App Icon

ISS (International Space Station)


This widget displays the ISS location and its orbit. You can timeshift in past and future. It also displays list of next passes, and lists astronauts currently onboard.</p><p></p><p>IF YOU GET IQ! ERROR, PLEASE CHANGE SETTINGS TO LOW RESOLUTION</p><p></p><p>-- WIDGET --</p><p>- ISS location is calculated and displayed as a green dot (no need for internet connection)</p><p>- The calculated orbit...

What’s New

1.0.7 Optimized for low-memory devices (Forerunner, Vivoactive, Chronos...). For these devices, high resolution is not available in rotation/timeshift mode. For all devices, when going back from rotation/timeshift to initial screen, settings are retained. </p><p>1.0.6 Attempt to fix IQ error and to optimize processing time. Added settings to input max points to display on map.</p><p>1.0.3 Tweak...

Additional Information


This app requires access to:

  • Send/receive information to/from the Internet
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Edge® 1000 Edge® 1000
  • Edge® 1030 Edge® 1030
  • Edge® 520 Edge® 520
  • Edge® 820 Edge® 820
  • Edge® Explore 1000 Edge® Explore 1000
  • Edge® Explore 820 Edge® Explore 820
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 935 Forerunner® 935
  • fēnix® 5 fēnix® 5
  • fēnix® 5S fēnix® 5S
  • fēnix® 5X fēnix® 5X
  • fēnix® Chronos fēnix® Chronos
  • Oregon® 7 Series Oregon® 7 Series
  • Rino® 7 Series Rino® 7 Series
  • vívoactive® 3 vívoactive® 3
  • vívoactive® HR vívoactive® HR
Average Rating: (25 Ratings)

22 July 2018 | Version 1.0.10

#-Stars (Neutral Rating Until Resolution) Seems to "work" (no error messages) on my EDGE 1000, However, nothing is displayed other than the 3-bar Menu button and the Back button. Blank screen, no map or ISS location. When I open the Menu and choose "Next Passes" I see the error message "Comm error -104". I also see this error when I select "Who Is UP". I have WiFi enabled and there is a connection (the EDGE reports a WiFi connection and I can see the device in my router log). Activities routinely upload using WiFi so I know the EDGE has an Internet connection. What am I doing wrong... what am I misunderstanding?

Developer Reply
31 July 2018, JuliensLab

Please contact me with "contact developer" link. This way you can send me video/picture of the screen and data log so I can understand what goes wrong. It seems to be a communication issue, which is very strange because it works perfect on the Fenix 5. Maybe the Edge needs a different program. Please contact me!

🌳🏕Sam lawrence🌲🐿
5 July 2018 | Version 1.0.10

Also working on:::::::: Fenix 5x software version beta ::::::9.71::::::::::and with the CIQ updated to:::::::: 3.0.0.... All the best...

🌳🏕Sam lawrence🌲🐿
24 June 2018 | Version 1.0.9

This widget seems to be up and running again......with the added bonus of a flat and globe Earth choice :--) Really missed this glad to have it back again.....thankyou Developer! :--) Fenix 5x software version 9.20 latest public release.

26 May 2018 | Version 1.0.7-upd3

Doesn’t work at all on a Fenix 5. Just an error message.

Jelle Ten Hove
14 May 2018 | Version 1.0.7-upd3

Sorry - it doesn't work with the vivoactive 3. I get an IQ! error.

Brian Moghadam
30 April 2018 | Version 1.0.7-upd3

Sorry - doesn't appear to work for D2 Charlie. IQ! Error

5 April 2018 | Version 1.0.7-upd2

No funciona en Fenix 5X. V.8.0 En anterior software si. V7.9 IQ ERROR. espero el dasarroyador

3 April 2018 | Version 1.0.7-upd2

Doesnt appear to work on Oregon 7XX

17 March 2018 | Version 1.0.7-upd2

Uninstalled and reinstalled on my 5x, doesn't work at all

Stephen W. Traver
15 March 2018 | Version 1.0.7-upd2

IQ Error on 5X running 8.00

Theo Weststrate
13 March 2018 | Version 1.0.7-upd2

Crashes on Fenix 5 !

