Ebike Field can connect directly to E-bikes with ANT support and show state of battery charge and assist mode level. App is fully usable for free, donators will additionally get rendering graphs with ebike metrics to Garmin Connect. Please read whole description before use.</p><p></p><p>For newer EDGE devices, please make sure you disconnect eBike sensor in Garmin settings first as it can't be used together with Ebike Field - only one will have connectivity due to limitation on Garmin side, so you have to decide which want you want to use. </p>
Ask via contact form before reporting issue to review sections, thanks! And make sure to fill there your email or I would not be able to respond.</p><p>3.1.6 - Venu3 series</p><p>3.1.5 - Epix 2 Pro , Fenix 7 Pro , Approach S70</p><p>3.1.4 - new devices</p><p>3.1.3 - new devices; ability to configure custom assist level names in the app configuration! (if you get wrong mapping after the setup, try to map names to new numbers again - there is some bug on Connect IQ platform which prevent me to have correct behaviour from the beginning. )</p>
This app requires access to:
Gianpiero Bologna
July 16, 2022 |
Version 3.0.3
Dopo vari tentativi sono riuscito a configurare la mia Orbea Rise con questa applicazione, la consiglio
Andrew Ebling
July 10, 2022 |
Version 3.0.3
I've used this app for a couple of years now and it's great - I really like being able to see current assistance level and battery % on my Garmin.
Jon Dolman
June 30, 2022 |
Version 3.0.3
This is working fine on my Edge 520 on Turbo Levo but no connection to my Merida EP8 E160. Are there issues with Merida or the EP8 motor?
Philippe
June 15, 2022 |
Version 3.0.2
Very good but don't work with new Garmin Edge 1040... I hope a new version for this.
Remy Dominique
June 8, 2022 |
Version 3.0.2
Hello, Just downloaded to try but all mode descriptions are showing as numbers (0-1-3-5) ? not the real one like "Eco-Sport-Turbo" My bike is a new "Turbo creo sl comp carbon evo" and I try to unpair the bike in the "Garmin Connect" but always get an error "Error Saving Settings" so I can't set "Paired Bike to 0".... Does it works with a new "Turbo creo sl comp carbon evo" I mean can we get the info concerning the cadence, power etc...? Thanks in advance for your support and if it work I will make a donation. Cheers
Franco Gentile
May 16, 2022 |
Version 3.0.2
is it possible to have it read both the internal battery and the extender with a Turbo Levo SL?
Simon Laland
May 12, 2022 |
Version 3.0.2
Great app! Nerd version is even better, but sadly not available on my device Fenix 6. If you are have issues with the mode descriptions showing as numbers after the latest Specialised firmware update, unpair the bike in the app and then it add back again, it fixed the issue for me!
RUSE
April 23, 2022 |
Version 3.0.2
Some users are complaining because Ebike Field doesn't works no more with last turbo levo firmware update. It’s true, but It isn´t problem APP. Ebike Specialized turbo levo don`t run protocol ANT+ since the last firmware update. None field date (cadence, etc) is showed now in Garmin device, only battery charge and assist mode level. You must to open a issue in Specialized.
Developer Reply
April 24, 2022,
JanCapek
Hi, the ANT+ should still work, but the bikes changed its identifications. Please try to reset paring adding zero to Bike ID field in the app settings. It should then work again, but you will not get assist mode description now, only numeric numbers. New update which will solve this is in the development!
AlfreDoss
April 18, 2022 |
Version 3.0.2
With last TCU firmware only shows numbers instead assist modes. I also had to pair my bike again (as other paired sensors) because firmware had changed bike code, from 5 to 4 digits.
Walter
April 16, 2022 |
Version 3.0.2
with last turbo levo firmware update doesn't works no more. Please fix it! Thanks
JohnCCLing
April 14, 2022 |
Version 3.0.2
Was really good , showed the watts I was putting in and what power setting I was in with % of battery left. However with the new firmware update on my Specialized Turbo Levo Gen 2 in last 48hrs. It all stopped. Using Garmin 520Edge
Hulli
April 14, 2022 |
Version 3.0.2
Still a good app but the description did not work properly with Turbo levo 2019 and Garmin Edge 830. I saw only the numeric value...brgds Frank
Olivier
March 27, 2022 |
Version 3.0.2
Work fine with my Orbea Rise H. Nice to be compatible with my Edge 130 witch is not yet supported with Orbea RS Toolbox
juanma
March 9, 2022 |
Version 3.0.1
It is very unstable, sometimes it works fine and other times it doesn't connect, when I turn off the Garmin 130 you have to uninstall it to connect again. Orbea rise, shimano ep8, display sc-e7000.
Kerry Norman
January 24, 2022 |
Version 2.0.3
Using this on a Garmin 830 I have formatting issues with the display. Depending on the field size the incorrect font points are used and the read out is too small. I also have an issue where on longer rides it just stops working. Usually when it gets to around 50% battery or a couple hours. Sometimes it will restart to display the % some time later and then stop again, sometimes it just stops. If it actually worked I might consider a donation but it is currently unreliable.
Developer Reply
January 24, 2022,
JanCapek
Hi, the font size issue on Garmin 530/830 is bug on the side of Garmin and I am unable to affect it within the app - as it is universal across whole Garmin portfolio. Please report it to Garmin and lets hope they will fix it someday finally. Not sure what causes mentioned dropouts in your case.
Lance Cousins
December 4, 2021 |
Version 2.0.3
Works brilliantly with edge130/Orbea Gain M20 - Gives confidence on long & hilly rides
Claudio Valente
November 30, 2021 |
Version 2.0.3
Ian White
November 26, 2021 |
Version 2.0.3
Perfect for my Edge 530 and Levo. All connected like a charm.
fou du cintre
September 26, 2021 |
Version 2.0.3
Dès que je mets en marche le Gamin pour appairer mon giant E trance+ l'appli fonctionne puis disparaît au court de la sortie dommage..!!!
Mikael Stendahl
September 12, 2021 |
Version 2.0.3
Excellent for Specialized Turbo owners. Could include more info though such as range, motor and battery temperatures, Assist mode data such as assistance percentage etc. i.e. configuration info that Mission Control supports.
Jaan Spitz
September 12, 2021 |
Version 2.0.3
OMG Orbea! Why making the activation process so cumbersome?! Why even have a unlock process at all? I had to put in multiple pw, switching sites and your process does not work as advertised. After 2 hours reading your manual and doing everything you proposed and the app is still not unlocked, or maybe it is?! I love my Orbea Rise, But this is just unacceptable! The app would probably be nice if it just worked after installing. I also installed "Ebike Field" of JanCapek: 1 min installing. 2 Minutes adding the data field to the edge 1030 and fenix 6 and it just works. That's how it should be. Apparently Orbea does not respect their customers!
Roman Göttel
August 14, 2021 |
Version 2.0.3
Harvey Miller
July 26, 2021 |
Version 2.0.3
Excellent addition to the data field for ebikes but for one item, it doesn't account for an Extended Battery. The best feature is that this app will allow two useful readouts in one data field It's maximum readout is 100% so though you'll be able to deal with this Extended Battery limitation by noting that your main battery will discharge slower, it won't tell you the total charge remaining with an added battery. What would be super great would be to add more ebike data (i.e., estimated range remaining, battery temperature, etc.).