bravo
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
  • vívoactive® vívoactive®
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Mercedes-Benz® Collection vívoactive® 3 Mercedes-Benz® Collection
  • vívoactive® 3 Music vívoactive® 3 Music
  • vívoactive® HR vívoactive® HR
Average Rating: (122 Ratings)

Fin
February 4, 2020 | Version 1.2.0

Absolutely great! I can't see the seconds though.

D
January 27, 2020 | Version 1.2.0

Perhaps the best watch face for Fenix 5x+. And I have tried a ton of them. Very well done. Dear developer, would you consider putting in a feature? I would like to have a HOURS:MINUTES counter calculating the amount of time since the "last activity". I want to have something that shows me how long it's been since I worked out, right on the face. Something you could consider doing? Thank you.

Carlos Arias
January 27, 2020 | Version 1.2.0

My favourite watch face, however, as others have said, HR lags by a minute or two, I'm on the FR935. This does not happen with other watch faces.

Kenneth Mudrak
December 18, 2019 | Version 1.2.0

Downloaded watch face looks nothing like the demo and examples.

Developer Reply
December 18, 2019, Vlood

Hello, Kenneth Mudak. Maybe you downloaded different watch face?

BrianCWH
December 16, 2019 | Version 1.2.0

This watch face is very good. I like it very much. Would you let me know when the icon⛔️ will show up?

Dennis Gome
December 12, 2019 | Version 1.2.0

Great variety of data and not too busy on the screen. Gives all the key data i like.

Roberto Gallego
December 4, 2019 | Version 1.2.0

I love this face for my fenix 5S but i change to fenix 6 and it's not compatible....i need this face in fenix 6 please!! Regards and thanks!

MTBiker
November 23, 2019 | Version 1.2.0

Ok! (FR 735XT)

Cristian Rosa
November 14, 2019 | Version 1.2.0

Very nice one! Please add an option to change Goal progress back color.

Saad Mufti
November 13, 2019 | Version 1.2.0

Really like the look. And battery consumption is very low since I installed this. On the other hand, the heart rate display is useless as I'm not sure what value it shows, doesn't seem to update in real time and always differs from what I see in the dedicated heart rate widget by large amounts. The second display comes and goes with seemingly no pattern I can see, it is sometimes there and sometimes missing.

Developer Reply
November 14, 2019, Vlood

Hello. Thank you for review. Would be great if you read description before giving three stars. Heart rate data is exactly what I got from Garmin API. They seem to give some interval HR which is updated in half a minute or so. Don't think it is possible to get real time data. Seconds are shown whenever you raise your hand. Always showing seconds is tricky and i will deliver it when i have time to fix errors and properly develop the feature.

Aaron Rindy
November 13, 2019 | Version 1.2.0

Works well nice simple, clean. Would like to see seconds always on!!!

Stefan
November 1, 2019 | Version 1.2.0

Like this one. Very good structure. Five stars when seconds always on. Read that you are working on that. Looking forward to it.

FLesleyP
October 31, 2019 | Version 1.2.0

I really like this. But.. Why has it started to be replaced by an analog? Only reappears after I've turned off watch and/or fiddled with both watch and app on phone. Infuriating.

Krzysztof
October 12, 2019 | Version 1.2.0

I realy like it. It is clean and well made. One problem apears on FR645. There is a lag on HR. HR is refreshing very slowly and its always diffrence with HR widget from Garmin.

Developer Reply
October 31, 2019, Vlood

It is not a problem of my Application. This is how Garmin provides data. I just show it without any delay. That is what i got. Thank you for review!

Ricochet On Ze Mix
October 2, 2019 | Version 1.2.0

Can't have seconds on fenix 3 HR

Developer Reply
October 31, 2019, Vlood

Seconds are visible in active mode. Please read description.

lailing
September 18, 2019 | Version 1.2.0

look great , but i cant change the colour even I saved in the setting.

Wojciech
September 8, 2019 | Version 1.2.0

Very nice, clean well design watch face. Move bar does not show on FR945. When "always on" seconds and HR will be available will be my favourite.

Developer Reply
September 9, 2019, Vlood

Thank you for review. HR and Move bar are working fine on FR945. Please check move bar status in you Connect IQ app, it may be disabled. Also check Clock32 settings. Same for HR. Seconds "always on" feature is in development.

69smir
September 7, 2019 | Version 1.2.0

Looks great! But much better on your pictures than on my watch (D2C)! Because there is bigger font on pictures. Would You pls make bigger font or possibility to change it? Thanks.

Developer Reply
September 9, 2019, Vlood

Thank you for review. Sorry disappoint you. It is a pity to have 4 stars because of you presumption that the font should be bigger. I do not even have screenshot of D2C watches here.

Sajeevan
September 1, 2019 | Version 1.1.9

Unable to change the hour, minute colour. After saving the changes, the settings reverts back to the default

D
August 19, 2019 | Version 1.1.9

One of the most readable, cleanest, complete, and well-designed watch face UIs available. I have one suggestion: make the seconds toggles like this: 1. off, 2. auto-move on (wrist), 3. always on. Someone left some nonsense comment about this being "rough around the edges", and I thought an actually accurate response was needed. I've tried 30-40 watch faces, and this is among the very best. Thank you to the developer for this great contribution.

Developer Reply
September 9, 2019, Vlood

Thank you so much for your words. Unfortunately i do not have a lot of free time to work on project. Thanks for the nice suggestions. Seconds "always on" is first priority feature now. It was implemented already but have some bugs need to be fixed.

Clément Dhormes
July 17, 2019 | Version 1.1.9

Great, but the Seconds display does not work!

Developer Reply
July 17, 2019, Vlood

Thank. Please check it properly. Try to raise your hand and see if they appear. It called active mode and it is described in app info.

Rob_Swinnen
June 21, 2019 | Version 1.1.9

The seconds indicator are inconsistently showing. Sometimes it shows, sometimes not..

Developer Reply
September 10, 2019, Vlood

This is how it meant to be. It called "active mode". You raise your hand - it shows. Please read the description.

Tom
June 9, 2019 | Version 1.1.9

Looks cool and good but even when my Bluetooth is connected it says its not but when i am in the app its say it's connected, i know its not a glitch but could you just have it indercated when you are.

Darko Vojinovic
May 29, 2019 | Version 1.1.9

Love it , would love to have ability to change size of HRS and MINS numbers separately so I can make the mins slightly smaller . Tactix C .

Kirk Trimby
April 12, 2019 | Version 1.1.9

Really doesnt look that good actually on the watch, looks pretty rough around the edges.

Sorry, no statistics available yet.