SKS AIRSPY

Christian Hildebrand
14. Juni 2022 | Version 1.0.0

Hatte immer wieder bissel Connect Probleme am Garmin. Das hat sich mit dem Wechsel der Batterien erledigt. Toll fand ich, dass SKS mir neue Batterie Deckel zugeschickt hat.... Vielen Dank! Der neue SKS Alarm am Garmin Display ist auch super.

ratzec
11. Juni 2022 | Version 1.0.0

Leider keine stabile Funktion mit Garmin Edge 1030 plus - ständige Verbindungsabbrüche und Ausfälle, obwohl in der App alles korrekt angezeigt wird. Schade, leider so immer noch nicht nutzbar.

Daniele Volo
12. Mai 2022 | Version 0.3.24

The app works but it too simple, as other written before, an allert system should be implemented. maybe with a colored code like in the android app. really too simple, hope in future updates.

fast.n.speed
24. Februar 2022 | Version 0.3.23

update - das firmware update ist nicht sehr intuitiv, aber mit etwas probieren dann doch gelungen danach beide untis in garmin datenfeld angezeigt hoffentlich bleibt das auch während einer mtb-tour auch so

Ronald Lau
12. Januar 2022 | Version 0.3.23

In order to desplay readings on Garmin devices, you need to put the Airspy 5 digits serial numbers in The Settings Bike 1 front, Bike 1 rear,...., Bike 3 rear. The Settings are not for your dream tyres psi reading XD

Fernando Martínez Díaz
29. Dezember 2021 | Version 0.3.23

He adquirido recientemente los sensores airspy y, aunque se conectan con la app del teléfono móvil (y se desconectan continuamente), en el garmin 830 no muestra más que la presión 0.00 en ambas ruedas siempre. En la app del móvil están continuamente desconectándose, lo que es irritante, pues continuamente te sale el aviso de presión baja y tardan unos segundos en conectarse otra vez. En el campo de datos de connect iq he metido los números de los sensores en bici 1 y solo muestra como presión 0.00. Sinceramente, estoy muy decepcionado con el producto.

Alfonso Mayol
9. Oktober 2021 | Version 0.3.23

Funcionan bien, algún problema al conectarlos al Garmin 1030 Plus, ya subsanado. Lo que no consigo es actualizar el firmware a la versión V1.0.1 ya disponible. ¿Alguién lo ha conseguido? ¿En caso afirmativo, cómo lo ha hecho?

Arnaud Pladys
30. August 2021 | Version 0.3.21

Damn! Was working fine. Now it flash between « b1 », « ist » and « - » , loose the pressure every 5-10s, and only one of the two sensor display a pressure! What is going on.. I tried to re-install the app, no succes. Basically unusable now. Damn this look like product with no support.

schlupp73
24. August 2021 | Version 0.3.21

Please add a pressure Alert feature, e.g. using "https://developer.garmin.com/connect-iq/api-docs/Toybox/WatchUi/DataField.html#showAlert-instance_function" or standard Audio prompts. Warning values could be set using Garmin Connect.

gotosun77
17. August 2021 | Version 0.3.21

@SKS In regards of low pressure Alarm 》》》 It seems I am not the only one who is expecting this as a basic function of a pressure Monitor system. I just installed my system and needed to find out that this function is NOT available via my Garmin (only via the app on phone) It was mentioned in other comments here as well, that this function is wanted, but I could not see any feedback from SKS here. Please inlighten us when and / or if this function will come. Thank you

asamolov
29. Juli 2021 | Version 0.3.21

Hello SKS! I deleted my bad rating, everything worked as it should on all Garmin devices! My mistake was that I entered only one sensor number in the SKS AIRSPY data Field! IT IS NECESSARY TO ENTER THE NUMBERS OF BOTH SENSORS! Everything works on devices: Fenix 6x pro solar, Edge 1030, Oregon 750t I will conduct tests on two bicycles, a mountain bike and a fat bike. I will write my impressions later!

Ahmad
18. Juli 2021 | Version 0.3.21

Works flawlessly!

