App Icon

TrainingPeaks Daily Workout

Description

Start building your workouts with 30 Days Free Premium or choose a Free Kickstart Training Plan and give the IQ App a test ride now. https://www.trainingpeaks.com/garmin</p><p></p><p>There is nothing more satisfying than a workout that has been performed to perfection. With the TrainingPeaks Connect IQ app, you can complete your daily structured workouts right on your compatible Garmin device. ...

What’s New

v1.0.3 - Added Support for the fēnix® Chronos</p><p></p><p>For support issues, please contact our Customer Success Team at:</p><p>https://help.trainingpeaks.com/hc/en-us/requests/new</p><p></p><p>PLEASE NOTE THAT THE FOLLOWING FIRMWARE, OR HIGHER, IS REQUIRED FOR THIS APP</p><p>Edge 520 – v11.10</p><p>Edge 820 – v6.30</p><p>Edge 1000 – v12.10</p><p>Forerunner 735XT – v7.20 </p><p>Forerunner 935...

Requirements

Companion App

Download on the App Store Android App on Google Play

Additional Information

Permissions

This app requires access to:

  • Send/receive information to/from the Internet
  • Saved information such as courses, routes, waypoints, tracks or workouts
  • Edge® 1000 Edge® 1000
  • Edge® 520 Edge® 520
  • Edge® 820 Edge® 820
  • Edge® Explore 1000 Edge® Explore 1000
  • Edge® Explore 820 Edge® Explore 820
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 935 Forerunner® 935
  • fēnix® 5 fēnix® 5
  • fēnix® 5S fēnix® 5S
  • fēnix® 5X fēnix® 5X
  • fēnix® Chronos fēnix® Chronos
Average Rating: (72 Ratings)

glauberlima
20 June 2017 | Version 1.0.2-u

Works great with my edge 520. Thanks a lot. If possible change it to works with 920xt too. :-)

eazyd247
16 June 2017 | Version 1.0.2-u

First time I used it on a 520 I hated it but that was until I figured out how to pause laps (since autostop is disabled by it). Works a treat and helps to target training zones very well. I'd give it 5 stars if Trainingpeaks could add an additional pointer that tracks average or NP power so that you know whether your average is in the prescribed zone.

migualo
14 June 2017 | Version 1.0.2-u

I have a forerunner 735xt on version 8.20. My accounts are synced. I have 244kb free in the memory. I have re-installed the app. Still when I go to the app in the watch I get the message 'Please connect your phone and open your Connect mobile open'. App is open and syncing, still I get zero workouts. Please help!

Oddlad
10 June 2017 | Version 1.0.2-u

Love it on my Edge 520 - beeping when out of power zone is a little irritating but it does force you to try and be consistent with your pedalling!

JohnLFeeney
08 June 2017 | Version 1.0.2-u

Works every time. I use it for my structured workouts.

kooki3monst4r
06 June 2017 | Version 1.0.2-u

It seems like a lot of people, myself included, are having trouble getting this app to work right with their Garmin wearables. If you contact training peaks, they'll tell you the solution and it's super simple. Your workout has to be a "structured" workout. The plan I bought basically had the duration filled in, but put all of the workout into the notes section. You have to click the workout and the click build workout and use the workout builder. Then it'll work with your watch.

Sanderblabla
01 June 2017 | Version 1.0.2-u

Worked straight our of the box on my 935!

jasleeduck
31 May 2017 | Version 1.0.2-u

Worked out of box with my 820 no issues very smooth app. was looking at moving to today's plan but now TP have produced this i am having a big rethink it brilliantly simple and good on a training ride too :-)

m.goldman
26 May 2017 | Version 1.0.2-u

When are you going to push an update for the Garmin Chronos? This was promised when the 935 was launched with the TP app already loaded. We were told it only required a "firmware update". Garmin pushed a firmware update months ago, yet TP has not updated this app to work with the most expensive and highest end Garmin in the line. Please provide an update!

m.goldman
26 May 2017 | Version 1.0.2-u

When are you going to push an update for the Garmin Chronos? This was promised when the 935 was launched with the TP app already loaded. We were told it only required a "firmware update". Garmin pushed a firmware update months ago, yet TP has not updated this app to work with the most expensive and highest end Garmin in the line. Please provide an update!

JimmyjamesNorth
23 May 2017 | Version 1.0.2-u

Works great, just need to know how to use it

lmb941
22 May 2017 | Version 1.0.2-u

No workouts found on my Garmin 735xt

dtaylor526
20 May 2017 | Version 1.0.2-u

TO ANYONE GETTING THE "NO WORKOUTS FOUND" MESSAGE - The below is from an e-mail from Training Peaks customer service. In short - swim workouts won't work, and for run workouts you MUST use something other than RPE (and TP doesn't currently offer pace settings). ------------------------------------------------ Taking a closer look at your account, there is only a Swim and Run Structured Workouts planned for today. Currently, the Garmin Structured Swim Workout protocol is proprietary information to them and they haven't provided the necessary information for us to allow for these workouts to be synced with the IQ app. However, our developers are always working to improve the TrainingPeaks platform and we're hopeful to be able to add that feature soon. The Run Structured Workout for today is based on RPE, which isn't able to be synced via the Structured Workout Export. Moving forward, if you can plan your workouts as Structured Workouts via the Workout Builder, the IQ App will sync the planned Structured Workout for each given day to your Garmin device.

