App Icon

Stryd IQ

Description

How to use:</p><p>1. Grab your Stryd running power meter (Buy here: https://store.stryd.com)</p><p>2. Scroll through the apps on your watch and find Stryd IQ</p><p>3. Open the app and press ENTER to start</p><p>4. Move your Stryd power meter so the app can find it</p><p>5. Press ENTER to confirm, then you can start an activity</p><p></p><p>If you receive a message saying 'device update is needed': https://www.stryd.com/support#express-update</p>

What’s New

October 9, 2019: Added support for Garmin Venu</p><p></p><p>September 13, 2019: Layout adjustments for new watches</p><p></p><p>September 10, 2019: Added device compatibility</p><p></p><p>August 18, 2019: Enabled Air Power for new Stryd</p><p></p><p>June 26, 2018: Add Vivoactive 3 Music support.</p><p></p><p>June 20, 2018: Add Fenix 5 Plus series support.</p><p></p><p>March 14, 2018: Add Descent MK1 support.</p>

Requirements

Companion Hardware

Get the Hardware

Additional Information

Permissions

This app requires access to:

  • Send/receive data via ANT radio to/from third-party sensors
  • Send/receive information to/from the Internet
  • FIT files (activity recordings)
  • Record additional information into activity files
  • GPS location
  • Sensor data (i.e., ANT+, heart rate, compass)
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • ForeAthlete® 230J ForeAthlete® 230J
  • ForeAthlete® 235J ForeAthlete® 235J
  • ForeAthlete® 630J ForeAthlete® 630J
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • ForeAthlete® 920XTJ ForeAthlete® 920XTJ
  • Forerunner® 230 Forerunner® 230
  • Forerunner® 235 Forerunner® 235
  • Forerunner® 245 Forerunner® 245
  • Forerunner® 245 Music Forerunner® 245 Music
  • Forerunner® 630 Forerunner® 630
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 920XT Forerunner® 920XT
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 3 fēnix® 3, quatix® 3, tactix® Bravo
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® 6 fēnix® 6
  • fēnix® 6 Pro fēnix® 6 Pro, fēnix® 6 Sapphire
  • fēnix® 6S fēnix® 6S
  • fēnix® 6S Pro fēnix® 6S Pro, fēnix® 6S Sapphire
  • fēnix® 6X Pro fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar
  • fēnix® Chronos fēnix® Chronos
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
  • Venu Venu
  • vívoactive® vívoactive®
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Music vívoactive® 3 Music
  • vívoactive® 4 vívoactive® 4, GarminActive
  • vívoactive® 4S vívoactive® 4S, GarminActive S
  • vívoactive® HR vívoactive® HR
Average Rating: (46 Ratings)

Dominic
October 12, 2019 | Version October 9, 2019

Distortion o.f screen on the Venu. Also not able to leave the app, needs to restart the watch.

Conte de Fleckenstein
September 28, 2019 | Version September 13, 2019

I miss the HR and the fact that the zones are not synchronized

Frank K
September 25, 2019 | Version September 13, 2019

I have send him an e-mail with a picture of the screen as you guys also have an issue with, cutting it off. It's been taken care of. Frank.

Kevin Smith
September 20, 2019 | Version September 13, 2019

Same as John on the Fenix 3. All fields now cut off.

John Beninati
September 15, 2019 | Version September 13, 2019

Upgraded my watch from Garmin Fenix 5 to Garmin Marq Athlete and now the fields are cut off. What is the point of using the Power app if you cant read the output.

Developer Reply
September 16, 2019, StrydTeam

John, can you please send pics of where the fields are cut off to [email protected], that way we can get this issue fixed for you. Thanks and sorry for the inconvenience.

Daniel Paradis
July 11, 2019 | Version May 2, 2019

Great app. Seems however to have a problem with the display with the Forerunner 945. Numbers in the fields are somewhat outside of the screen.

Casper V
May 28, 2019 | Version May 2, 2019

Great app, all information present. Would it be possible to add some kind of alert so it's easier to work in a certain zone, or at a preset power? Just like the PowerRace app, for example.

Debaets Stevie
March 31, 2019 | Version June 26, 2018

Hi, My stryd foodpod works great. But my stryd pioneer doesn't shou power data? (cadans and hrm works)

Bernhard Em
February 5, 2019 | Version June 26, 2018

When i use this running app on my fenix 3 i always get every 5 miles a autolap. iam not amused about this. is there an option to deactivate this?

Paul
February 1, 2019 | Version June 26, 2018

Zone 4 and zone 5 colors are too similar. Change them. Also, having current time would be nice.

