App Icon

TrainingPeaks Daily Workout

Description

Start building your workouts with 30 Days Free Premium or choose a Free Kickstart Training Plan and give the IQ App a test ride now. https://www.trainingpeaks.com/garmin</p><p></p><p>There is nothing more satisfying than a workout that has been performed to perfection. With the TrainingPeaks Connect IQ app, you can complete your daily structured workouts right on your compatible Garmin device. Load compatible workouts built using the TrainingPeaks Workout Builder and complete them in real time through your device, using Heart Rate, Power, or Pace targets.</p>

What’s New

v1.0.6</p><p>* Added Support for Descent™ Mk1</p><p>* This is will be the last version with support for the Forerunner 735XT.</p><p></p><p>For support issues, please contact our Customer Success Team at:</p><p>https://help.trainingpeaks.com/hc/en-us/requests/new</p><p></p><p>PLEASE NOTE THAT THE FOLLOWING FIRMWARE, OR HIGHER, IS REQUIRED FOR THIS APP</p><p>Edge 520 – v11.10</p><p>Edge 820 – v6.30</p>

Requirements

Companion App

Download on the App Store Android App on Google Play

Additional Information

Permissions

This app requires access to:

  • Send/receive information to/from the Internet
  • Saved information such as courses, routes, waypoints, tracks or workouts
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • Edge® 1000 Edge® 1000
  • Edge® 1030 Edge® 1030
  • Edge® 1030, Bontrager Edge® 1030, Bontrager
  • Edge® 520 Edge® 520
  • Edge® 520 Plus Edge® 520 Plus
  • Edge® 820 Edge® 820
  • Edge® Explore 1000 Edge® Explore 1000
  • Edge® Explore 820 Edge® Explore 820
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 935 Forerunner® 935
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
Average Rating: (292 Ratings)

Ali Magboul
February 20, 2019

Love it

Daniel Göthberg
February 12, 2019

Hi, is it possible to get more than one activitie dowloaded per day ? some days you have 2 training sessions in calender schedule and want to dowload them at same time. //D

Developer Reply
February 14, 2019, TrainingPeaksIQ

All of the downloaded workouts are saved on the device, so you can access them later. So yes it is possible to download two workouts to the device and then do the workouts later in the day. When you get the screen that asks you what sport type you would like to use, the workout is already downloaded and stored on your device. At that point you can hit the back button and download the other workout. On an Edge device you can find the workouts under Training - Workouts. They will be listed by name. On a 935, Fenix, etc the workout menu can be accessed after you select a sport type. These instuctions should get you there https://www8.garmin.com/manuals/webhelp/forerunner935/EN-US/GUID-3AA7B50B-EBE5-4A29-A15A-316849BA9BDB.html

Miguel Angel Alonso
February 11, 2019

Currently, training peaks for Garmin 1030 does not work. It appears "Error unknown" constantly, What does it happen?

Developer Reply
February 14, 2019, TrainingPeaksIQ

Please contact our support team, they should be able to help. https://help.trainingpeaks.com/hc/en-us/requests/new

Jim
February 3, 2019

I would rate it higher if I could get the power scale to display the numbers like the display on the app info page, except modifying for running, (ie the same way HR and Pace work). I only get the dumbbell icon. I had to create/modify a separate page to display the power data. If we're to work, I'd give a 5 star. But not until it works the same as HR and Pace for runners.

Developer Reply
February 4, 2019, TrainingPeaksIQ

We totally agree that this is something that needs to be figured out. This is currently affecting all running power data fields: Stryd, Runscribe, and even Garmin's own Run Power. We have passed this request to both Garmin and Stryd and hope that they can come up with a solution. This is a limitation, or feature, of the CIQ platform. CIQ apps and data fields are unaware of other CIQ apps and data fields so they can not communicate between each other. Running power data fields displays a value with the label "Power", and we humans interpret that value as running power, but the device/machine does not know that this value should be interpreted as power. That gap is what is causing the issue. The TrainingPeaks app is only used to download the .FIT workout file, that contains the instructions for your workout, on to the device. Once you are performing the workout, the screen you are using is Garmin's workout screen. Garmin gets around this issue by not letting users set power targets to run workouts. That is not something we plan to remove from the TrainingPeaks workout builder.

M.Murcia
February 3, 2019

La aplicacion en si no esta mal , pero podria indicar algun dato mas. Por ejemplo la cadencia y que la medicion de la potencia no sea instantanea ,que sea a 3 segundos . Tambien seria bueno la opcion de poder alargar un intervalo pulsando algun boton , ya que muchas veces no es la zona idonea para empezar el siguiente y toca pararlo hasta el sitio mas idoneo.