Markus Vitz
12. Juni 2021 | Version 0.3.15

Das Problem mit der Version 0.3.15 ist immer noch, dass nach einer gewissen Zeit immer nur ein Wert eines Sensors angezeigt wird, und sich dann auch abwechselt. Muss dann immer den Edge während der Aktivität neu starten

Gerry Vece
1. Juni 2021 | Version 0.3.0

Great that you can now have up to 4 units. Since the last update, the font size has become too big to show on a single field (on the 530 and it's screen) and the digits are too far left and too far right to the screen edge. Please correct it. As mentioned previously, the pressure data does not always display on the field. Sometimes the front, sometimes the rear and sometimes both. This needs to be sorted out. Since owning for over a year now, the issue of not refreshing still exists. So if you like me, move the wheels and then switch on the Garmin ( or Garmin is already on) and then do nothing for 10 mins, the next time you get on your bike, the pressures on the field don't change. You have to pretty much switch off the Garmin off and on/ start new ride. To avoid this scenario, You have to have started your ride before the sensors stop transmitting (10 mins I think), or switch the Garmin off and back on again when you are ready to ride. All of this has been fed back to the developers, hopefully the interface with Garmin will improve. Regarding the low pressure warning... There is a workaround. You can have the phone app running in the background and if the pressure drops the message is sent from the phone to the Garmin as a message. There may be a delay, but if you have a very slow puncture, this may be helpful but again it's not an ideal solution. I've suggested have a digit colour change when the pressures change, so it's more visible on screen

Martin
31. Mai 2021 | Version 0.3.0

The device looked nice and working on phone. Very disappointed because not working on my garmin Edge 1030 as well on my second garmin 1000 not working. I dont know where is problem but look like app not working correctly on garmin. There is problem with this application not with garmin. Garmin connect and garmin express see this application. You see the pressure as element in garmin but shows only 0.0 (on my booth garmin) A lot of my friends want to buy this but when listen about problem with garmin there is not way. I sent email to SKS but the answer was nearly like here. Its curious how many people (customer) have problem with garmin showing live pressure but look like SKS don't doing nothing with this problem.

Dario Armellin
29. Mai 2021 | Version 0.3.0

It's ok, basic working really miss loss alarms

Janet
28. Mai 2021 | Version 0.3.0

Grossartig!!! Endlich Sicherheit über den aktuellen Luftdruck. Ich möchte nie mehr drauf verzichten. Danke

Markus Vitz
18. Mai 2021 | Version 0.3.0

Lief seit 3/4 Jahr ohne Probleme. Seit dem Update zeigt der bei einem Sensor immer nur 0,00 an und das wechselt immer zwischen vorne und hinten. Dass heißt, es wird immer nur von einem Sensor der Wert angezeigt. Verwendet wird ein Edge 830.

Dario Armellin
17. Mai 2021 | Version 0.3.0

Works well, but lacks the alarm functuon for air loss, also the pressure data is not recorded during the activity, only shown real-time

Miky
10. Mai 2021 | Version 0.2.3

Salve,ho acquistato una coppia di sensori x mtb e funziona perfettamente col garmin . HO acquistato in seguito una seconda coppia x mtb trail,ma come faccio ad inserire e memorizzare altro codice di identificazione ,in modo da far riconoscere al garmin le 2 coppie di sensori ? Con app funzionano ok

Jesse VOZA
18. April 2021 | Version 0.2.3

Device complicated to install (deflates tyre - leaks - Lockring tight "enough") Long app download on phone. Handwrite serial #. Why ? Firmware update not starting even with unit disconnected. Garmin shows ERR3. What is that ? Pressure on Garmin frozen or real ? Why airspy not on GARMIN ANT+ sensor screen ? Like a powermeter or HR sensor ? Product NOT READY.

Gregory Medvedev
15. April 2021 | Version 0.2.3

I have 2 air spy for 2 bikes. How can i connect for 2 bikes with 1 garmin?

Panagiotis Skordilis
27. März 2021 | Version 0.2.3

Excellent devices. I bought a pair for my road bike. The only problem is with Garmin fenix or Garmin edge the app is not having an option for alert on specific psi which make the device useless for most of the time.

Jean Francois DONNAY
18. März 2021 | Version 0.2.3

Characters really too small on edge 1030, no charts

Sean Carson
8. Februar 2021 | Version 0.2.3

I just received my SKS Airspy SV in the mail today. I love the quality packaging and easy install. Instructions were very simple to follow. Don't be alarms when the air evacuates from the value after screwing on their adaptor. It will stop once you slide the unit in place. I double checked the reads from the app with my digital gauge and they are accurate. Getting the units connected to the MySKS App was easy, although I wouldn't say the same for my Garmin Edge 530. Instructions on how would have been nice to see in the box. Hopefully they add the ability for multiple sensors on Garmin soon.