App Icon

vPower

Περιγραφή

The vPower data field app has been developed for those who are not fortunate enough to own an expensive power meter. Firstly, this is not 100% accurate. As you can imagine, there is a lot of variables at play to calculate power on the pedals accurately. This is my best attempt to take all these variables into consideration and developed the app with the following key features:</p><p></p><p>Version History</p>

Νέα χαρακτηριστικά

Improve power calculations (trying to base on actual power meter results). Added Feedback Omnium Over-Drive trainer support.

Πρόσθετες πληροφορίες

Δικαιώματα

Για αυτήν την εφαρμογή απαιτείται πρόσβαση σε:

  • Καταγραφή τυχόν επιπρόσθετων στοιχείων στα αρχεία δραστηριότητας
  • Το προσωπικό σας προφίλ φυσικής κατάστασης του Garmin Connect™
  • Approach® S60 Approach® S60
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • Edge® 1000 Edge® 1000
  • Edge® 1030 Edge® 1030
  • Edge® 1030, Bontrager Edge® 1030, Bontrager
  • Edge® 130 Edge® 130
  • Edge® 520 Edge® 520
  • Edge® 520 Plus Edge® 520 Plus
  • Edge® 820 Edge® 820
  • Edge® Explore Edge® Explore
  • Edge® Explore 1000 Edge® Explore 1000
  • Edge® Explore 820 Edge® Explore 820
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • Forerunner® 230 Forerunner® 230
  • Forerunner® 235 Forerunner® 235
  • Forerunner® 630 Forerunner® 630
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 920XT Forerunner® 920XT
  • Forerunner® 935 Forerunner® 935
  • fēnix® 3 fēnix® 3, quatix® 3, tactix® Bravo
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
  • GPSMAP® 66s / 66st GPSMAP® 66s / 66st
  • Oregon® 7 Series Oregon® 7 Series
  • Rino® 7 Series Rino® 7 Series
  • vívoactive® vívoactive®
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Mercedes-Benz® Collection vívoactive® 3 Mercedes-Benz® Collection
  • vívoactive® 3 Music vívoactive® 3 Music
  • vívoactive® HR vívoactive® HR
Μέση βαθμολογία: (66 βαθμολογίες)

Paolo Carletto
7 Μαΐου 2019 | Έκδοση 1.9.1

Nice app: it let’s me know instantly about my power and stores them in the Garmin Connect that I can analyze later!! It may be not perfect but it solves all my necessities!! Good job!!

Johan Bakkers
14 Απριλίου 2019 | Έκδοση 1.9.1

I had a lot of expectations, but it looks as if the (default) settings are incorrect. I have peaks of more than 1900W and a average of almost 400W. My FTP is not even 200W, so this is far from realistic. Is there something with the (default) settings that needs to be adjusted to get more realistic values? Because I still hope it will work, I will rate it as "OK", but for now it does not work.

piero gsp
9 Απριλίου 2019 | Έκδοση 1.9.1

Great app..So..only a question...it's necessary imposted FTP value on device ?(Garmin Edge 520).. Thank you

Carlos Lemus
29 Ιανουαρίου 2019 | Έκδοση 1.9-upd3

Great app. i want to know if there is a chance to get the 20m value too.

xuxumatu
23 Οκτωβρίου 2018 | Έκδοση 1.9-upd3

Best estimated power, is there a way to print on garmin connect best 20 min power??

Bernard Coumelongue
13 Οκτωβρίου 2018 | Έκδοση 1.9-upd3

resultats correct jusqu a la derniere mise a jour. depuis en montée resultats tres bas et proche de zero. que se passe t il?

Jose Moreno 🇪🇸🇮🇨
8 Οκτωβρίου 2018 | Έκδοση 1.9-upd3

This application is useless.

Felix Fromm
26 Αυγούστου 2018 | Έκδοση 1.9-upd3

I thought at least this will be a good "live" estimate, especially going uphill but there must be some serious problems with the maths involved (or how data is provided by garmin). I would have liked the numbers displayed but strumbling around with 300 W on a recovery ride, pretty unrealistic... I have a feeling that aerodynamic drag/rolling resistance is massively overestimated in standard configuration, e.g. going a bit downhill with no preassure on the pedals generated watt numbers around 250 W To summarize: Better display hm/h and the gradient on your garmin to give you a feeling on how hard you are pressing the pedals, or get a powermeter...

xuxumatu
22 Αυγούστου 2018 | Έκδοση 1.9-upd3

there ara some strange peaks on descents https://connect.garmin.com/modern/activity/2925174226

Claudio Stefanini
11 Ιουλίου 2018 | Έκδοση 1.9-upd3

app doesn't work on climb or anytime that the gradient change...on climb goes to zero on descent calculate too much watt...works better till some months ago...but now unuseful

Jorge
7 Μαΐου 2018 | Έκδοση 1.9-upd

Warning MTB fans, this app is based on speed, so for guys like me, is not useful, I had a power of 280 watts descending and 15 watts in a steep climbing. No make sense for MTB. Is clear that the programmer did an excellent job for other kind of bikes,Road, Triathlon etc.

