App Icon



My grandpa was watchmaker and I am programmer and runner ;) ...This is analog watch face with five hands displaying some useful data like Sunrise/Sunset*, current phase of the Moon, altitude, daily steps and their progress towards the goal, 7-days history chart, burned or active calories, walked distance, heart rate**, etc. Highly configurable.</p><p></p><p>(*) For Sunrise/Sunset computation th...

What’s New

IMPORTANT: This watch face is FREE, but its development took me a lot of hours and I'm still trying to make it better (there were more than 70 upgrades until now :). Therefore, if you like it and use it regularly - please make a small donation to my PayPal account: or here (anything of a price of coffee would be highly appreciated ;) Thanks!</p><p></p><p...

Additional Information


This app requires access to:

  • GPS location
  • Heart rate, barometer, temperature, and altitude history
  • Your Garmin Connect™ fitness profile
  • Approach® S60 Approach® S60
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • ForeAthlete® 230J ForeAthlete® 230J
  • ForeAthlete® 235J ForeAthlete® 235J
  • ForeAthlete® 630J ForeAthlete® 630J
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • Forerunner® 230 Forerunner® 230
  • Forerunner® 235 Forerunner® 235
  • Forerunner® 630 Forerunner® 630
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 935 Forerunner® 935
  • fēnix® 3 fēnix® 3
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
  • vívoactive® 3 vívoactive® 3
Average Rating: (511 Ratings)

Thomas Brumme
17 October 2018 | Version 6.81-upd

It's my favorite watchface so far, but I'm not able to configure the watchface, so that a second hand is shown. The second hand mode is enabled, but nothing changes. Please help. I use this skin on my fenix5

Developer Reply
17 October 2018, mbell-SVK

Hi, there is no permanent second hand on this particular watch face, only second hand which is displayed upon gesture in full power mode. In such case the pointer in upper sub-face shows seconds for short period (instead of remaining battery percentage). It is also indicated by changed color of central point in the upper sub-face. This watch face is too complex to have implemented permanent second hand even on newer devices.

13 October 2018 | Version 6.81-upd

i love this face, but for some reason i can t customize it in my fenix 5x plus.

Developer Reply
13 October 2018, mbell-SVK

That's because CIQ watch faces cannot be customised from the device!!! You have to use Garmin Connect or Garmin Express app.

01 October 2018 | Version 6.81-upd

My everyday watchface since months ago. From time to time I'd try something new just or change, and after a few hours I inevitably come back to Hands Five: it's the cleanest, neatest and most informative one so far.

Developer Reply
01 October 2018, mbell-SVK

I'm really pleased to hear that. Thanks! :)

01 October 2018 | Version 6.81-upd

Great app! But, where can I read the description :-)?

Developer Reply
01 October 2018, mbell-SVK

Thanks for your feedback! Look for the watch face screenshot with the legend in the app's description page. In case there is still something unclear, please contact me via "contact developer".

Carsten Müncheberg
21 September 2018 | Version 6.81-upd

Great design, showing all the data I need, highly configurable, definitely my favorite analogue watch face. In my humble opinion the only thing missing for perfection is a DND (do not disturb) indicator.

Developer Reply
01 October 2018, mbell-SVK

Thank you very much for your feedback! New development must be considered carefully taking into account HW limitations of the supported devices. This is quite complex app reaching already limits for some of them.

chris hawkesworth
30 August 2018 | Version 6.81-upd

It's great. Would just like a second hand or counter. There is a button but doesn't seem to do anything. Am I missing something?

jesus ferrera
20 August 2018 | Version 6.81-upd

I find it great, beautiful and elegant. Would it be possible to have the total diary ascent? regards.

18 August 2018 | Version 6.81-upd

Have loved this face since getting the watch last year. BUT at some point the left face stopped including bike distance, both in the total and in the bar graph. Did I inadvertently change a setting?

Developer Reply
18 August 2018, mbell-SVK

Not you but Garmin changed that in their firmware. Bike distance is not included in total distance. It includes only walked and runned distance, you cannot change that via settings.

Yannig Beyet
16 August 2018 | Version 6.81-upd

Preffered one. Only lack a stair counter.

