02 January 2019 | Version 0.25.1
Haakon Jondal Helle
15 October 2018 | Version 0.25.1
One of the built-in data fields I missed on my forerunner 235 - simply great!
09 October 2018 | Version 0.25.1
Really nice field. The only improvement I wish would be made would be made is that the current position would be marked with an arrow pointing in the direction I was facing or moving. Sometimes it is difficult to tell if I missed a turn until I have walked enough distance to differentiate the paths. I doubt a zoom function could be added, but if it could that would also help on longer walks.
16 September 2018 | Version 0.25.1
Very useful app, works without any issues for me.
24 August 2018 | Version 0.25.1
Great, realy useful.
(Would be nice if user could zoom in/out and scroll.)
25 August 2018, jim_m_58
The memory for this one is VERY tight on some watches, so I can't add much, and there's also very limited (or not any) user input available to data fields.
25 May 2018 | Version 0.23
I wear my VA3 on my left wrist with the button facing to the left as well. The data field compass appears to be upside down. Google maps says I am facing north but the data field says I am facing south.
25 May 2018, jim_m_58
This is a Firmware problem with the va3 that I reported back when it came out. The firmware reports the heading, and I just display what the firmware tells me. When you switch the button to the other side, the firmware does not adjust to that for the compass. You can see the same if you add the garmin heading date field to an activity.
15 April 2018 | Version 0.22
Phantastin tool and absolutely always on since I came from a FR310XT to the FR235 and were missing it first.
Only one thing: When pausing the activity after around 90 minutes for a break and then resume the activity the bread crumbs of the first 90 min before the break were lost and only the straight line from the starting point was left.
Am I doing something wrong???
15 April 2018, jim_m_58
I'll take a look at the code, because with a pause, you shouldn't lose the first part. Use Contact Developer, and mention how long you've paused for,etc.
13 March 2018 | Version 0.21-upd1
Love it in VA, although I would like to see distance available in VA. If the app allow zoom would be perfect!
13 March 2018, jim_m_58
The amount of memory for a data field is limited, and more so on the va than newer devices, so adding zoom likely can't be done. I could add total distance on the va, but that would reduce the size of the chart. I'll look into it for full screen layouts on the va. .
13 February 2018 | Version 0.21
Great application. Simple and useful GUI. Quite good projection of track details. Battery consumption does not increase.
I see also downside, but only one. In my opinion the ratio betwen X and Y axis should be fixed 1:1, so that the shape of track will by alwas in shape of real track.
Now I see that the span of track is expanded on full screen independly for each axis. So ex. if my track has 9km vertical span and only 1km in horizontal, then the track looks not natural on the screen. At least on my FR 230.
13 February 2018, jim_m_58
That's kind of a tricky thing. Consider the vahr vs a round watch. 1:1 would look different between the 2. I went with lat range vs lon range for scaling, as that give the most detail on any device.
08 February 2018 | Version 0.21
После включения паузы отключается на forerunner 235
08 February 2018, jim_m_58
When you resume, it will start back up.
29 January 2018 | Version 0.21
Vraiment pas mal. J'aimerais pouvoir changer le. Couleur du fond en noir.
25 November 2017 | Version 0.20.1-upd
It would be nice to add a scale grid.
24 November 2017 | Version 0.20.1-upd
Good, but I would love to be able to zoom in order to see where to go to go to the start point when I'm around (On the chart, I'm on the point, but in reality I'm not.)
Also, it could be nice to display an arrow to show if we are running up/down/left/right of the chart.
20 November 2017 | Version 0.20.1-upd
thank you !
but I still have a meesage :
"needs differention DP"
what did I do wrong !?
20 November 2017, jim_m_58
Which watch? On most it must be used on a data screen set up for a 1 or 2 field layout
02 August 2017 | Version 0.19-upd
Great little app working as data field! Proving a full overview of your run map. Much better to native 735XT implementation where you see a zoomed in part with no way to zoom out.
17 July 2017 | Version 0.19
wanted this for a long time. thanks
11 May 2017 | Version 0.18
thank you for made it . its good if its can zoom in and out. this application rise vaule of fenix 5x up .
Ricardo Sappia 🇦🇷
19 February 2017 | Version 0.16-upd
I love this data field! works great and it is very useful when you go to new places :)
01 February 2017 | Version 0.16-upd
Je ne comprends pas comment la faire apparaître sur l'écran de mon vivoactive HR
01 February 2017, jim_m_58
It's like any other data field. If you for example, go into "run Settings" for run, and then data screens, you can pic a screen you want it on, then select 1 one or 2 filed layout, you then file find this under "Connect IQ" when you pick what you want in the data field.
16 January 2017 | Version 0.16-upd
after you're taking a break and the garmin switches to standy-mode, the chart doesn't show the way between start and resting-point anymore (a straight line appears). if possible, please improve it. apart from that, the data field is great and gives correct infos.
31 December 2016 | Version 0.16-upd
Нравится реализация и идея! Очень круто сделали
27 December 2016 | Version 0.16-upd
Great app! Fits the whole map on a screen, nice idea about showing direction of current run with a little letter. Something that 735 should have built-in in the first place!
04 November 2016 | Version 0.16-upd
tengo el forerunner 235 y no me deja verlo en tamaño grande como aparece en la imagen. solo en una esquina de la pantalla
12 November 2016, jim_m_58
Are you using a 1 field layout or a 2 field layout? For the full screen version, it needs to be a 1 field layout
20 October 2016 | Version 0.16-upd
Me he descargado la app pero no me aparece en el reloj, por ninguna parte.
No se como funciona
22 October 2016, jim_m_58
The data field will appear unter "Connect IQ" when you select a data field. You get to in in the same way you change to a native data field.
29 September 2016 | Version 0.16
Good app, ist would be great if a zoom function could be added.( e.g. press and hold down button), to zoom in larger tracks.....
29 September 2016, jim_m_58
Memory is tight in this data field, and also, data fields don't have access to buttons. Sorry!