Developer Reply
February 4, 2019, TrainingPeaksIQ

Thank you for reviewing our app. This help page shows how to use the lap button to extend workout steps. https://help.trainingpeaks.com/hc/en-us/articles/115003385172-Open-ended-steps-for-Structured-Workouts If youn eed additional help, our support team can assist you in Spanish https://help.trainingpeaks.com/hc/en-us/requests/new

René Hald
February 2, 2019

I get on my Garmin an "Error -400". This is when I try to get my daily workout from my TP-coach. Have been doing so for a week now and he has no clue. Any chance your might be able to assist ? Cheers, René

Libor IM
January 25, 2019

Hello, I have problem with downloading my training plan from training peaks. System write on display workouts next downoalding and next only logo trainingpeaks. I have version 1.0.6. my colleague have 1.0.4. and he has not problem. Can you help me please? Thanks Libor

Developer Reply
January 25, 2019, TrainingPeaksIQ

If it looks like the workouts are being downloading but then the app just goes back to the TrainingPeaks logo, the fix is to delete the older workouts that have been previously downloaded to your device. Connect IQ apps can not delete files from the device, so this has to be done manually. To delete the older workouts, plug your device into your computer, go to /Garmin/Workouts, and then delete all the files in that folder. After that you should be good to go. These instructions can be found here as well. https://help.trainingpeaks.com/hc/en-us/articles/360001378972-TrainingPeaks-Daily-Workout-IQ-app-FAQ-and-Troubleshooting

NOEL Vincent
January 23, 2019

Peut être pas assez de recul pour être pertinent avec mes 5 étoiles. Interface vraiment complète, propre et intuitive sur PC malgré l'exhaustivité de l'outil pour construire son plan. Le builder est parfait, beaucoup plus simple que sur garmin (copier/coller/déplacer, paramétrage, bibliothèque...). une petite frayeur au début pensant que cela ne synchronisait pas avec ma montre (F5) car j'avais le message "no structured workout" qui veut simplement dire que la session programmée n'a pas été préparée avec le builder... qu'il s'agit donc d'une sortie libre...mais commentée en durée ou distance (pas besoin de programmer un entrainement sur la montre pour une sortie aussi simple...). Aucun problème dès lors que la session a été programmé avec le builder. Appli smartphone à la hauteur et tout aussi simple. Il n'est pas possible de partager un plan personnel d'entrainement avec les poto depuis nos garmins et garmin connect, avec training peaks, cela devrait l'être... c'est ce que l'on recherchait.... nickel (bon 10€/mois.. ça pique à voir si l'ensemble des autres fonctionnalités justifie ce prix)

Daniel Crabbe
January 23, 2019

considering this is the only 'easy' way to quickly get workouts from TP to a Garmin device its terrible. Might work once but then stops often when you need it most.

ClaudioM73
January 22, 2019

Garmin Edge 520 issue - Trying to connect for the first time with TP app. Garmin device is paired but when I select on the TP app on my garmin device to use for the first time I keep receiving the "Error Unkown?" Message. I have turned the Garmin device on/off but the same error message.

Michael Harvey
January 21, 2019

I just bought a Fenix 5x and nothing will upload on it. Tried customer service, but they just send me the same links I find on line. NO HELP AT ALL. What happened to real customer service where someone talks to you on a phone. I know, I'm outdated and no one does that anymore. But you pay this much for a watch and it's benefits and you get robotic customer service. If you actually need help, this company will NOT help you. Most of the watch works ok, but God forbid you actually need a human being to explain something to you. The company thinks all we have to do all day is sit in front of our computer and try their suggestions. Like none of us actually have a life to live. I'll stop the ranting, I think you get the point.

Developer Reply
January 22, 2019, TrainingPeaksIQ

I can assure you that we do not have robots answering our support tickets. But a few of them can sure pedal a bike like a T-800. We currently do not offer phone support, so I encourage you to stay the course with the email support and our team will get you up and running with the app. A few things to know about our Connect IQ app. 1. It only shows you the workouts for the current day, and 2. It only shows you workouts that have not been completed yet. Hopefully that helps!

Rich Lovelock
January 19, 2019

Can't see what i'm doing wrong but getting 'no structured workouts found'. Have followed trouble shooting, done all updates, have a single 'bike' workout on today in training peaks calendar created with workout builder, not working (Edge 520), waste of an hour mucking around with this, ended up dragging workout file on to device

Developer Reply
January 19, 2019, TrainingPeaksIQ

A couple of things to try. 1) If you have more than one TrainingPeaks account make sure you are logged in to the app with the correct account 2) the app only downloads workouts for the current day, so make sure that your time zone setting is correct in TrainingPeaks and that the date and time on your device is correct. I have seen times, when doing a lot of indoor training with the GPS turned off, that the device's date and time can become incorrect. Especially after a firmware updates or forced reset. If none of that works, then contact our support team and they should be able to get you up and running. https://help.trainingpeaks.com/hc/en-us/requests/new

Vicky
January 18, 2019

I purchased a training plan and followed all the steps to have the plan downloaded to my watch (Garmin Forerunner 935) but for some reason the workouts don’t appear when I open Training Peaks under activities. My plan doesn’t start until Monday.... do I have to wait until then for the scheduled workouts appear? Or should they be accessible to view as soon as I downloaded the plan to my watch? I would appreciate any advise anyone can provide. Thank you!