Cadran Waldner
15 August 2018 | Version 6.81-upd

It looked nicer on the picture than on my Fēnix 3 but I like it!!!

11 August 2018 | Version 6.81-upd


04 August 2018 | Version 6.81-upd

How do I get the sunrise/sunset to display in lower field?

Developer Reply
04 August 2018, mbell-SVK

Read description!

18 July 2018 | Version 6.81-upd

Great, current using, Can bottom Sub-face display dual Time? in stead of sunrise/sun set. This seem more flexible.

Christian Lubas
13 July 2018 | Version 6.81-upd

Is it a bug or only me when ticking „disable signature“ also all 5 minutes marker are removed as well? Thanks for investigating and for your efforts for this nice work! Device: FR 935, latest firmware and latest face version too

Developer Reply
16 July 2018, mbell-SVK

There is no such bug. Enabling/disabling signature has nothing to do with the minute marks. Try to uninstall and install back the watch face. Sometimes it can happen that your device uses settings file from a previous code version.

11 July 2018 | Version 6.81

Great watch face. Can you add a symbols near values?

05 July 2018 | Version 6.80

Best face ever! Thanks, donate..

Developer Reply
16 July 2018, mbell-SVK

Thanks! ;)

25 June 2018 | Version 6.80

How i can change the metric system of altitude from ft to meters?

Developer Reply
25 June 2018, mbell-SVK

You have to change it in your watch settings: Settings/System/Units/Elevation(Meters).

22 June 2018 | Version 6.80

Had to write a second review since I cannot update my original. The response from the developer cleared up the crash issue I was having when I configured the watch face on my vivo active3. This is now my favorite watch face with all the data and aesthetics I want in one place.

Matt Becker
20 June 2018 | Version 6.70

So good! all the geeky data I want and still looking great! thanks!

Rien van Broekhoven
10 June 2018 | Version 6.60

very nice watch face! But I can't get the customization done on my Fenix 5. My watch only lets me choose the watch face, but does not show a possibility in the menu to change field s and/or colors... How?

Developer Reply
10 June 2018, mbell-SVK

Thanks! ;) For the customization you have to use either Garmin Connect or Garmin Express apps, exactly the same way as for the other CIQ watch faces. E.g. in Garmin Connect go to: Menu-Garmin Devices-(your connected watch)-Activities & App Management-Watch Faces-HandsFive-Settings (and there you have a lot of options to play with). Your watch has to be connected to the phone via BT and your phone has to be connected to the internet.

10 June 2018 | Version 6.60

I am using vivoactive 3 and this watch face is so good. However I have no idea what is showed in the lower sub-face. It will be better if I can edit each sub-face but not only the upper one. I do suggest making the second hand always-show.

30 May 2018 | Version 6.60

Very nice and clean wf with lots of data and customization. Works perfectly on my Fenix 5S. Thank you very much for your great work!

30 May 2018 | Version 6.60

This watch face has all the functionality that I am looking for. However, when you customize the watch face in settings it crashes the watch face and it disappears from the selection menu. I am using a Vivoactive 3 so it may work fine on other devices

Developer Reply
30 May 2018, mbell-SVK

That is related to some firmware issues on Vivoactive 3 only and just when history charts are selected, although there is no such a problem when testing it in software simulator (for Vivoactive 3). If you keep history charts off in settings, you can use all other functionality without any problems.

Jan Ove
23 May 2018 | Version 6.50

I live in northern Norway and the midnight sun period is just some weeks away. This watch face worked fine intil just resent when sunset and sunrise is just after midnight (summertime in Norway and midnight is actually 0100 am, and both Sunset and sunrise is after 00 am). Now the watchface will not show once the gps signal is updated. I suspect this is an error related to the special situation handling the northern most altitudes during the summer season. Othewise a very Nice face. I hope this bug can be fixed. Jan Ove

Developer Reply
25 May 2018, mbell-SVK

Thanks for your feedback! The problem with sunrise/sunset calculation for polar areas during the midnight sun period have been already fixed in new version 6.60.

15 May 2018 | Version 6.50

Lots of informations. Great setting. Many datas not updated live (F 5x).

Sorry, no statistics available yet.