App Icon

Bontrager Light Control


Bontrager Light Control data field gives you the ability to directly control the modes of any connected Bontrager RT series lights. Once the lights are paired with the Edge computer, the data field will display a graphical battery status, and buttons to quickly change the mode of the connected headlights and taillights.</p><p></p><p>To Setup:</p><p> 1. Download and install the data field to your Edge computer</p>


1.2.1 - CIQ SDK version 2.4.8.</p><p>1.2.0 - CIQ SDK version 2.4.0</p><p>1.1.1 - Edge 1030 support. CIQ SDK version 2.3.4.</p><p>1.0.8 - Updated build using the new CIQ SDK version 2.2.6</p><p>1.0.7 - Updated build using the new CIQ SDK version 2.2.5</p><p>1.0.6 - Fixed potential crash in the settings screen</p><p>1.0.5 - Updated build using the new CIQ SDK version 2.2.4</p><p>1.0.4 - Fixed an issue with the version number not updating when updating to a new version.</p>

Weitere Informationen


Diese App muss auf Folgendes zugreifen:

  • Daten über ANT an Sensoren von Drittanbietern senden und von diesen empfangen
  • Edge® 1000 Edge® 1000
  • Edge® 1030 Edge® 1030
  • Edge® 1030, Bontrager Edge® 1030, Bontrager
  • Edge® 820 Edge® 820
  • Edge® Explore 1000 Edge® Explore 1000
  • Edge® Explore 820 Edge® Explore 820
Durchschnittliche Bewertung: (48 Bewertungen)

Peter van Wijk
3. Oktober 2017 | Version 1.0.8

Werkte erg goed op mijn Edge 1000. Helaas niet compatibele met de Edge 1030!!!

Ignacio Ramirez Gonzalez
28. September 2017 | Version 1.0.8

Don't work with my new Edge 1030¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡

Sam Golden
26. September 2017 | Version 1.0.8

You should be able to configure the auto mode, first off there is no documentation as to what auto mode even does. Secondly maybe I don't want my headlight in low or high mode and I want it in a flash mode depending on day or night. It would be great if you could set things like above X speed I want the mode to be HIGH LIGHTS, if I am below x speed set to day or night flash etc... people are going to want different settings here, ultimately I should be able to configure different profiles based on what I am doing too. If you don't want to provide such configuration let at least document what "auto" mode does for the headlight and tail light as I have both and I can't tell what it is trying to do. Lots of potential here, GIVE SOME UPDATES!

Antwort des Entwicklers
5. Oktober 2017, TrekBicycles

Auto is controlled by the Edge light network mode. Your options in the Edge setup are: Auto - Ambient light controlled for day and night settings HiVis - Puts the lights in flashing modes Individual - The Edge does not automatically set the modes. Your ideas are good, I would advise passing them along to Garmin. They control what the network modes do on the Edge.

13. September 2017 | Version 1.0.8

It works well with my Bontrager Flare RT. However, I feel as though it is really better suited to being a Widget, rather than a data field. Data Field screens are precious, and there's no reason to have to scroll through this app when I rarely have to use it. I'd rather swipe down on my Edge 1000, swipe right or left and have the light controls available there.

Gabriel Wehle (el Gabo)
9. September 2017 | Version 1.0.8

no work Edge 1030

Alberto Montes
13. Juni 2017 | Version 1.0.8

I have 4 buttons. First is 'IND' which makes nothing for me. Then I can configure 2nd and 3rd buttons and the 4th is fixed to OFF. So for example I can program 'Day Flash' and 'Night Flash' (which is great) but...why cant program the other 2 buttons? As the light has 5 modes (Day-DayFlash-Night-NightFlash-OFF) would be great to have 5 instead 4 buttons or at least be able to configure 'IND' as well.