TBeastLife
20 May 2017 | Version 1.0.2-u

Great concept - long way to go. I was very excited to use this feature ... at first. Now 2 months in, I'm over it. I'm tired of the "No Workouts Found" screen every other morning. I've used workout builder, cleaned up free space, changed the workout type to the only two my Fenix 5s recognizes (bike and run, even though today is really a brick) ... and still get the screen of death. May as well stick to Garmin Connect and call it a day.

Timujin
18 May 2017 | Version 1.0.2-u

Totally bad app... started to control my smart trainer.. i thought it was just information.. i dont need my trainer controlled like erg mode...

Keith-P
17 May 2017 | Version 1.0.2-u

Does not work on 935 xt. Says no workouts found. Lots of people have this error and the developer reply is UNHELPFUL. FIX THIS.

Developer Reply
17 May 2017, TrainingPeaksIQ

Please contact our Customer Success Team here, they can help get you up an running. https://help.trainingpeaks.com/hc/en-us/requests/new

LiaNickel
16 May 2017 | Version 1.0.2-u

This app came pre-loaded on my Garmin 935. It has not worked despite following all steps. Garmin Customer Service could not help me and I find them to be pretty amazing most times. I have a ticket in to Training Peaks to see if they can trouble shoot it. In the meantime, I cannot see my workouts on my 935. The message displayed is "No Workouts Found." I sure hope I don't get the stock message about freeing up space, because it's a new watch and I completed removed everything that I did on my Garmin 910xt.

Developer Reply
17 May 2017, TrainingPeaksIQ

Please contact our Customer Success Team here, they can help get you up an running. https://help.trainingpeaks.com/hc/en-us/requests/new

FetteRobbe
13 May 2017 | Version 1.0.2-u

No Workouts found on EDGE1000 and 735XT (and yes, it has got enough space available - complete new watch w/o a single workout on it).

Developer Reply
17 May 2017, TrainingPeaksIQ

Please contact our Customer Success Team here, they can help get you up an running. https://help.trainingpeaks.com/hc/en-us/requests/new

Iamea99
03 May 2017 | Version 1.0.2-u

+: would be great timer saver when working -: doesnt work on 735xt (no workouts found)

Developer Reply
06 May 2017, TrainingPeaksIQ

It appears that the 735XT requires more free disk space than other devices to process the downloaded workout files. Most workout files are less that 1 KB in size, so it is uncertain why the extra disk space is needed. We recommend freeing up disk space by deleting older activity files. Make sure those files have sync'd to Garmin Connect and TrainingPeaks first. If you are still experiencing issues, please contact our Customer Success Team at: https://help.trainingpeaks.com/hc/en-us/requests/new

michaelkatzkrefeld
02 May 2017 | Version 1.0.2-u

does not work PERIOD!

Developer Reply
06 May 2017, TrainingPeaksIQ

Please contact our Customer Success Team here, they can help get you up an running. https://help.trainingpeaks.com/hc/en-us/requests/new

mingkosun
28 April 2017 | Version 1.0.2-u

Great app, syncs perfectly with my edge 520. Never loose track of wich training i'm supposed to do, just plan in Trainingpeaks. You have to update your trainingplan when there's a change in threshold, would be great if the app adjusted this automatically.

gkami
27 April 2017 | Version 1.0.2-u

Not working on 735 xt (7.20) no workouts found, please find the bug and fix , that seems to be affecting large group of 735 users

Developer Reply
06 May 2017, TrainingPeaksIQ

It appears that the 735XT requires more free disk space than other devices to process the downloaded workout files. Most workout files are less that 1 KB in size, so it is uncertain why the extra disk space is needed. We recommend freeing up disk space by deleting older activity files. Make sure those files have sync'd to Garmin Connect and TrainingPeaks first. If you are still experiencing issues, please contact our Customer Success Team at: https://help.trainingpeaks.com/hc/en-us/requests/new

Panzaz
26 April 2017 | Version 1.0.2-u

Was not able to sync with my Edge 520 every time I tried it said "No Workouts Found" crappy app.

Developer Reply
06 May 2017, TrainingPeaksIQ

Please contact our Customer Success Team here, they can help get you up an running. https://help.trainingpeaks.com/hc/en-us/requests/new

Markus_M_BY
26 April 2017 | Version 1.0.2-u

Anwendung installiert, mit Garmin Konto und TP Account verknüpft, Workouts erstellt. Fenix5 Bluetooth an und mit Handy gekoppelt, Garmin Connect App aktiv. In der Uhr die App TrainingPeaks angewählt, nach Downloading geht die App wieder zum Startbildschirm zurück und es tut sich nicht mehr. Kann also kein Workout über TP ausüben. Schade.

Developer Reply
06 May 2017, TrainingPeaksIQ

Please contact our Customer Success Team here, they can help get you up an running. https://help.trainingpeaks.com/hc/en-us/requests/new

Markus_M_BY
26 April 2017 | Version 1.0.2-u

Anwendung installiert, mit Garmin Konto und TP Account verknüpft, Workouts erstellt. Fenix5 Bluetooth an und mit Handy gekoppelt, Garmin Connect App aktiv. In der Uhr die App TrainingPeaks angewählt, nach Downloading geht die App wieder zum Startbildschirm zurück und es tut sich nicht mehr. Kann also kein Workout übet TP ausüben. Schade.

Sorry, no statistics available yet.