App Icon

Run Power

Beschreibung

A single run field...with power. View power data with zones and alerts in Run mode, which is not natively supported by any Garmin device. Allows non-multisport watches to connect to a power meter, which they can't do natively.</p><p></p><p>Works with standard power meters, including Stryd. (Garmin Running Power not supported.) </p><p></p><p>Features:</p><p>• 6 fields with 100s of metrics, including lots of power-specific metrics (see below)</p>

Neues

SUPPORT NOTES: </p><p>• Before you leave a review: If you have a feature request or there is a problem with the app, please press Contact Developer (*) or post in the forum thread, so I can help you</p><p>• (*) I can't respond support requests without an email.</p><p>━━━━━━━</p><p>A clone of Run Power is available here: https://apps.garmin.com/en-US/apps/3df34884-0014-49a2-9194-97793de0d64d</p><p>━━━━━━━</p>

Weitere Informationen

Berechtigungen

Diese App muss auf Folgendes zugreifen:

  • Daten über ANT an Sensoren von Drittanbietern senden und von diesen empfangen
  • Aufzeichnung zusätzlicher Informationen in Aktivitätsdateien
  • Ihr Garmin Connect™-Fitnessprofil
  • Approach® S60 Approach® S60
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Descent™ Mk1 Descent™ Mk1
  • ForeAthlete® 230J ForeAthlete® 230J
  • ForeAthlete® 235J ForeAthlete® 235J
  • ForeAthlete® 630J ForeAthlete® 630J
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • ForeAthlete® 920XTJ ForeAthlete® 920XTJ
  • Forerunner® 230 Forerunner® 230
  • Forerunner® 235 Forerunner® 235
  • Forerunner® 245 Forerunner® 245
  • Forerunner® 245 Music Forerunner® 245 Music
  • Forerunner® 630 Forerunner® 630
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 920XT Forerunner® 920XT
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 3 fēnix® 3, quatix® 3, tactix® Bravo
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® Chronos fēnix® Chronos
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
  • vívoactive® vívoactive®
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Mercedes-Benz® Collection vívoactive® 3 Mercedes-Benz® Collection
  • vívoactive® 3 Music vívoactive® 3 Music
  • vívoactive® HR vívoactive® HR
Durchschnittliche Bewertung: (29 Bewertungen)

Wilfredo
6. Juni 2019 | Version 8.9

Con mi garmin 735 xt no me da ningun dato de potencia! Porque sería? Sólo me salen --- en cada parametro

Antwort des Entwicklers
6. Juni 2019, FlowState

Por favor, perdona a mi pobre español, ya que he usado Google Translate. Gracias por su interés en Run Power. Para 735XT, Run Power funciona con un medidor de potencia estándar como Stryd. Debe conectar su Stryd como un medidor de potencia, en la configuración del reloj. Si tiene más preguntas, presione "Contactar con el desarrollador".

George Bokas
2. Mai 2019 | Version 8.8.1

Thank you very much for the great app. Today I received my new forerunner 245 and I was wondering if you are planning to make available your app for the new garmin watches. I am looking forward to it.

Antwort des Entwicklers
2. Mai 2019, FlowState

Thanks! Run Power is now available for the FR245.

Franz Kelsch
2. Mai 2019 | Version 8.8.1

I have been using this app with my Garmin 935 and Stryd power meter. It works great. I have it set to use four data fields, 3 sec power, lap power, heart rate and distance. The power and heart rate fields are color coded, making it very easy for me to take a quick look while running. Just used on a half marathon and wish I had it when I ran the Boston Marathon last year.

Olu
16. April 2019 | Version 8.8.1

I haven't run with this App yet (just ran Boston yesterday) so will return after I've used this while training. This app is AMAZING! Set up is intuitive and the number of options is unreal. This is a must for any Stryd owner, but would be useful for any Garmin owner. Why Garmin (or Stryd) couldn't develop an app like this is beyond me. I will post another review after using it

Penny W
13. April 2019 | Version 8.8.1

A really well thought through app. Every time I think of a feature I wish it had, it turns out it already has it. Love the options for lots of different displays (good for runners like me who need big displays) and the chance to have power alerts. There are so many options to pick too - I like being able to limit the number of times you get an alert if you want so you don't get the annoying beep beep indefinitely when you have decided to run with a friend outside your alert range. Thanks for all the work in creating this and for being so quick to respond to questions

Martin Strachota
15. März 2019 | Version 8.8.1

A must-have for any Stryd owner! I love that I can see instantaneous power, lap average power and last lap average power together with time, distance and heart rate. I also very much appreciate that this field works with older watches, like my Fenix 3. Thank you!!!

