App Icon

Stryd IQ

Description

How to use:</p><p>1. Grab your Stryd running power meter (Buy here: https://store.stryd.com)</p><p>2. Scroll through the apps on your watch and find Stryd IQ</p><p>3. Open the app and press ENTER to start</p><p>4. Move your Stryd power meter so the app can find it</p><p>5. Press ENTER to confirm, then you can start an activity</p><p></p><p>If you receive a message saying 'device update is neede...

What’s New

June 26, 2018: Add Vivoactive 3 Music support.</p><p></p><p>June 20, 2018: Add Fenix 5 Plus series support.</p><p></p><p>March 14, 2018: Add Descent MK1 support.</p><p></p><p>October 3, 2017: Add Vivoactive 3 support.</p><p></p><p>August 9, 2017: Make instructions clear.</p><p></p><p>June 26, 2017: You can update your power zones using the computer or phone!</p><p></p><p>1. Connect your watch t...

Requirements

Companion Hardware

Get the Hardware

Additional Information

Permissions

This app requires access to:

  • Send/receive data via ANT radio to/from third-party sensors
  • Send/receive information to/from the Internet
  • FIT files (activity recordings)
  • Record additional information into activity files
  • GPS location
  • Sensor data (i.e., ANT+, heart rate, compass)
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • Descent™ Mk1 Descent™ Mk1
  • ForeAthlete® 230J ForeAthlete® 230J
  • ForeAthlete® 235J ForeAthlete® 235J
  • ForeAthlete® 630J ForeAthlete® 630J
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • ForeAthlete® 920XTJ ForeAthlete® 920XTJ
  • Forerunner® 230 Forerunner® 230
  • Forerunner® 235 Forerunner® 235
  • Forerunner® 630 Forerunner® 630
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 920XT Forerunner® 920XT
  • Forerunner® 935 Forerunner® 935
  • fēnix® 3 fēnix® 3
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
  • vívoactive® vívoactive®
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Music vívoactive® 3 Music
  • vívoactive® HR vívoactive® HR
Average Rating: (34 Ratings)

MaxM83
09 October 2018 | Version June 26, 2018

Working great on Fenix 5 Plus! It would be great to customise app field, for instance to add HR. It doesn’t be showed during the run, the avg at the end of the training is 0 but luckily it’s correctly recorded. However it’s pretty useful to check HR while running in order to understand the physical status. It would be also useful to see if external heart rate monitor has been connected. However, the Stryd app it was the reason when switching from Suunto Spartan to Apple Watch. Of course the AW it couldn’t be enough for playing sports, so I’m really happy to find the Stryd app also for my new Fenix 5 Plus. Please, add field customisation! :-)

趙元 Yuan Chao
03 September 2018 | Version June 26, 2018

Works normal on my VAHR. But mapping "enter" to touch screen is really a bad idea. Please change to use hardware buttons. Thank you!

Franky
29 June 2018 | Version June 26, 2018

There are two apps: Stryd IQ (widget) and Stryd Power (data field), but I could not find documentation about their difference. Stryd's Getting Started online steps said to install Stryd Power, but does not mention this Stryd IQ widget...

Dhooge David
10 December 2017 | Version October 3, 2017-2

It would be great to have an Efficiency Index and Normalized Running Power

Tim
04 October 2017 | Version October 3, 2017-2

It would be great if there's an option to create workouts or sync the training plan on PowerCenter.

Mike Trudell
25 September 2017 | Version July 19, 2017

Works great on the 920XT. Only request I have is the ability to display a zone instead of wattage output. If I'm conducting a workout and want to run in Zone 2, it would be great to see that I'm in zone 2 per my preset run power zones.

Mariano Trozo
22 July 2017 | Version July 19, 2017

The apps is ok, with lot of screens including the stryd power metrics. However the pace and average pace is not ok.

Matthew
24 June 2017 | Version March 31, 2017

Useful and well designed app, however watch does not vibrate when set to autolap as it would using the normal garmin run functionality (FR 235). Also if feasible it would be useful to be able to select the source of pace and distance data, i.e. should be able to select pod as distance source as internal watch GPS is inaccurate in the FR 235 (stryd is one of the most accurate distance monitors, would be useful to be able to utilise this functionality). I have been using the watch in indoor mode to force it to use the pod for distance however that has its limitations as elevation data is not recorded or the GPS track. (note that there is a setting on the FR 235 to use a footpod for instantaneous pace, however lap, average pace and distance comes from the GPS and on the FR 235 you can't force these metrics to come from the pod unless you put the watch in indoor mode). Also as others have raised above it would be usefull to be able to customise the data fields if feasible. Note this isn't a big issue as the app developers have been quite logical with the selection of metrics and there isn't much i'd personally change. For example in some instances when working on form it might be useful to display cadance with power and pace low cadence is often linked to poor efficiency.