9 February 2018 | Version 1.0.7-upd

Using my son's account to test with the Vivoactive hr:::: Using 350 points will display the IQ error screen on app start. 300 points will work for a while but then the IQ screen will appear. 250 points with 8 minutes works perfectly, with all options and screens. So now working perfectly with the Vivoactive great running 4.30 software. All the best. Samuel lawrence.

🌳🏕Sam lawrence🌲🐿
8 February 2018 | Version 1.0.7-upd

Superb update!!! As well as all the extra features, I can now choose my own level of detail within GC that works with my watch. For instance using 350 points on the globe would give me the IQ error screen on app start, where as with 300 points selected would be fine, and I'll have full use of the app. This seems to be a great solution to watch memory limitations. Max I can run with full use of the app is: 300 points with maximum number of passes. ( Fenix 5x Beta software 7.91) Thankyou very much for all your continuing development! All the best, Sam.

Friederike Wulf
24 January 2018 | Version 1.0.7

Does not work on my vivoactive hr. Please let me know when it does, I'd love to have it.

Developer Reply
25 January 2018, JuliensLab

Hi! Thanks for feedback. It's a tough app to make due to performance limitation, which is different on every device and I can only test on my D2 Charlie. To solve your problem, could you try to go in the widget settings (on your phone / Connect app / Widgets / ISS Widget / Settings). - Set Number of map points to around 50 or 100 (less land will be displayed) - Set Minutes between orbits to 15 (the orbit will be displayed in a very approximate manner) This should help, and then you can improve those settings until you reach the limit. Unfortunately, I haven't found a better way yet! Let me know your results!

Juan Manuel Acuña
17 January 2018 | Version 1.0.3

Dos not work in my 5x. IQ problem.

Developer Reply
21 January 2018, JuliensLab

I updated the app to fix the issue. Try again now and let me know if it works.

Brenda Cabaniss
16 January 2018 | Version 1.0.3

Would love to use it but it's not working on my Vivoactive 3 or husband's Vivoactive HR :(

Developer Reply
17 January 2018, JuliensLab

Noted. I also see an error on my end. It is proving quite difficult to display so much complexity (world in 3D projection, orbits) with so little processing power. But I am confident it will work - just requires a bit more work on my end. If you are willing to test the app on your specific device, contact me with "Contact Developer" link. This way, I can send you the file before publishing to ensure it works on your device too. So far, I can only test on my D2 Charlie.

Stephen W. Traver
8 January 2018 | Version 1.0.3

With the latest update, this widget now works fine on 5X running the latest beta! Thank you for this update!

8 January 2018 | Version 1.0.3

5 stars now :) thanks for update. Now working on f5x. Dev now answered. My mails where at spam folder.

4 January 2018 | Version 1.0.2 upd

Also not working at f5x FW 7. tried to contact dev twice, but does not answer.

Stephen W. Traver
2 January 2018 | Version 1.0.2 upd

Not working with 5x on 7.54B. Nice concept and I hope it's updated!

🌳🏕Sam lawrence🌲🐿
2 January 2018 | Version 1.0.2 upd

This is now fully working with my Fenix 5x latest public software release 7.10. Thankyou for all the hard work!! Features: Displays your current location! You can scroll the earth with "start" button, for a different angled view.(earth will turn automatically by itself to track iss) Accurate positioning (checked with online tracking software!) Orbital path! Will track iss with internet conection, or WITHOUT !! using your algorithms(brilliant) Really enjoying this very useful and unique exciting widget! All the best, Sam.

18 December 2017 | Version 1.0.1-upd

Can‘t use it. Brings an „IQ!“ error. F5x FW 7

🌳🏕Sam lawrence🌲🐿
5 December 2017 | Version 1.0.1-upd

This is going to be one awsome widget! (Had it working at times) It will be extremely handy to be able to locate and view ISS especially if used in conjunction with your other widgets,(space x and solor system live) I love what your doing in the IQ store,and i really like the new trajectory info page and countdown in Space x! All the best, Sam. Fenix 5x 6.0

4 December 2017 | Version 1.0.1-upd

I agree this is awesome!!! Good luck.

3 December 2017 | Version 1.0.1-upd

This is awesome! Totally supporting your project!

Sorry, no statistics available yet.