vPower

Carlos Lemus
January 29, 2019 | Version 1.9-upd3

Great app. i want to know if there is a chance to get the 20m value too.

xuxumatu
October 23, 2018 | Version 1.9-upd3

Best estimated power, is there a way to print on garmin connect best 20 min power??

Bernard Coumelongue
October 13, 2018 | Version 1.9-upd3

resultats correct jusqu a la derniere mise a jour. depuis en montée resultats tres bas et proche de zero. que se passe t il?

Jose Moreno 🇪🇸🇮🇨
October 8, 2018 | Version 1.9-upd3

This application is useless.

Felix Fromm
August 26, 2018 | Version 1.9-upd3

I thought at least this will be a good "live" estimate, especially going uphill but there must be some serious problems with the maths involved (or how data is provided by garmin). I would have liked the numbers displayed but strumbling around with 300 W on a recovery ride, pretty unrealistic... I have a feeling that aerodynamic drag/rolling resistance is massively overestimated in standard configuration, e.g. going a bit downhill with no preassure on the pedals generated watt numbers around 250 W To summarize: Better display hm/h and the gradient on your garmin to give you a feeling on how hard you are pressing the pedals, or get a powermeter...

xuxumatu
August 22, 2018 | Version 1.9-upd3

there ara some strange peaks on descents https://connect.garmin.com/modern/activity/2925174226

Claudio Stefanini
July 11, 2018 | Version 1.9-upd3

app doesn't work on climb or anytime that the gradient change...on climb goes to zero on descent calculate too much watt...works better till some months ago...but now unuseful

Jorge
May 7, 2018 | Version 1.9-upd

Warning MTB fans, this app is based on speed, so for guys like me, is not useful, I had a power of 280 watts descending and 15 watts in a steep climbing. No make sense for MTB. Is clear that the programmer did an excellent job for other kind of bikes,Road, Triathlon etc.

Bernard Coumelongue
May 5, 2018 | Version 1.9-upd

pas de resultats coherents sur fenix 3hr ,meme au dessus de 40 TOURS MINUTES RESTE A 0

redwoods5
April 17, 2018 | Version 1.9-upd

I use this with a fixed gear bike and Garmin 520. It seems like the app doesn't recognize the grade of hills: going uphill (low cadence, slower speed) I get pretty low power estimates. Going downhill (sometimes 140+ cadence and 30+ mph) vPower is 450w+. That's the opposite of the power meter readings on my other bike. The app seems pretty accurate on flats and low grades. Any thoughts?

GJFN 🇭🇳
April 13, 2018 | Version 1.9

Thanks for a great app, great service from developer. Data very accurate. Thanks.!!

Elfil Force
April 1, 2018 | Version 1.8.3

Works just perfekt. Very nice app. Thanks!

Jan E
March 28, 2018 | Version 1.8.3

Works perfect. Gives a really good watt estimate on the ride, and all data is available in Garmin Connect afterwards. Great work :-)

xuxumatu
March 25, 2018 | Version 1.8.3

Now with the peaks corrected is the best of the bes iq app for estimated power thanks a lot you save me a powermeter!!

Stephan Jacobs
March 23, 2018 | Version 1.8.2

I used to be quite happy with the data shown. But the new release with the “no cadence“ option does not make any sense at all. Is there a possibility to use the app without this nonsense?

Alan Inns
March 2, 2018 | Version Version 1.8.1

Great for what it is, downloaded 5 different virtual power data field apps for my Fenix 3 hr, and tested against my Garmin power meter, and this was by far the most accurate and stable. I just wish the data shown, could be uploaded to Connect with the rest of the ride data, is that even possible????

Jaime Martín Granda
February 13, 2018 | Version 1.80-upd1

You also could match the values that calculate with BPM... With BPM you have another way to calculale Power. Maybe both inaccurate ways to calculate virtual power would be better tan one :) And decide if do an average or a weighted average towards one or another depending of the moment (Changes of bpms, altitude, cadence or so...) As powercal, with a little TEST with a real power sensor at home (in the trainer) you could calibrate or ask for results to get BPM/power rates and so... Then when going outside with any bike without power sensor, trying to estimate it better... In example for me at this moment, at constant efforts aprox: 167W - 115bpm 228W - 140bpm 274W - 159bpm 319W - 177bpm 365W - 185bpm

Henrik Kliebhan
January 31, 2018 | Version 1.80

A few weeks ago. VPower only collect peaks of data while cycling. I replace the sensor but nothing happend. All other sensor on different bikes show the same result. What has happend ??

the_hard_law
January 21, 2018 | Version 1.80

Is ok in the flat route. During the climb it don't work beacuse don't read the % of slope and set wrong power ( normally from 10 to 70 watt max) . To calcolate the power the reading of the slope is necessary. I hope to use it with the next upgrade .

Itay Rousso
December 27, 2017 | Version 1.80

Hi, I wonder if other have experienced it, but since the last update I am getting very low values - avg of 25W with a max of 65W... Before the last update it was all working properly - the only difference is that I changed the average value to 10 seconds, I changed it back to 3 in the middle of the ride but it had no effect... Before this update it was working really nice.. any idea? Itay

Iñigo
December 9, 2017 | Version 1.80

It doesn't work on my edge 1030. I obtain amazing high power values descending, while power is close to 0 climbing. It seems that calculation is not taking into account my weight and/or bike's, although they are correctly set in my profile (me) and in the data field configuration (bike)

ManuKuota
November 28, 2017 | Version 1.80

awesome, I use it since the day one, always improving.. the only problem, the beginning of the ride is very often a peak about 1000 watt or more, so the power graph on the website becomes less visible.. sometime I press the start button while moving on a flat road not pushing on pedals and it helps, but not always..

xuxumatu
November 24, 2017 | Version 1.80

Great update now it works and i think it´s very accurate a little bit overestimated on aceleration but when i see the fit in connect i see a peaks with 65500 watts i hope you can fix this thanks https://connect.garmin.com/modern/activity/2348323931

Hairil_Karim
November 21, 2017 | Version 1.80

tq for providing the update. now successfully installed at my edge 520. contacted garmin supported previously they said might due to mine is taiwan version...

Hairil_Karim
November 17, 2017 | Version 1.7.1-upd1

why it say apps not compatible when im trying to install at my edge 520 devices? pls help.