Bernard Coumelongue
5 Μαΐου 2018 | Έκδοση 1.9-upd

pas de resultats coherents sur fenix 3hr ,meme au dessus de 40 TOURS MINUTES RESTE A 0

redwoods5
17 Απριλίου 2018 | Έκδοση 1.9-upd

I use this with a fixed gear bike and Garmin 520. It seems like the app doesn't recognize the grade of hills: going uphill (low cadence, slower speed) I get pretty low power estimates. Going downhill (sometimes 140+ cadence and 30+ mph) vPower is 450w+. That's the opposite of the power meter readings on my other bike. The app seems pretty accurate on flats and low grades. Any thoughts?

GJFN 🇭🇳
13 Απριλίου 2018 | Έκδοση 1.9

Thanks for a great app, great service from developer. Data very accurate. Thanks.!!

Elfil Force
1 Απριλίου 2018 | Έκδοση 1.8.3

Works just perfekt. Very nice app. Thanks!

Jan E
28 Μαρτίου 2018 | Έκδοση 1.8.3

Works perfect. Gives a really good watt estimate on the ride, and all data is available in Garmin Connect afterwards. Great work :-)

xuxumatu
25 Μαρτίου 2018 | Έκδοση 1.8.3

Now with the peaks corrected is the best of the bes iq app for estimated power thanks a lot you save me a powermeter!!

Stephan Jacobs
23 Μαρτίου 2018 | Έκδοση 1.8.2

I used to be quite happy with the data shown. But the new release with the “no cadence“ option does not make any sense at all. Is there a possibility to use the app without this nonsense?

Απάντηση προγραμματιστή
24 Μαρτίου 2018, Shane_Coetser

Sorry for that Stephan. The calculation should however work correctly if a cadence sensor is connected.

Alan Inns
2 Μαρτίου 2018 | Έκδοση Version 1.8.1

Great for what it is, downloaded 5 different virtual power data field apps for my Fenix 3 hr, and tested against my Garmin power meter, and this was by far the most accurate and stable. I just wish the data shown, could be uploaded to Connect with the rest of the ride data, is that even possible????

Απάντηση προγραμματιστή
20 Μαρτίου 2018, Shane_Coetser

There has been a few issues, but looks like data is now uploading to GC.

Jaime Martín Granda
13 Φεβρουαρίου 2018 | Έκδοση 1.80-upd1

You also could match the values that calculate with BPM... With BPM you have another way to calculale Power. Maybe both inaccurate ways to calculate virtual power would be better tan one :) And decide if do an average or a weighted average towards one or another depending of the moment (Changes of bpms, altitude, cadence or so...) As powercal, with a little TEST with a real power sensor at home (in the trainer) you could calibrate or ask for results to get BPM/power rates and so... Then when going outside with any bike without power sensor, trying to estimate it better... In example for me at this moment, at constant efforts aprox: 167W - 115bpm 228W - 140bpm 274W - 159bpm 319W - 177bpm 365W - 185bpm

Henrik Kliebhan
31 Ιανουαρίου 2018 | Έκδοση 1.80

A few weeks ago. VPower only collect peaks of data while cycling. I replace the sensor but nothing happend. All other sensor on different bikes show the same result. What has happend ??

Απάντηση προγραμματιστή
20 Μαρτίου 2018, Shane_Coetser

This should now be fixed.

the_hard_law
21 Ιανουαρίου 2018 | Έκδοση 1.80

Is ok in the flat route. During the climb it don't work beacuse don't read the % of slope and set wrong power ( normally from 10 to 70 watt max) . To calcolate the power the reading of the slope is necessary. I hope to use it with the next upgrade .

Απάντηση προγραμματιστή
20 Μαρτίου 2018, Shane_Coetser

Slope is included in calculation, although it depends on the device accuracy also. I hope latest version shows better results.

Itay Rousso
27 Δεκεμβρίου 2017 | Έκδοση 1.80

Hi, I wonder if other have experienced it, but since the last update I am getting very low values - avg of 25W with a max of 65W... Before the last update it was all working properly - the only difference is that I changed the average value to 10 seconds, I changed it back to 3 in the middle of the ride but it had no effect... Before this update it was working really nice.. any idea? Itay

Iñigo
9 Δεκεμβρίου 2017 | Έκδοση 1.80

It doesn't work on my edge 1030. I obtain amazing high power values descending, while power is close to 0 climbing. It seems that calculation is not taking into account my weight and/or bike's, although they are correctly set in my profile (me) and in the data field configuration (bike)

ManuKuota
28 Νοεμβρίου 2017 | Έκδοση 1.80

awesome, I use it since the day one, always improving.. the only problem, the beginning of the ride is very often a peak about 1000 watt or more, so the power graph on the website becomes less visible.. sometime I press the start button while moving on a flat road not pushing on pedals and it helps, but not always..

Απάντηση προγραμματιστή
29 Νοεμβρίου 2017, Shane_Coetser

Do you want to send me the fit file so that I can see what parameters are causing the spike please?

  • 1 από 3

Λυπούμαστε, δεν υπάρχουν διαθέσιμα στατιστικά στοιχεία ακόμα.