Developer Reply
January 18, 2019, TrainingPeaksIQ

The app only downloads the workout for the current day, so if you do not have anything planned on your calendar for today then you should see the message "No Structured Workout Found". On Monday you should see your workout for that day. You can test ahead of time by planning a workout for Saturday or Sunday. This FAQ has more information that should help you get up and running. https://help.trainingpeaks.com/hc/en-us/articles/360001378972-TrainingPeaks-Daily-Workout-IQ-app-FAQ-and-Troubleshooting

Marce
January 8, 2019

I use the App every day and It works perfectly but the only thing I really need and I'm not able to do is to create my scheduled workouts using running power data instead of pace or distance. I use the stryd sensor for power. The app allows to create the workout based on power (FTP) but during the workout the app doesn't not show any information about power or alerts if you are up or down the target you set. With that, it'd be perfect for me.

Developer Reply
January 8, 2019, TrainingPeaksIQ

We totally agree that this is something that needs to be figured out. This is currently affecting all running power data fields: Stryd, Runscribe, and even Garmin's own Run Power. We have passed this request to both Garmin and Stryd and hope that they can come up with a solution. This is a limitation, or feature, of the CIQ platform. CIQ apps and data fields are unaware of other CIQ apps and data fields so they can not communicate between each other. Stryd's data field displays a value with the label "Power", and we humans interpret that value as running power, but the device/machine does not know that this value should be interpreted as power. That gap is what is causing the issue. The TrainingPeaks app is only used to download the .FIT workout file, that contains the instructions for your workout, on to the device. Once you are performing the workout, the screen you are using is Garmin's workout screen. Garmin gets around this issue by not letting users set power targets to run workouts. That is not something we plan to remove from the TrainingPeaks workout builder.

Malcolm Isaacs
January 8, 2019

EDGE 520 PLUS - When trying to open Training Peaks in Connect IQ I get Unknown Error. Anyone have a solution for this please or direct me to where I can find it, Thanks

Developer Reply
January 8, 2019, TrainingPeaksIQ

This FAQ has more information that should help you get up and running. https://help.trainingpeaks.com/hc/en-us/articles/360001378972-TrainingPeaks-Daily-Workout-IQ-app-FAQ-and-Troubleshooting

Edgar Montalvo Escamilla
January 7, 2019

User since Jan 2018, but since the last update the issue of having the training peak logo at the end again has not been resolved. Already deleted the previous workouts and still having the same issue. It worked on my Edge 530 plus, but no on my Fenix 5s. Need help ASAP

Developer Reply
January 7, 2019, TrainingPeaksIQ

Hi Edgar, The app itself has not been updated in a while so that is not the issue. But we agree that it is confusing when the IQ stores shows a date that makes it appear that the app has been updated in the past month even though it has not been. What is going on is, when Garmin releases a new device that our app is compatible with there is some monkey business that goes on behind the scenes so that our app can be installed on that new device and the updated date for our app gets modified. For the issue you are experiencing, if it looks like the workouts are being downloading but then the app just goes back to the TrainingPeaks logo, the fix is to delete the older workouts that have been previously downloaded to your device. Connect IQ apps can not delete files from the device, so this has to be done manually. To delete the older workouts, plug your device into your computer, go to /Garmin/Workouts, and delete all the files in that folder. After that you should be good to go. These instructions can be found here as well. https://help.trainingpeaks.com/hc/en-us/articles/360001378972-TrainingPeaks-Daily-Workout-IQ-app-FAQ-and-Troubleshooting

Moris Bangoura
January 7, 2019

Great app If you want to manage your training calendar from Trainingpeaks. Works OK on Fenix 5x plus. Comparing to Garmin Connect Structured Trainings I miss seeing Training Notes with details of current and next workout step. Is it possible to see them somehow on the watch during training? Seems Trainingpeaks app is not exporting Workout notes to the Workouts.

Developer Reply
January 7, 2019, TrainingPeaksIQ

Thank you for the review of the app. We are looking at adding the step notes to the .FIT Workout file. We will let you know when that happens.

Julian
January 7, 2019

Does not sync completed workout results back to TrainingPeaks (have linked the GarminConnect and TrainingPeaks accounts). Support tells me that I should expect to what 4-7 DAYS for workout results to appear back in TP. Well I waited... nothing, what a joke.

