App Icon

Temps

Description

A simple widget to display the newest reading from the internal temperature sensor, as well as connecting to a Tempe sensor and display it's reading at the same time!</p><p>C or F is based on the "Temperature Units" set on your watch under Settings-System-Units.</p><p>A Tempe Sensor is needed to see the Tempe data</p><p></p><p>NOTE: On watches that have Connect IQ 1.x (like the fenix3), the int...

What’s New

0.16.1 - 645/645M support</p><p>0.18 - added support for Oregon, Rino, and GPSMAP 66

Additional Information

Permissions

This app requires access to:

  • Sensor data (i.e., ANT+, heart rate, compass)
  • Heart rate, barometer, temperature, and altitude history
  • Approach® S60 Approach® S60
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • ForeAthlete® 230J ForeAthlete® 230J
  • ForeAthlete® 235J ForeAthlete® 235J
  • ForeAthlete® 630J ForeAthlete® 630J
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • Forerunner® 230 Forerunner® 230
  • Forerunner® 235 Forerunner® 235
  • Forerunner® 630 Forerunner® 630
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 935 Forerunner® 935
  • fēnix® 3 fēnix® 3
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
  • GPSMAP® 66s / 66st GPSMAP® 66s / 66st
  • Oregon® 7 Series Oregon® 7 Series
  • Rino® 7 Series Rino® 7 Series
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Music vívoactive® 3 Music
  • vívoactive® HR vívoactive® HR
Average Rating: (28 Ratings)

Enrique Del paso
June 30, 2018 | Version 0.17-upd3

On my 235, no data is shown, tried to uninstall and reinstall it since I thought it needed an upgrade. But either way info ain't displayed...

Developer Reply
June 30, 2018, jim_m_58

The 235 doesn't have internal temperature data that's accessible, and as I explained in the email, you must have a tempe sensor to get data for that. If you have a 235 and don't have a tempe, there's no data available at all, so nothing to display.

Łukasz Tatys
June 29, 2018 | Version 0.17-upd3

Great and simple

jsanchezi
June 25, 2018 | Version 0.17-upd3

Nice design but temperature completely wrong. It says 93 degrees!!! Almost boiling... Probably something wrong with the sensor.

PERO.BS
May 1, 2018 | Version 0.17-upd1

Genau richtig, Anzeige interne und externe Temperatur, Verlauf, Min Max

Simon
March 2, 2018 | Version 0.17

Top

Jája
February 13, 2018 | Version 0.17

Shows only Tempe temperature, Internal "Not Available", F3 HR.

Developer Reply
February 13, 2018, jim_m_58

In the description of the App, you'll see that the internal data isn't available on all devices. It's not available on the f3 HR. (it has to be at least a CIQ2 device.)

Natxo Baile
February 11, 2018 | Version 0.16.1

In Vivoactive3 it just shows the internal temperature, that is about the skin surface temperature (31°C), completely useless. I have just found one app where the temperature is correct and it is included Gearmin Watchface, I guess it corrects the temperature by means of an offset, just an idea to improve your app

Developer Reply
February 11, 2018, jim_m_58

The tempe can take a minute or two to connect, and on the va3, the widgets time out in much less time. If you just tap the screen every 15 seconds, the widget timeout resets, and allows time for the connection to the Tempe to occur.

DzoLoMartelet
February 2, 2018 | Version 0.16.1

Works really well! I do not have the external Tempe sensor, but I discovered that the internal one on my Vivoactive hr is quite precise when I'm not wearing it and that when I'm wearing the device, the temperature is constantly overestimated by 5-6°C or around 10°F.

Christian
January 28, 2018 | Version 0.16.1

Works beautifully on the Fenix 5X.

Nicole van den Heuvel-Voskuil
January 24, 2018 | Version 0.16.1

I have a vivo active 3 and the tempe sensore bt it won't show the temperate of the tempe sensor. Every thing is connected but it won't show :-( what i am doing wrong?

Developer Reply
January 24, 2018, jim_m_58

Widgets time out very quickly on the va3, and the Tempe can take a minute to connect. Try again, but tap the screen every 15 seconds or so, as that resets the widget timeout.

andrej-svk
January 12, 2018 | Version 0.16

Finally my tempe sensor is usable with F5 (with F3 HR was not issue). It means widget can connect to sensor quickly instead of garmin default temperature widget. Thanks much!

andrej-svk
January 12, 2018 | Version 0.16

Finally my tempe sensor is usable with F5 (with F3 HR was not issue). It means widget can connect to sensor quickly instead of garmin default temperature widget. Thanks much!

andrej-svk
January 12, 2018 | Version 0.16

Finally my tempe sensor is usable with F5 (with F3 HR was not issue). It means widget can connect to sensor quickly instead of garmin default temperature widget. Thanks much!

Labrie JS 🇨🇦
January 2, 2018 | Version 0.15-upd

Great app, since you can't make the tempe graph, can you show the Alt tempe reading in the last 2-3 hrs. Any thing to have spme king of history. If not can you show the max and low internal and external temperature for the last 24 hrs.

Bernardo1985
November 6, 2017 | Version 0.15-upd

Muy buena aplicación. Funciona bien sobre el Garmin Fenix 5X. Como punto a mejorar, realizar una representación del gráfico más visual y legible. Recomiendo

Mark Elbogen
October 8, 2017 | Version 0.15

Great app. One question: is there a way to have a second graph which shows the graph of Tempe temperature as opposed to internal?

Developer Reply
October 9, 2017, jim_m_58

Since the widget only runs for a short time, it really can't collect the info to draw a graph for the Tempe. The internal data is collect by the Fimware, so that's easy to display.

JoseNG2
October 1, 2017 | Version 0.15

Very good widget. Could you create one like this but only with pressure?

Andrew Cotter
September 28, 2017 | Version 0.15

Installed it on my Fenix 3 and internal temp showing not available. Any suggestions?

Developer Reply
September 28, 2017, jim_m_58

See the first few lines in the app description: "NOTE: On watches that have Connect IQ 1.x (like the fenix3), the internal temperature will not be available"

Nathan Kofahl
September 27, 2017 | Version 0.15

Well done. This solves the problem of having a Tempe paired but not connected which makes the standard temperature widget useless.

KYS
September 13, 2017 | Version 0.15

This is great app!!! I have some question. I use vivoactive hr. Internal temperture displayed. But Tempe display 'None paired'. Plz solve this problem!

Developer Reply
September 14, 2017, jim_m_58

Do you have the Tempe paired in the Sensors on the va-hr? For this widget to see it, it must be paired there.

Cloudjang
September 9, 2017 | Version 0.15

Great for point!!

thr4
August 10, 2017 | Version 0.14-upd

Works very well and addresses a gap in watch native functionality (ability to see internal sensor temperature data when tempe is paired). Minor suggestion: allow customization of the date field (from MM/DD to DD/MM etc.) and UI cleanup (don't show version number on main widget screen as it doesn't really carry relevant information).

Lonely rolling
May 8, 2017 | Version 0.11

It's so simple widget that I love it so much. Temperature is a plain data that I always wanna know sometimes somewhere. Thank you.

Olivier
May 8, 2017 | Version 0.11

Could be perfect if it could display temperature in celsius degree. The option, If it exists, is not available for the forerunner 935. Pleaaaaase!

Developer Reply
May 8, 2017, jim_m_58

It can! It uses the setting on your watch form Settings, System, Units, Temperature Units. :)

lcxfdc
April 20, 2017 | Version 0.11

非常好!内置的外置的都显示,感谢作者。

Sorry, no statistics available yet.