July 11, 2019 | Version May 2, 2019
Great app. Seems however to have a problem with the display with the Forerunner 945. Numbers in the fields are somewhat outside of the screen.
May 28, 2019 | Version May 2, 2019
Great app, all information present. Would it be possible to add some kind of alert so it's easier to work in a certain zone, or at a preset power? Just like the PowerRace app, for example.
March 31, 2019 | Version June 26, 2018
My stryd foodpod works great. But my stryd pioneer doesn't shou power data? (cadans and hrm works)
February 5, 2019 | Version June 26, 2018
When i use this running app on my fenix 3 i always get every 5 miles a autolap. iam not amused about this. is there an option to deactivate this?
February 1, 2019 | Version June 26, 2018
Zone 4 and zone 5 colors are too similar. Change them. Also, having current time would be nice.
November 20, 2018 | Version June 26, 2018
DOES NOT WORK WITH VIVOACTIVE 3 MUSIC. It is designed for square screen
November 17, 2018 | Version June 26, 2018
As stated by others, it would be a much better app if HR was added and the ability to show what sensors are connected other than just the Stryd.
October 9, 2018 | Version June 26, 2018
Working great on Fenix 5 Plus!
It would be great to customise app field, for instance to add HR.
It doesn’t be showed during the run, the avg at the end of the training is 0 but luckily it’s correctly recorded.
However it’s pretty useful to check HR while running in order to understand the physical status.
It would be also useful to see if external heart rate monitor has been connected.
However, the Stryd app it was the reason when switching from Suunto Spartan to Apple Watch.
Of course the AW it couldn’t be enough for playing sports, so I’m really happy to find the Stryd app also for my new Fenix 5 Plus.
Please, add field customisation! :-)
趙元 Yuan Chao
September 3, 2018 | Version June 26, 2018
Works normal on my VAHR. But mapping "enter" to touch screen is really a bad idea. Please change to use hardware buttons. Thank you!
June 29, 2018 | Version June 26, 2018
There are two apps: Stryd IQ (widget) and Stryd Power (data field), but I could not find documentation about their difference. Stryd's Getting Started online steps said to install Stryd Power, but does not mention this Stryd IQ widget...
December 10, 2017 | Version October 3, 2017-2
It would be great to have an Efficiency Index and Normalized Running Power
October 4, 2017 | Version October 3, 2017-2
It would be great if there's an option to create workouts or sync the training plan on PowerCenter.
September 25, 2017 | Version July 19, 2017
Works great on the 920XT. Only request I have is the ability to display a zone instead of wattage output. If I'm conducting a workout and want to run in Zone 2, it would be great to see that I'm in zone 2 per my preset run power zones.
July 22, 2017 | Version July 19, 2017
The apps is ok, with lot of screens including the stryd power metrics.
However the pace and average pace is not ok.
June 24, 2017 | Version March 31, 2017
Useful and well designed app, however watch does not vibrate when set to autolap as it would using the normal garmin run functionality (FR 235). Also if feasible it would be useful to be able to select the source of pace and distance data, i.e. should be able to select pod as distance source as internal watch GPS is inaccurate in the FR 235 (stryd is one of the most accurate distance monitors, would be useful to be able to utilise this functionality). I have been using the watch in indoor mode to force it to use the pod for distance however that has its limitations as elevation data is not recorded or the GPS track. (note that there is a setting on the FR 235 to use a footpod for instantaneous pace, however lap, average pace and distance comes from the GPS and on the FR 235 you can't force these metrics to come from the pod unless you put the watch in indoor mode). Also as others have raised above it would be usefull to be able to customise the data fields if feasible. Note this isn't a big issue as the app developers have been quite logical with the selection of metrics and there isn't much i'd personally change. For example in some instances when working on form it might be useful to display cadance with power and pace low cadence is often linked to poor efficiency.
June 19, 2017 | Version March 31, 2017
I have used the app with my Garmin 735XT. When a strava segment warning showed on screen the app freezed and the activity closed. It was very annoying. A 10 Km run was splitted into 3 activities. There is also a lack of basic customization (1Km laps for instance). I am not happy at all. I will give it a another try outside the app, using run mode.
May 17, 2017 | Version March 31, 2017
The application is fine but it would be great to be able to change the screen fields or at least add the cumulative ascent, data field essential for trailrunning. Dynamic sensor metrics can only be viewed in this application. It would be nice to be able to use them as data added as it does with the iQ stryd simple power field application. It is not possible to access settings while using the application, for example to turn the light to automatic mode near the sunset if the watch is in manual light
April 24, 2017 | Version March 31, 2017
Great to have power whilst running, but would love ability to customise data screens within Stryd IQ app, e.g. one screen with 3s power and average lap power.
May 5, 2017, StrydTeam
Thank you for the suggestion. We will look to bring more customizable options to the Stryd IQ app.
If anyone is looking for a customizable option, please find the 'Stryd Power' data field on the app store. The 'Stryd Power' data field lets you place a power field directly in the run mode on your watch.
Angus & the Stryd Team
April 11, 2017 | Version March 31, 2017
Working great with the 920xt.
December 25, 2016 | Version December Update
In the right direction: Need more customization and more live metrics to be top notch. (FR735 and F3)
December 25, 2016 | Version December Update
waiting desperately for heart rate and auto lap
customization of data fields would be a plus
overall, quite poor utilization of the hardware (foot pod)
December 7, 2016 | Version November Update
The pace is way off and fluctuates a lot. It's very temperamental and uninstalled it self from my 235. It is a step forward though I'll give them that.
December 6, 2016 | Version November Update
very disappointing.The watch (Garmin 920 ) finds the stryd sensor (Power and Heartrate) but in 8 out of 10 runs the power and the heartrate isn´t displayed. Second big minus is the battery. have to change the battery 2 times a month. Maybe it becomes better but at this stage, it is useless.
November 18, 2016 | Version LaunchImprove4
auf der Fenix 3 wird kein Garmin Brustgurt erkannt bzw. keine Herzfrequenzdaten angezeigt. Bitte nachbessern.
October 5, 2016 | Version SeptemberV4
On Fenix3 - convoluted running sensor install, poor YouTube help, shows power on watch, still trying to get power into Garmin Connect. They are trying very hard to fix, it's just time consuming for me. I'd rather just install and run (a lot.)