Developer Reply
January 7, 2019, TrainingPeaksIQ

When you connect your TrainingPeaks and Garmin account to sync completed activities, Garmin controls when all of your past workouts are sync'd to TrainingPeaks. Typically this happens after you completed your next activities but sometimes it takes longer. It is best to work with our support team on this specific issue as it is not specific to the IQ app.

Alessandro Di Candia
January 5, 2019

The app work well on my 820 but i want to ask the possibility to add many other field, because when i follow the structured training of my coach i can't see the rpm or the 3 sec power.

Developer Reply
January 6, 2019, TrainingPeaksIQ

Thank you for reviewing our app! Once you are performing the workout you are no longer in the TrainingPeaks CIQ app, instead you are back in Garmin's workout interface. We are not able to directly make any modifications to Garmin's workout interface, but we can send your feedback to the the team at Garmin. We have already sent them a request that at least one of the data fields on the workout screen be customizable. This would allow you to add cadence or 3sec power. Until then, you can still access all the other workout screens on your 820, just swipe left/right as usual. Even when on on the workout page, you will still get power alerts and notifications when starting the next step and what the new target is.

Steve C
December 31, 2018

My coach uses TP to set me training sessions, the app does not seem to load these into my Garmin Edge 520 and I am having to do this manually by importing the .fit file from TP's into my Garmin for each session!!!

Developer Reply
January 2, 2019, TrainingPeaksIQ

This FAQ has more information that should help you get up and running. https://help.trainingpeaks.com/hc/en-us/articles/360001378972-TrainingPeaks-Daily-Workout-IQ-app-FAQ-and-Troubleshooting

Ray Jasicki
December 24, 2018

New update broke the downloading of structured workouts that were built in workout builder again. This happened in one of the previous updates. If I remember correctly, had to manually delete the old training files off the watch and then everything worked correctly again. That sound right?

Developer Reply
December 28, 2018, TrainingPeaksIQ

Hi Ray, The app itself has not been updated in a while so that is not the issue. But we agree that it is confusing when the IQ stores shows a date that makes it appear that the app has been updated in the past month even though it has not been. What is going on is, when Garmin releases a new device that our app is compatible with there is some monkey business that goes on behind the scenes so that our app can be installed on that new device and the updated date for our app gets modified. For the issue you are experiencing, if it looks like the workouts are being downloading but then the app just goes back to the TrainingPeaks logo, the fix is to delete the older workouts that have been previously downloaded to your device. Connect IQ apps can not delete files from the device, so this has to be done manually. To delete the older workouts, plug your device into your computer, go to /Garmin/Workouts, and delete all the files in that folder. After that you should be good to go. These instructions can be found here as well. https://help.trainingpeaks.com/hc/en-us/articles/360001378972-TrainingPeaks-Daily-Workout-IQ-app-FAQ-and-Troubleshooting

Emmett "Buddy" Pate
December 23, 2018

Works well on my fenix 5 with the exception of the "too many workouts" issue (which is actually an issue with CIQ - not the app itself). I wish they'd add support for the VivoActive 3 Music, however. There doesn't seem to me any reason why the app shouldn't be compatible.

Developer Reply
January 2, 2019, TrainingPeaksIQ

Buddy, thank you for reviewing our app. We are working with Garmin on a solution to the to many workouts issue. As for the VivoActive3, the watch does not support the CIQ feature for downloading content, which our app requires.

Joachim Andersen
December 16, 2018

App justs works as promissed on my fenix 5x thanx

Luis
December 15, 2018

This app is not working at all, it will not bring in the data. I have even purchase the training plan from training peaks, sonit should be in the correct formar. My watch say no structure workouts found. This should be happening.

Developer Reply
December 17, 2018, TrainingPeaksIQ

The app requires that the workout was created using the TrainingPeaks Workout Builder. If not, you will see the No Structured Workouts message. The interval information is what the device uses to guide you through the workout. This FAQ has more information that should help you get up and running. https://help.trainingpeaks.com/hc/en-us/articles/360001378972-TrainingPeaks-Daily-Workout-IQ-app-FAQ-and-Troubleshooting

Andres Carrillo
December 12, 2018

Hi, downloaded and it says it doesnt find any structured workout... I do have a coach that uploads daily workouts...

Developer Reply
December 12, 2018, TrainingPeaksIQ

The app requires that the workout was created using the TrainingPeaks Workout Builder. The interval information is what the device uses to guide you through the workout. This FAQ has more information that should help you get up and running. https://help.trainingpeaks.com/hc/en-us/articles/360001378972-TrainingPeaks-Daily-Workout-IQ-app-FAQ-and-Troubleshooting

Sorry, no statistics available yet.