Widget shows current temperature in Celsuis, Fahrengeit, Kelvin degrees. Press START button or tap the screen to change units. Large font used.</p><p></p><p>It reads at first the internal sensor data. Sensor is affected by the body heat so value is the average between your body tempearture and environment. If you need to know environmental tempearature, take off the device of your wrist. Wait for 10 minutes until device will have the environment temperature. For some devices you need to have Tempe external sensor connected to the watch (i.e. Forerunner 245, Gpsmap 66/86).</p>
2.2.9 - Ui fix and workarounds, speed improvements.</p><p>2.2.7 - SDK 4.1.4, new devices added</p><p>2.2.6 - SDK 4.1.1, new devices added</p><p>2.2.5 - new devices added, fenix 7 series, epix (Gen 2)</p><p>2.2.3 - SDK 4.0.7, correction for Oregon 7xx, Montana 7xx messaging system: tempe sensor required</p><p>2.1.2 - correct supported devices list</p><p>2.1.1 - SDK 4.0.3, new devices added</p><p>1.9.9 - Removed completely Edge Explore again. Added special message string for the devices without internal temperature sensor.</p>
Για αυτήν την εφαρμογή απαιτείται πρόσβαση σε:
Yannick
30 Ιανουαρίου 2023 |
Έκδοση 2.2.9
Bei mir auf der Uhr werden 30,0°C angezeigt. Draußen sind es aber nur 6°C. Wie geht das? (Garmin Venu)
MIGUEL JUAREZ
17 Ιανουαρίου 2023 |
Έκδοση 2.2.9
Pueden mejorar esta aplicación tomando encuenta que el color de la piel puede interferir en la lectura del sensor. Uso un Fenix7 y la temperatura es de 28°C y debería ser de 36°C si tuviera la selección de color de piel podría compensar esa diferencia de lectura.
Απάντηση προγραμματιστή
17 Ιανουαρίου 2023,
Navicom
La compensación de temperatura en forma de valores añadidos u otros cambios de lectura nunca se implementará en este widget, ya que es una forma rápida y sucia de corregir las lecturas del sensor. Gracias por su apreciación. El widget funciona como está previsto y como funciona el sensor de hardware.
Shatkovskyy
28 Δεκεμβρίου 2022 |
Έκδοση 2.2.9
My external Tempre connects to 245 correctly. But it shows random values, sometimes even -308°C. What is the problem?
Απάντηση προγραμματιστή
28 Δεκεμβρίου 2022,
Navicom
Problem is on Garmin site. Please contact Garmin support and explain the situation. They must conact FQC team and then submit ticket about this issue. Then SW developers should review the code and fix the error. Only after that you will see normal values. We just show you the values firmware provides us via SDK. Regards!
Phild
9 Νοεμβρίου 2022 |
Έκδοση 2.2.9
The temperature is higher when I wear the watch, Epix (Gen 2)
Απάντηση προγραμματιστή
9 Νοεμβρίου 2022,
Navicom
Works as described: It reads at first the internal sensor data. Sensor is affected by the body heat so value is the average between your body tempearture and environment. If you need to know environmental tempearature, take off the device of your wrist. Wait for 10 minutes until device will have the environment temperature.
Peter Huang
3 Νοεμβρίου 2022 |
Έκδοση 2.2.9
Holly Brown
7 Σεπτεμβρίου 2022 |
Έκδοση 2.2.9
Acceptably pointless The app seems to work perfectly well, that is telling the average temperature between me and my environment. But what does that even mean? I’d rather know one or the other
Απάντηση προγραμματιστή
7 Σεπτεμβρίου 2022,
Navicom
Ask Garmin (!not us, as 3rd party software developers!), why do they invented such sensor and provided such data via SDK. All that stuff stated in description, please read about it. Temperature measurements can be used in different ways. If you do not know the way, then you don't need it. Thousands of people like it and use it. Thanks for review!
Pierre
1 Σεπτεμβρίου 2022 |
Έκδοση 2.2.9
Pierre9731 Fonctionne très bien sur Fénix5 , j'ai comparé avec un thermomètre.
Bele
18 Αυγούστου 2022 |
Έκδοση 2.2.9
Roman Frohner
28 Ιουλίου 2022 |
Έκδοση 2.2.9
Funktioniert hervorragend, genau das 2as ich gesucht habe. Vielen Dank für die tolle App!
Virginie
20 Ιουλίου 2022 |
Έκδοση 2.2.9
Température erronée de 8 degré. Utilisée depuis 3 jours.