Pavese
11. März 2019 | Version 8.8.1

Excellent data field, works like a charm, pretty much your only option to see a variety of power based metrics if you own a watch like the FR645 which does not natively support coupling a Stryd as a power meter. It is tricky to develop something like that, much more complex than most other data fields, so my hat is off. Very clean layout but under the hood a plethora of available options. Highly recommended.

Patrick Smit
28. Februar 2019 | Version 8.8.1

I think by itself it is a great app, but there is a bug in there, because on my watch (fenix5X+Ti) in combination with Stryd it gives dropouts of a second randomly but often. With other datafields i dont have this issue. From others I have heard they experienced the same problem so this needs to be solved. Than it will be a great app. Maybe not everyone is experiencing this and can imagine you will have a great time with the datafield. The developer is encouraged to contact me so I can provide the data if he has need for analysis.

Antwort des Entwicklers
28. Februar 2019, FlowState

Patrick, thanks for the feedback. Sorry to hear you are having issues with Run Power. As noted in the store description, I can’t contact you unless you press Contact Developer and leave your email, or if you use the forum thread. When you leave a review, I can’t contact you except by leaving a reply like this, which I can’t be sure you’ll ever see. I would also appreciate being contacted with this kind of issue before leaving a review — positive reviews are a large motivator for my continued support of this completely free datafield that I made in my spare time. Without knowing more, it’s hard for me to say whether this is a bug or a Garmin limitation. For example, if you use Run Power *without* entering the ANT+ ID of your Stryd (which means that you paired your Stryd natively with the watch), then any drop-outs would be on the Garmin side. Even if you do connect via ANT+ ID (which isn’t necessary), there’s no reason I can think of for drop-outs, unless the Garmin software/hardware is just unable to handle the load of two data fields making simultaneous ANT+ connections. As an example of Garmin limitations, I find that when I use navigation on my 935, sometimes the entire watch slows down, especially when I go off course — sometimes this even causes CIQ fields to crash. I wouldn’t mind hearing about which fields you used which do not have this issue, and exactly what they do. Finally, as I do not own a Stryd, I’m not able to test these scenarios directly, unfortunately. But if you contact as suggested above, I will certainly do my best to try to figure it out.

Gonzalo David Orozco Bernal
24. Februar 2019 | Version 8.8.1

Buenos días, no consigo ponerla a funcionar con mi 920xt y mi Stryd, lo tengo sincronizado como Footpod pero no me envía datos al reloj. Las IQ nativas de Stryd si funcionan perfectamente pero me gustaría poder visualizar al menos potencia 3s y potencia media de vuelta en la misma pantalla y a priori esta IQ lo permite. Alguien me podría ayudar?? Muchas gracias

Enrique Fernandez Mompean
23. Februar 2019 | Version 8.8.1

hola, no recoge los datos de potencia que manda al reloj la banda garmin, como la aplicacion garmin runing power??

Antwort des Entwicklers
23. Februar 2019, FlowState

Hola Enrique, la descripción de la aplicación dice que Garmin Running Power no es compatible. La banda de Garmin no envía energía al reloj, pero la aplicación Garmin Running Power calcula la energía mediante una fórmula secreta. Ninguna otra aplicación puede soportar el poder de Garmin por lo que sé.

Rahmat Matondang
18. Februar 2019 | Version 8.8.1

Works great!

Schuster
26. Januar 2019 | Version 8.6

Como se puede ver la gráfica potencia una vez subido el ejercicio

Antwort des Entwicklers
31. Januar 2019, FlowState

Gracias. Si tiene alguna sugerencia para mejorar la aplicación, presione Contact Developer.

Todd Krupa
24. Januar 2019 | Version 8.6

Anyone who runs with power absolutely needs this app! This is the perfect companion app to use with my Stryd.

Antwort des Entwicklers
31. Januar 2019, FlowState

Thanks!

George Kalogeris
11. Januar 2019 | Version 8.2.1

The only one that works with my 645M which can't connect to ANT+ Bike PowerMeters. Plz add %FTP at Power alerts (not only absolute numbers). Thanks a bunch. Where can I donate?

Antwort des Entwicklers
13. Januar 2019, FlowState

Hey George, thanks for the review and the suggestion! At this time I am not accepting donations, but I think Power Alerts by %FTP is a great idea. It will certainly be a possibility in my upcoming app, Run Power+. Run Power+ will remain free (as always), but it will require the use of a web app to change settings, which will open up a lot of possibilities for owners of all watches. More information here: https://forums.garmin.com/forum/developers/connect-iq/connect-iq-showcase/1441455-run-power-move-settings-to-web-app-for-more-features

Steve Bateman
11. Januar 2019 | Version 8.2.1

Fantastic! Not only does it show all the metric combinations I could think of, but it has color coding, support for structured workouts and the ability to define additional metrics which can be written to the FIT file (if the metric can be specified using AppBuilder formulae). All I can say is WOW!

