A simple widget to display the newest reading from the internal temperature sensor (not available on all devices!), as well as connecting to a Tempe sensor and display it's reading at the same time!</p><p>C or F is based on the "Temperature Units" set on your watch under Settings-System-Units.</p><p>A Tempe Sensor is needed to see the Tempe data</p><p>If you like the app, and want to buy me a cold drink, you can do so by way of https://www.paypal.me/jimm58</p>
0.21.2 - added glance support for fenix 6 devices</p><p>0.18 - added support for Oregon, Rino, and GPSMAP 66
Για αυτήν την εφαρμογή απαιτείται πρόσβαση σε:
Carajean Murphy
1 Ιανουαρίου 2021 | Έκδοση 0.24.1
Doesn’t seem to be working in venu sq, downloaded pretty quick which is good, but all it seems to say is connecting.
danilo mariani
9 Δεκεμβρίου 2020 | Έκδοση 0.24.1
Stefan 2506
3 Σεπτεμβρίου 2020 | Έκδοση 0.23
This should be a standard feature, the fact that the internal sensor was just gone once connected a Tempe really bugged me! Great work! I am just not sure how this will effect battery life but will see...
Oswaldo Chaves Hoyos
17 Αυγούστου 2020 | Έκδοση 0.23
Buena tarde, tengo un Fenix 6x Pro y me sale Tempe None Paired. No veo cómo pueda configurar esto y saber mi temperatura corporal. Tampoco cómo escoger Fahrenheit o Centígrados, gracias y estaré pendiente.
Απάντηση προγραμματιστή
18 Αυγούστου 2020, jim_m_58
The Tempe is an external sensor, and if you don't have one or it's not paired, this is what you'll see. The internal temperature is the temperature sensor inside the watch. It's internal to the watch, and not body temperature as it's impacted by the ambient air. On the watch, to to settings-system-units and set temperature units to either C or F
john_tseng_garmin
7 Ιουλίου 2020 | Έκδοση 0.23
Approach S62 shows "None Paired" ? S62 is on the support list.
Regin Swenning
24 Ιουνίου 2020 | Έκδοση 0.23
fenix3 HR - I only get temperature from the Tempe-sensor, no Internal reading showing on the screen. (Temps v. 0.23)
Michael Irmer
11 Ιουνίου 2020 | Έκδοση 0.22
Internal temperature is not available on Forerunner 245. Can you implement an option to disable the internal temperature? Tempe works fine.
Richard Vowles
27 Μαΐου 2020 | Έκδοση 0.22
I have a Tactix Delta and it works fine apart from the fact it won’t vibrate when receiving the Tempe reading as it did on the tactix Charlie.
Giantmtbiker01
15 Μαΐου 2020 | Έκδοση 0.22
Great app showing the info needed. Given experience with similar temperature widgets and in particular connectivity, this one is perfect. Excellent work thank you.
Geneviève
11 Μαΐου 2020 | Έκδοση 0.22
I have a question: is the temperature reading for my skin, or for the ambient air (or water, when I'm swimming)? I have a Forerunner 735XT. Thank you.
Jose Manuel
9 Απριλίου 2020 | Έκδοση 0.22
Andre Robin
31 Μαρτίου 2020 | Έκδοση 0.22
Karl Mortar
17 Ιανουαρίου 2020 | Έκδοση 0.21.7
does low and high show data from tempe when it is connected or from internal sensor? native garmin widget can do that.
Miguel
21 Δεκεμβρίου 2019 | Έκδοση 0.21.6
This app works as expected and way faster than the original temperature widget. Low-high for tempe is missing, and it would certainly get 5* if a plot could both graphs internal+tempe. Good job!
Απάντηση προγραμματιστή
22 Δεκεμβρίου 2019, jim_m_58
In CIQ, the 24h high/low for the tempe isn't available, and to do direct ANT to get it, it would conflict with other apps that use it as a native sensor. As far as graphing the tempe, there are a couple issues, in that it would require a background process, which can run at most 30 seconds at a time, where it can take a minute or so for the tempe to connect. Even without that, it would have an impact on the battery - connecting to the sensor on a regular basis.
Joe Kelly
17 Ιουλίου 2019 | Έκδοση 0.20.1
So it works very well... but I have a few questions and issues with it (I have a Forerunner 945) : Issue: when I have a Tempe in range, and hit this widget, the battery life of the watch goes to crap. *even when I go away from the widget* I've noticed when backpacking when I have a Tempe and go to bed, my battery life is fine. But if I check the widget once , then the battery will drain the rest of the night. its like it keeps polling the Tempe. I've tested a few things to see if they were causing the drain (Inreach ANT+ connection, BT to phone, etc...) and determined the Tempe was the cause. Q: the temperature plot it shows displays the internal temp, but wont show the Tempe temp... since it seems like it stays connected to the Tempe... it seems like it would generate a plot, but I dont see anything.
Yarik
9 Μαΐου 2019 | Έκδοση 0.20.1
Очень полезное приложение для тех, у кого есть garmin tempe. Работает отлично на garmin fenix 5X plus.
Dušan Jurkovič
12 Δεκεμβρίου 2018 | Έκδοση 0.18
Nešla by kromě grafu nejnižší a nejvyšší teploty interního teploměru zobrazit i min. a max. teplota senzoru tempe, např. za poslední týden, měsíc, rok?
Christopher Lawley
4 Δεκεμβρίου 2018 | Έκδοση 0.18
Regarding the TEMPE device - The watch only connects when MEASURING AN ACTIVITY so the app will not show anything. || What to say? it shows the watch's temperature (approx yours) as well as that from the Tempe device (if you have one) Recommended
Emanuel Chiculita
28 Νοεμβρίου 2018 | Έκδοση 0.18
Works perfectly on Fenix 5 with Tempe, a real working variant to the crappy garmin temp widget! Thank you!
Λυπούμαστε, δεν υπάρχουν διαθέσιμα στατιστικά στοιχεία ακόμα.