Απάντηση προγραμματιστή
20 Ιουλίου 2022,
Navicom
Works as described: It reads at first the internal sensor data. Sensor is affected by the body heat so value is the average between your body tempearture and environment. If you need to know environmental tempearature, take off the device of your wrist. Wait for 10 minutes until device will have the environment temperature.
Daniel Scherm
17 Ιουνίου 2022 |
Έκδοση 2.2.6
Venu sq - no temp sensor. It is in the compatible list of this app?!?
Απάντηση προγραμματιστή
17 Ιουνίου 2022,
Navicom
Venu SQ has no internal sensor, however can connect to tempe external sensor. https://www8.garmin.com/manuals/webhelp/GUID-1C3C7630-B695-44C3-AF56-949C1D4889FB/EN-US/GUID-0EB5A0A2-CED1-4F55-B48E-D1ED053B80DD.html Better than nothing. Hardware limitation is on Garmin side, say your opinion to garmin.com/ideas/ We are just SW developers, have no idea why Garmin did not select on cheap device the full set of hardware sensors. Cheers!
rob hale
13 Ιουνίου 2022 |
Έκδοση 2.2.6
Garmin venu 2. Tells the temp with no issues, nice and simple.
Miguel Martin Gascon
2 Ιουνίου 2022 |
Έκδοση 2.2.6
It worked in my fenix 7s, but since a couples of days ago I can not display de temperature once I push the start/stop button as always. Also I can not go into the configuration menu¿?. Thks.
Дмитрий
5 Μαΐου 2022 |
Έκδοση 2.2.6
Отличное приложение. На Вену 2 работает хорошо. Показания снимаются со встроенного датчика часов, соответственно это показатель температуры кожи. Все ок.
Duky5
1 Φεβρουαρίου 2022 |
Έκδοση 2.2.5
Martin Schmidt
3 Ιανουαρίου 2022 |
Έκδοση 2.2.3
Venue Sq : I need a Tempe sensor ? Why does it say compatible if I need an add-on ???
Tosatto Maurizio
1 Ιανουαρίου 2022 |
Έκδοση 2.2.3
Compatibile con Oregon 730T? Dopo averlo scaricato non si vede niente...
Απάντηση προγραμματιστή
1 Ιανουαρίου 2022,
Navicom
You must have Tempe external sensor connected to your device to see temperature readings. Garmin limits to read internal sensor in your device, so it is not readable. Consider to contact Garmin if you have any concerns, propositions or improvements. It is Garmin design, not us.
Juan Pablo
1 Δεκεμβρίου 2021 |
Έκδοση 2.1.2
No mide bien la termperatura. Datos erróneos.
Απάντηση προγραμματιστή
1 Δεκεμβρίου 2021,
Navicom
Please read the description. App shows temperature from internal sensor. Body heat + environmental temperature = average tempetature. It is Garmin design, if you have any propositions and improvements please contact them via garmin.com/ideas. Not us. We just show you the readings from the sensor your device has. Thanks for 1 star. Very motivating. Have a wonderful day!
Adrian
16 Νοεμβρίου 2021 |
Έκδοση 2.1.2
Red Dragg
12 Οκτωβρίου 2021 |
Έκδοση 2.1.2
Taylor
20 Σεπτεμβρίου 2021 |
Έκδοση 2.1.2
Very simple widget, but it works with Vivoactive 4, where I wasn't able to display temperature otherwise.
Darko
6 Σεπτεμβρίου 2021 |
Έκδοση 2.1.2
Excellent for seeing a current temperature in decimal value! Thank you!
Torijano
24 Αυγούστου 2021 |
Έκδοση 2.1.2
No corresponde a la temperatura real, mucha diferencia
Απάντηση προγραμματιστή
24 Αυγούστου 2021,
Navicom
Please read the description. App shows temperature from internal sensor. Body heat + environmental temperature = average tempetature. It is Garmin design, if you have any propositions and improvements please contact them via garmin.com/ideas. Not us. We just show you the readings from the sensor your device has. Thanks for 1 star. Very motivating. Have a great day!
Adam Župka
22 Αυγούστου 2021 |
Έκδοση 2.1.2
Vívoactive 4, not working "NOT SUPPORTED, INVALID SENSOR DATA"
Απάντηση προγραμματιστή
23 Αυγούστου 2021,
Navicom
We suspect it appeared after you updated software, right? Please contact support.garmin.com and replace your device. Garmin started the game to disable features from the devices in released firmware. May be the Edge Explore Story raises again. Sad but true.