Oliver Morphett
November 20, 2018 | Version June 26, 2018

DOES NOT WORK WITH VIVOACTIVE 3 MUSIC. It is designed for square screen

TMK17
November 17, 2018 | Version June 26, 2018

As stated by others, it would be a much better app if HR was added and the ability to show what sensors are connected other than just the Stryd.

MaxM83
October 9, 2018 | Version June 26, 2018

Working great on Fenix 5 Plus! It would be great to customise app field, for instance to add HR. It doesn’t be showed during the run, the avg at the end of the training is 0 but luckily it’s correctly recorded. However it’s pretty useful to check HR while running in order to understand the physical status. It would be also useful to see if external heart rate monitor has been connected. However, the Stryd app it was the reason when switching from Suunto Spartan to Apple Watch. Of course the AW it couldn’t be enough for playing sports, so I’m really happy to find the Stryd app also for my new Fenix 5 Plus. Please, add field customisation! :-)

GS71_趙元 Y.Chao
September 3, 2018 | Version June 26, 2018

Works normal on my VAHR. But mapping "enter" to touch screen is really a bad idea. Please change to use hardware buttons. Thank you!

Franky Wong
June 29, 2018 | Version June 26, 2018

There are two apps: Stryd IQ (widget) and Stryd Power (data field), but I could not find documentation about their difference. Stryd's Getting Started online steps said to install Stryd Power, but does not mention this Stryd IQ widget...

Dhooge David
December 10, 2017 | Version October 3, 2017-2

It would be great to have an Efficiency Index and Normalized Running Power

Tim
October 4, 2017 | Version October 3, 2017-2

It would be great if there's an option to create workouts or sync the training plan on PowerCenter.

Mike Trudell
September 25, 2017 | Version July 19, 2017

Works great on the 920XT. Only request I have is the ability to display a zone instead of wattage output. If I'm conducting a workout and want to run in Zone 2, it would be great to see that I'm in zone 2 per my preset run power zones.

Mariano Trozo
July 22, 2017 | Version July 19, 2017

The apps is ok, with lot of screens including the stryd power metrics. However the pace and average pace is not ok.

Matthew
June 24, 2017 | Version March 31, 2017

Useful and well designed app, however watch does not vibrate when set to autolap as it would using the normal garmin run functionality (FR 235). Also if feasible it would be useful to be able to select the source of pace and distance data, i.e. should be able to select pod as distance source as internal watch GPS is inaccurate in the FR 235 (stryd is one of the most accurate distance monitors, would be useful to be able to utilise this functionality). I have been using the watch in indoor mode to force it to use the pod for distance however that has its limitations as elevation data is not recorded or the GPS track. (note that there is a setting on the FR 235 to use a footpod for instantaneous pace, however lap, average pace and distance comes from the GPS and on the FR 235 you can't force these metrics to come from the pod unless you put the watch in indoor mode). Also as others have raised above it would be usefull to be able to customise the data fields if feasible. Note this isn't a big issue as the app developers have been quite logical with the selection of metrics and there isn't much i'd personally change. For example in some instances when working on form it might be useful to display cadance with power and pace low cadence is often linked to poor efficiency.

João Antunes
June 19, 2017 | Version March 31, 2017

I have used the app with my Garmin 735XT. When a strava segment warning showed on screen the app freezed and the activity closed. It was very annoying. A 10 Km run was splitted into 3 activities. There is also a lack of basic customization (1Km laps for instance). I am not happy at all. I will give it a another try outside the app, using run mode.

Cesar J
May 17, 2017 | Version March 31, 2017

The application is fine but it would be great to be able to change the screen fields or at least add the cumulative ascent, data field essential for trailrunning. Dynamic sensor metrics can only be viewed in this application. It would be nice to be able to use them as data added as it does with the iQ stryd simple power field application. It is not possible to access settings while using the application, for example to turn the light to automatic mode near the sunset if the watch is in manual light

semiliko
April 24, 2017 | Version March 31, 2017

Great to have power whilst running, but would love ability to customise data screens within Stryd IQ app, e.g. one screen with 3s power and average lap power.

Developer Reply
May 5, 2017, StrydTeam

Hi semiliko, Thank you for the suggestion. We will look to bring more customizable options to the Stryd IQ app. If anyone is looking for a customizable option, please find the 'Stryd Power' data field on the app store. The 'Stryd Power' data field lets you place a power field directly in the run mode on your watch. Best, Angus & the Stryd Team

Daniel Moncayo
April 11, 2017 | Version March 31, 2017

Working great with the 920xt.

Jacob Ibing
December 25, 2016 | Version December Update

In the right direction: Need more customization and more live metrics to be top notch. (FR735 and F3)

Sorry, no statistics available yet.