Antwort des Entwicklers
11. Januar 2019, FlowState

Thanks! Glad you like it.

CriticalPower
7. Januar 2019 | Version 8.0

This data field is a game changer for those training with power. New real-time metrics such as %FTP allow to execute simple intervals with very little to memorize. The developer is extremely attentive to user feedback and quick at implementing changes and upgrades. Would be happy to donate if there was an option.

Antwort des Entwicklers
7. Januar 2019, FlowState

Thanks for the review! My goal is to make Garmin apps that are as useful as possible for as many people as possible.

cichykot
7. Januar 2019 | Version 8.0

This is amazing. Well done mate. Big thank you !!!!!!!!!

Antwort des Entwicklers
8. Januar 2019, FlowState

Thanks for the review! I received your support request, but unfortunately I could not reply as there was no return email address. Could you please send another request with your email, or contact me in the forums? Thank you.

Alex Tran
1. Januar 2019 | Version 7.0.4

This is an amazingly flexible data field that has seen significant updates in the short amount of time it's been available. The developer has been extremely responsive to feature requests and bug reports in the forums. Two metrics it has that I haven't seen any other field support are displaying power as a % of FTP and real-time running effectiveness value. I highly recommend anybody running with power install this data field.

Antwort des Entwicklers
7. Januar 2019, FlowState

Thanks for the review!

Stephen
31. Dezember 2018 | Version 6.9

Can confirm that this works nicely on a Vivoactive 3. This is a great app! and completely free, without any licenses, payments or anything. The developper has updated this app a number of times over the last few days after listening to the community. Much appreciated. I am still not sure if you still need to use the Stryd Power datafield, if you do NOT need the other running metrics. Thanks once again stefe

Antwort des Entwicklers
7. Januar 2019, FlowState

No worries. Hope it's useful.

Fabian
29. Dezember 2018 | Version 6.6

Genial gran trabajo,funciona genial y sigue sorprendiendo a todos los usuarios todos los días con mejoras que realmente lo son porque trabaja por y para nosotros en lo que vamos necesitando. Solo puedo dar las gracias por crear esta gran aplicación y gratuita. Muchísimas gracias

Antwort des Entwicklers
7. Januar 2019, FlowState

De nada.

wvernon
27. Dezember 2018 | Version 5.1.1

Power works well on 645m allowing more views than stryd field alone

Antwort des Entwicklers
28. Dezember 2018, FlowState

Thanks! Glad you like it.

Jose Maria Cortizo Vizcaino
21. Dezember 2018 | Version 3.1.1

To date this is now the best, most comprehensive and most flexible, data field for running power. The developer is very open to suggestions and fast to implement changes. Kudos.

Antwort des Entwicklers
21. Dezember 2018, FlowState

Thanks for the 2nd review haha!

Jeffrey Tsang
20. Dezember 2018 | Version 2.6.3

This is an Excellent app for Power based running. The app is great if you run with a Stryd foot pod and train with power. This maybe the only app now that allows you to set power alerts for structured training workouts. The developer is very responsive to questions and feature request. Great work on this app!

Antwort des Entwicklers
20. Dezember 2018, FlowState

Glad you like it! Thanks for the review.

Jose Maria Cortizo Vizcaino
19. Dezember 2018 | Version 2.3.1

Great app!!! Nonetheless, I suggest to add a couple of advanced power metrics such as Rolling Efficiency Index over 3, 5, 10, 20 & 30 seconds. I personally find useful 3 and 30 seconds. (https://www.bigdatatriathlon.com/efficiency-index-jim-vance-data-field-garmin-iq-watches/); and the ‘EF‘ (Efficiency Factor). This is the ratio of Watts I generated to HR (o or Pace to HR). Thanks anyway. The app is really cool.

Antwort des Entwicklers
19. Dezember 2018, FlowState

Thanks for the review Jose! I will look into REI and EF. FYI, all metrics are available over 3, 10 and 30 seconds (look in the second list for each data field)

Jules Holleboom
18. Dezember 2018 | Version 1.2.3

If I understood correctly, there's no need to add the Stryd Power datafield to one of the other screens, right? If so, how does it work? And how come other apps do require that? Does it affect the ability to analyze the data on the Stryd website itself?

Antwort des Entwicklers
18. Dezember 2018, FlowState

Thanks for the review, Jules. You need the Stryd data field to record power and all the other data that Stryd provides. Run Power and all the other apps that work with Stryd only have access to power, when the user connects to their Stryd as a generic power meter.

Leider sind noch keine Statistiken verfügbar.