October 22, 2023 |
Really liked this widget on my Venu 2S. Please add support for the Venu 3 series :)
October 23, 2023,
The venu3/3s have been added.
August 22, 2023 |
Really like this widget. I use it both on my Venu 2+ and my new Epix 2 Pro. One thing I wish for a future update is to have the graph use the full screen space instead of a small inner square. This would be great on my Epix as it has a 51mm watch face as it'll make it easier to read the highs and lows when I'm backpacking.
July 23, 2023 |
Thanks for Instinct 2X support. Some suggestions that comes in my mins:
- Min and Max temperature for Tempe and battery level for tempe (another widget has these, but yours is better imo)
- Alerts if set temperature threshold surpassed
- Offset option for connected Tempe if temperature sensor needs calibration
July 23, 2023,
Max. min, and battery aren't available if the tempe is natively paired and used in activities. Calibration of the tempe is problematic, in that that could change based on ambient temperature and sun exposure
April 15, 2023 |
Lo que estaba buscando. Muchas gracias
March 22, 2023 |
Application fiable, retirer la montre du poignet pour avoir la température exacte du lieu pour pas avoir la température corporelle
February 21, 2023 |
Handige widged om de temperatuur te zien op mijn Fenix7ss met mijn Garmin Tempe.
February 20, 2023 |
February 17, 2023 |
I can't set the temperature in celsius.Grace
February 18, 2023,
F and C are based on a setting on the watch itself. It's usually under Settings; System, Units, Temperature Units or something similar.
January 9, 2023 |
Just downloaded and set up this widget on my tactic charlie, works perfectly and is exactly what I was looking for. Great to be able to see both temp readings on one screen, simple perfection !
December 28, 2022 |
It just says (connecting) I can’t even use it.
December 28, 2022,
Do you have a tempe sensor and is it paired with your watch and within range? What you see happens if you don't have the external Tempe Sensor available.
Jen Emig 😺🐴☃️🍫
December 9, 2022 |
Easy access to reading from Tempe. I wish it would show the high & low readings.
December 2, 2022 |
Very satisfied, I needed that.
July 28, 2022 |
Hi! Can you please add temperature offset option for both internal and Tempe sensors? For example, I compared sensor readings to accurate thermometer and I want to calibrate it. Many watchfaces have this feature. The app itself is great and very simple.
July 30, 2022,
That's pretty impossible to get right with the internal sensor. Take the watch off, and it wouldn't be the same. If the ambient temp is high, it wouldn't be the same as if it was low. That's why this will also work with a Tempe, so you can get a much better reading for ambient
July 17, 2022 |
Can you add support for multiple Tempes? Thanks.
July 18, 2022,
I use the firmware to access the Tempe, and there you can only access one at a time, so this doesn't support multiple - only the first one the firmware sees.
April 29, 2022 |
Неплохо. Пока работает нормально. Спасибо.
February 22, 2022 |
Very pleased with performance and clean at-a-glance look. Bravo!
January 23, 2022 |
Works great and show temperature from Tempe just fine!
January 15, 2022 |
How can the temperature setting be changed to read only as Celsius?
January 16, 2022,
It's a regular setting on your watch. It's often under settings-system-units-temperature units, but can vary based on specific device. After you change it, git the widget 15 minutes to reflect the change.
January 12, 2022 |
Neat little widget , have yet to try it with a Tempe but works pretty well without it. As indicated by the dev , if you want ambient temperature just remove the watch for 30 mins to get an ambient temperature reading !
December 21, 2021 |
Widget works well on my Venu 2, but I saw that Edge 830 is not supported.
Though it shows temperature on the screen when it's 0°C or above.
Minus data are not shown.
Is there a chance that Edge will be supported in the future?
December 21, 2021,
Edge devices are different, in that they don't support the tempe at all, don't have internal temperature history, etc.
December 21, 2021 |
on the display of my approach S60 the temperature that appears is not correct. Now for example 74.6 ° ??
December 21, 2021,
It is the temperature of the watch, so impacted by both your body temperature as well as the ambient temperature. If you take off your watch and lay it down for 20-30 minutes, it will show ambient, as you eliminate the body temperature part.
December 7, 2021 |
I cannot see the internal temperature of my Fenix 3 watch.
I see the following:
Line 1: temps 0.24
Line 2 : Tempe
Line 3 : two blue line (I do not have my Tempe sensor right now)
Line 4 : (connecting)
So nothing about the internal watch temperature
December 8, 2021,
The fenix 3 doesn't support the internal temperature, nor do other newer devices without a baro altimeter.
It's a limitation of the devices themselves and not the widget.
December 5, 2021 |
Non vedo la temperatura sul dispositivo
December 6, 2021,
Not all devices provide the temperature. You won't see it on the fr55,fr245,venu sq, for example.
December 2, 2021 |
Easy to set up and clear accurate well done ☺️☺️
November 23, 2021 |
please add graph for tempe to make it perfect
November 24, 2021,
That would require a long term connection with the Tempe in a background process, and that's not possible.