App Icon

Temperature

Description

GARMIN WARNING: This widget is intended only as a flight planning aid and is NOT for in-flight use and should NOT be used as a primary information source. The widget uses barometric altimeter data from the watch/device and it will not function properly in a pressurized environment and should not be used in a pressurized aircraft.</p><p></p><p>The Temperature widget is based *heavily* on Garmin built-in temperature widget (for the D2™ Bravo) but is designed to work with the Garmin tempe™.</p>

What’s New

Version 0.9.7</p><p> • added support for vivoactive 3</p><p> • added configurable display of fractional temperature</p><p></p><p>Version 0.9.6</p><p> • added support for displaying temperature from internal sensor (CIQ 2.1.x devices only)</p><p> • added support for D2 Charlie</p><p></p><p>Version 0.9.5</p><p> • changed colour of graph end pointer to white</p><p> • added support for Approach S60</p>

Requirements

Companion Hardware

Get the Hardware

Additional Information

Permissions

This app requires access to:

  • Sensor data (i.e., ANT+, heart rate, compass)
  • Heart rate, barometer, temperature, and altitude history
  • Approach® S60 Approach® S60
  • Captain Marvel Captain Marvel
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Darth Vader™ Darth Vader™
  • Descent™ Mk1 Descent™ Mk1
  • First Avenger First Avenger
  • Forerunner® 245 Forerunner® 245
  • Forerunner® 245 Music Forerunner® 245 Music
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 3 fēnix® 3, quatix® 3, tactix® Bravo
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® 6 fēnix® 6
  • fēnix® 6 Pro fēnix® 6 Pro, fēnix® 6 Sapphire
  • fēnix® 6S fēnix® 6S
  • fēnix® 6S Pro fēnix® 6S Pro, fēnix® 6S Sapphire
  • fēnix® 6X Pro fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar, tactix® Delta Sapphire
  • fēnix® Chronos fēnix® Chronos
  • MARQ™ Adventurer MARQ™ Adventurer
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain
  • MARQ™ Commander MARQ™ Commander
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
  • Rey™ Rey™
  • Venu Venu
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Mercedes-Benz® Collection vívoactive® 3 Mercedes-Benz® Collection
  • vívoactive® 3 Music vívoactive® 3 Music
  • vívoactive® 4 vívoactive® 4, GarminActive
  • vívoactive® 4S vívoactive® 4S, GarminActive S
Average Rating: (42 Ratings)

Aleksandra Ivić 🥋 🇭🇷
March 26, 2018 | Version 0.9.7-upd3

Hi. I have VA3 and I also have Garmin Tempe. Tempe works fine with activities but I just can't make it work with this widget. Any suggestion?

Developer Reply
March 26, 2018, DouglasR

Hi there. Please use the Contact Developer link so I can get more information and try to determine why this widget might not work properly with the vivoactive 3. Thanks!

Karl-Heinz Walter
December 30, 2017 | Version 0.9.6-upd1

Funktioniert super mit der Fenix5. Synchronisation mit Tempe dauert ca. 5 sec. Zusätzlich zur Temperatur lasse ich mir die aktuelle Höhe anzeigen.

Pascual 1959
November 26, 2017 | Version 0.9.6-upd1

Acabo de instalar en un fenix3 y no funciona.

Developer Reply
November 27, 2017, DouglasR

Hola. El widget requiere un sensor externo Garmin TEMPE para mostrar la temperatura en los dispositivos Fenix 3. *** Hi there. The widget requires a Garmin TEMPE external sensor in order to display the temperature on Fenix 3 devices.

Wilbur
November 1, 2017 | Version 0.9.6-upd

Does not work with vivoactive 3. Temp reading is always between 27-31.

Developer Reply
November 10, 2017, DouglasR

Hi there. The temperature reading you are seeing is the watch "internal" temperature, which is affected by your body heat. To get an accurate reading you require a TEMPE external sensor from Garmin. Once you watch is connected to a TEMPE the "internal" indicator will disappear and the temperature reading from the TEMPE will be displayed.

Cloudjang
September 9, 2017 | Version 0.9.6-upd

hope add temp point like 32.5℃

Mohamed Bel Haj Hassine
August 5, 2017 | Version 0.9.5-upd

Don't work on F5X

Developer Reply
August 9, 2017, DouglasR

Hi there. As I mentioned in our email conversation, you must have the Garmin tempe external sensor for this to work as this widget is only designed to display the readings from the tempe sensor.

DS-Garmin
August 4, 2017 | Version 0.9.5-upd

keine Anzeige bei Fenix 5x. Bitte noch einmal überprüfen und updaten.

Developer Reply
August 9, 2017, DouglasR

Hi there. As I mentioned in our email conversation, you must have the Garmin tempe external sensor for this to work as this widget does not read the internal temperature. Once you have the required tempe sensor the widget will work.

Ted S
March 25, 2017 | Version 0.9.3

It is very nice to see the temperature with the curved graph in addition to the numeric value. It would be better though to be able to configure the scale of the graph to at least have the range match that the external Tempe Sensor can measure. My Tempe will only read the temperature down to -20C and the specifications also indicate that this is the case so why have a graph go down to -40?

Alan
December 21, 2016 | Version 0.9.1

Good looking Widget, works excellent with the Tempe, look forward to see more from this developer ... Thanks

Liviu Popa
November 30, 2016 | Version 0.9.1

A very welcome graphical temp display (in comparison to the blunt text from the original temp widget). However, tempe has also the min/max values for the day. Would be nice to have 2 markers on the scale showing the min/max with some colours (blue/red) or simple indicators. Also, a third option for the bottom window should be the min/max temp values, after all it is a temperature widget, so I would like to have max info about temperatures :).

Developer Reply
December 1, 2016, DouglasR

Hi there and thanks for the feedback. Displaying the min/max is on my radar to do but unfortunately will require a lot more work as the widget would have to connect to the "tempe" directly instead of using the access through the watch. However, as I said, that is definitely on the list of things to add in the near future.

Denis Martin
November 26, 2016 | Version 0.9.0

Looks great but it won't let me display my elev in meters. Tried multiple times, even powered on/off, un/re-installed... nope.

Developer Reply
November 28, 2016, DouglasR

Hi there. The version you installed (the first release) did not display elevation; it only displayed *density altitude* (which is basically elevation corrected for temperature and pressure) because the widget was originally designed for pilots. The new version (0.9.1) now allows you to display the elevation or density altitude. You can configure both versions of the widget to use metres or feet using GCM or Garmin Express.

Michael Klingberg
November 16, 2016 | Version 0.9.0

Works perfect on Fenix Chronos !

Brian Brown
November 16, 2016 | Version 0.9.0

Nicely done! Recommended Temperature widget.

Sorry, no statistics available yet.