Antwort des Entwicklers
21. Juni 2017, TrekBicycles

Hello, Thank you for your review. I want to clear up the operation for you. The light control is intended to work with the automatic system on the Edge. The 'IND' says that your light network is set to Individual Mode. In this mode, the light control will only allow you to switch between the two programmed buttons and Off. If you switch your light network to be either AUTO or Hi-Vis, then you have the ability to use the two middle buttons as 'over-rides' to the system. To change the light network, go to the sensor menu for lights, and change network mode.

Adam Pirillo
9. Juni 2017 | Version 1.0.8

This app works fine and the interface is simple, but it is annoying that you can not easily switch between ALL the modes the light has available. You have to go into the menu and switch things. For example I'd like to be able to go from high medium low and flash but you only get two options and than you have to go into the settings to change the two options.

Pat Toher
15. Mai 2017 | Version 1.0.7

The user interface seems quite nice but does not function at all on my Edge 1000 (firmware 12.2). In addition to one Ion 800 headlight and two Flare RT taillights, I am also running Dura Ace Di2 9150 (newest groupset) with the EW-WU-111 D-Fly (also newest model D-Fly). The native Garmin light control works normally, albeit somewhat flakey and intermittent, but Bontrager's app continually displays "Forming Light Network" but it never does. It seems that third party apps and Garmin need more beta testing. -111 D-fly (also newest model D-Fly). The native Garmin light controls work normally, albeit somewhat flakey and intermittent, but Bontrager's app continually displays "Forming Light Network" but it never does. It seems that third party apps and Garmin need more beta testing.

Antwort des Entwicklers
21. Juni 2017, TrekBicycles

Thank you for taking the time to write a review. The 'forming light network' is actually coming from the Edge system itself, and the light control has to wait for that to finish before it can do anything. There have been a lot of updates in the last few months, so I would encourage you to try it again with the latest version of FW and build of the light control.

Kenneth Lenger
18. April 2017 | Version 1.0.7

The app itself seems OK, but it does not play well (or not at all) with other 3rd party apps. I've tried 3 different gear ratio apps and the Garmin Edge crashes with every combination of a 3rd party app + the Bontrager app. Trek/Bontrager: Any chance of fixing this?

Vicente Gomez
30. März 2017 | Version 1.0.5

Pienso como Franges. Dado que la mayoría de usuarios tenemos una sola luz, se podría configurar para que en el caso de solo detecte una, toda la pantalla este dedicada a ella, y así poner todos los modos para elegir

11. März 2017 | Version 1.0.5

muy buena !! estaria bien una app para el rada garmin varia!!

5. Februar 2017 | Version 1.0.4

Very cool app !

Phill Mai
1. Februar 2017 | Version 1.0.4

Set any data screen size to 1, then change the field to the app. It works perfectly!

21. Januar 2017 | Version 1.0.3

je voudrais savoir comment fonctionne le systeme decelaration automatique

21. Januar 2017 | Version 1.0.3

Esta bien, pero si solo tienes la luz delantera o la trasera, no debería aparecer en pantalla la que no tienes y así habría sitio para todas las configuraciones en pantalla

19. Januar 2017 | Version 1.0.3

great app for great lights!

Chris Swanson
4. Januar 2017 | Version 1.0.1

While there's not much wrong with a Transmitr remote, saving some grams by controlling lights from the Garmin is nice. Data field controls all Ion or RT together. For example I have 2 of each. Toggling option for Ion affects both front lights, same for RTs in the rear. One button and both front or rear lights switch modes. You can set which 2 pattern/brightness options you want available besides the unchangeable auto and off buttons. Battery status of each light is always on at top of display field. It takes up an entire screen, but the layout crams plenty of options and battery info without appearing too busy or cluttered and the separation between buttons is good.

29. Dezember 2016 | Version 1.0.0

Perfekt. So soll es sein!

Filipe Catarino
25. Dezember 2016 | Version 1.0.0

Para quem tem as luzes ion rt e flare rt este data field é Excelente!!! Funciona na perfeição

Leider sind noch keine Statistiken verfügbar.