João Antunes
19 June 2017 | Version March 31, 2017

I have used the app with my Garmin 735XT. When a strava segment warning showed on screen the app freezed and the activity closed. It was very annoying. A 10 Km run was splitted into 3 activities. There is also a lack of basic customization (1Km laps for instance). I am not happy at all. I will give it a another try outside the app, using run mode.

Cesar J
17 May 2017 | Version March 31, 2017

The application is fine but it would be great to be able to change the screen fields or at least add the cumulative ascent, data field essential for trailrunning. Dynamic sensor metrics can only be viewed in this application. It would be nice to be able to use them as data added as it does with the iQ stryd simple power field application. It is not possible to access settings while using the application, for example to turn the light to automatic mode near the sunset if the watch is in manual light

semiliko
24 April 2017 | Version March 31, 2017

Great to have power whilst running, but would love ability to customise data screens within Stryd IQ app, e.g. one screen with 3s power and average lap power.

Developer Reply
05 May 2017, StrydTeam

Hi semiliko, Thank you for the suggestion. We will look to bring more customizable options to the Stryd IQ app. If anyone is looking for a customizable option, please find the 'Stryd Power' data field on the app store. The 'Stryd Power' data field lets you place a power field directly in the run mode on your watch. Best, Angus & the Stryd Team

Daniel Moncayo
11 April 2017 | Version March 31, 2017

Working great with the 920xt.

Jacob Ibing
25 December 2016 | Version December Update

In the right direction: Need more customization and more live metrics to be top notch. (FR735 and F3)

dukestah
25 December 2016 | Version December Update

waiting desperately for heart rate and auto lap customization of data fields would be a plus overall, quite poor utilization of the hardware (foot pod)

Will$
07 December 2016 | Version November Update

The pace is way off and fluctuates a lot. It's very temperamental and uninstalled it self from my 235. It is a step forward though I'll give them that.

Uwe Sauer
06 December 2016 | Version November Update

very disappointing.The watch (Garmin 920 ) finds the stryd sensor (Power and Heartrate) but in 8 out of 10 runs the power and the heartrate isn´t displayed. Second big minus is the battery. have to change the battery 2 times a month. Maybe it becomes better but at this stage, it is useless.

DS-Garmin
18 November 2016 | Version LaunchImprove4

auf der Fenix 3 wird kein Garmin Brustgurt erkannt bzw. keine Herzfrequenzdaten angezeigt. Bitte nachbessern.

ernie stefely
05 October 2016 | Version SeptemberV4

On Fenix3 - convoluted running sensor install, poor YouTube help, shows power on watch, still trying to get power into Garmin Connect. They are trying very hard to fix, it's just time consuming for me. I'd rather just install and run (a lot.)

Michael
30 September 2016 | Version SeptemberV4

Would be nice to customize the fields. The default fields may not work for everyone. I would like to show cadence + power + distance on the same screen and not have to switch back and forth while running. Just 1 example.

Engelbert
26 September 2016 | Version SeptemberV3

Leider keine Herzfrequenzanzeige, keine Auto Lap, für mich nicht zu gebrauchen

Christian Neukamm
16 September 2016 | Version SeptemberV3

G235 no problems

Michael
29 August 2016 | Version LaunchV4

This has been very frustrating. I train with power on the bike and really wanted to leave that power training was here for running but can get the IQ app to work or the power center on the webpage. I'm thinking I wasted $200.

WesHurrell
25 August 2016 | Version LaunchV4

Worked once but then just get exclamation mark like other review below. Very frustrating.

Corro Ergo Sum
25 August 2016 | Version LaunchV4

It works with fr 630. Sometime crashes during the start

renancamponez
24 August 2016 | Version LaunchV4

Worked the first time on my 920xt, after that only getting the exclamation point.. Already tried to uninstall and reinstall multiple times and is still not working!

Sorry, no statistics available yet.