App Icon

Four Fields

Beschreibung

Now with Open Weather Map data!</p><p>NOTE: to access weather data, it MUST be a watch running CIQ 2 or 3, so won't work on things like the forerunner 23x,630, the fenix 3 devices, and similar, such as the D2 Bravo</p><p>You need an APIkey to use the OWM data. Please see https://openweathermap.org/appid</p><p></p><p>To set your APIkey for the app, you use App Settings. Here's a basic "How to" for that: https://forums.garmin.com/developer/connect-iq/w/wiki/14/changing-your-app-settings-in-garmin-express-gcm-ciq-mobile-store</p>

Neues

0.21 - added Open Weather Map data, support for the va3 Music LTE (including an icon for when LTE is connected)</p><p>0.19 -added setting for leading zero in hours (disables AM/PM in 12hr mode)</p><p>0.17 - added icons for data fields. Set "ID used in DFs" to Icons if needed. Make sure the new version is installed or you won't see icons

Weitere Informationen

Berechtigungen

Diese App muss auf Folgendes zugreifen:

  • Ausführung im Hintergrund, wenn die App nicht aktiv ist (kann sich auf Akku-Laufzeit auswirken)
  • Senden/Empfangen von Daten an das bzw. vom Internet
  • GPS-Position
  • Verlauf für Herzfrequenz, Barometer, Temperatur und Höhe
  • Ihr Garmin Connect™-Fitnessprofil
  • Approach® S60 Approach® S60
  • Approach® S62 Approach® S62
  • Captain Marvel Captain Marvel
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Darth Vader™ Darth Vader™
  • Descent™ Mk1 Descent™ Mk1
  • First Avenger First Avenger
  • Forerunner® 245 Forerunner® 245
  • Forerunner® 245 Music Forerunner® 245 Music
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® 6 fēnix® 6
  • fēnix® 6 Pro fēnix® 6 Pro, fēnix® 6 Sapphire
  • fēnix® 6S fēnix® 6S
  • fēnix® 6S Pro fēnix® 6S Pro, fēnix® 6S Sapphire
  • fēnix® 6X Pro fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar, tactix® Delta Sapphire
  • fēnix® Chronos fēnix® Chronos
  • MARQ™ Adventurer MARQ™ Adventurer
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain
  • MARQ™ Commander MARQ™ Commander
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
  • Rey™ Rey™
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Mercedes-Benz® Collection vívoactive® 3 Mercedes-Benz® Collection
  • vívoactive® 3 Music vívoactive® 3 Music
  • vívoactive® 4 vívoactive® 4, GarminActive
  • vívoactive® 4S vívoactive® 4S, GarminActive S
  • vívolife vívolife
Durchschnittliche Bewertung: (32 Bewertungen)
Rezension schreiben

Gordon
13. Februar 2020 | Version 0.23.2

What's are the zz at top of WF?

Antwort des Entwicklers
14. Februar 2020, jim_m_58

That's if you are between your configured sleep and wake times.

Michal
12. Februar 2020 | Version 0.23.2

It is GREAT and very clear watch face! Any possibility to get dd-mm-yy date on info field? and then disable date below time to get it bigger?

Jack
25. September 2019 | Version 0.23.1

Very nice watch face. Simply enough information are shown. Very easy to configure. Thanks.

Mark Wade
22. August 2019 | Version 0.22.2

This is awesome, love it, perfect combination of Easy-to-Read customizable and not too much going on!

Papa Carlos
22. April 2019 | Version 0.22

Good

Mike Adderley
12. Februar 2019 | Version 0.21

OWM Widget works but when I use this watch face the temp and current conditions from the OWM do NOT work...

Antwort des Entwicklers
12. Februar 2019, jim_m_58

Yes, that's only available on watches that run CIQ 2 or 3. The CIQ 1 devices like the D2 Bravo doesn't support getting the weather with any CIQ watch face. I'll note that in the description.

Alan
12. Januar 2019 | Version 0.20

Very useful

David
8. Januar 2019 | Version 0.20

My favorite watchface!

Robyn Kane-Berman
23. Juli 2018 | Version 0.18-upd1

Great watch face - thank-you. How do I get the colours on the face as in the photo, please? I only have black, white and the step counter in purple,

Antwort des Entwicklers
23. Juli 2018, jim_m_58

This like many CIQ apps uses app settings for that - from your phone or with Garmin Express. Here's a basic "how to" for app settings: https://forums.garmin.com/forum/developers/connect-iq/connect-iq-showcase/115055-how-to-app-settings

David Giraldo
26. Juni 2018 | Version 0.18-upd1

Minimal yet efficient. I love it. EXACTLY what I was looking for. The other version just had too many data points to look at. One thing though, what the heck is that purple bar above the battery icon????

Antwort des Entwicklers
27. Juni 2018, jim_m_58

That's the move bar. The first segment displays when you haven't taken enough steps in an hour, and the 4 smaller ones, for each additional 15 minutes. With all 5, if you walk about 200 steps they'll all clear.

Jayakumar R 🇮🇳
6. Juni 2018 | Version 0.18

Very simple configuration interface... Good use of real estate. Love it! The only thing I am not sure of is the exclamation mark next to the Bluetooth icon. Is there a way to make it work or remove it in vivoactive 3?

NoelWahoo
14. Mai 2018 | Version 0.17

Great watch! Looks great with lots of DFs clearly presented. Thanks!

Ungvári Gergő
23. April 2018 | Version 0.17

Pretty awesome watch face! The only thing, that I really miss is the seconds indication. Sometimes it shows up, sometimes it goes away. I would really appreciate, if you could fix it and make it available at all times. Other than that, highly recommended!

Antwort des Entwicklers
23. April 2018, jim_m_58

Seconds are only displayed all the time on the newer watches, aand for example, on the Fenix3 and d2bravo, will only display for about 10 seconds after a gesture. It's a matter of the hardware itself, so nothing can be done in the code to change this.

sandra brunner
8. April 2018 | Version 0.17

i have 1 question.. if i set moonrise it shows Wan C. what does this mean? lovely regards sandra

Antwort des Entwicklers
8. April 2018, jim_m_58

That's moon phase and not moon rise. "Wan C" is Waning Crescent" "This intermediate Moon phase is the last phase of the lunar month. It starts just after the Third Quarter Moon and lasts until the following New Moon."

Cairn
13. März 2018 | Version 0.15.1-upd1

This is the best face, for me that I've tried (and I've tried all of them as of March 2018). One feature request would be to have the option of a character/graphic for some of the fields. E.g. a heart for pulse, little man walking for steps, etc.

Wilmar
9. März 2018 | Version 0.15.1-upd1

Great WF, clean and clear. Contains all I need.

Rick Mitchell
19. Januar 2018 | Version 0.15

Thanks for the 30 min option on time zones! Took this already awesome face to an even higher level.

Rick Mitchell
15. Januar 2018 | Version 0.14

Any chance to get a +30 min for the few time zones that are UTC +30?

Antwort des Entwicklers
16. Januar 2018, jim_m_58

I considered that, but wasn't sure which +30minte timezones made sense. In the future, I might do something like add a "plus 30" checkbox when a tz is picked. I'll put it on my list as something to look into.

arTee
6. Januar 2018 | Version 0.11.4

Could there be an option to disable seconds? Thanks! Otherwise great watch face!

Martin Hloben
27. Dezember 2017 | Version 0.11

Very nice watches. Could you please modify diacritical marks, european east, thursday "štrvrtok" shows strange marks at first letter š. Thanks a lot

Antwort des Entwicklers
28. Dezember 2017, jim_m_58

I'll be posting an update today or tomorrow where the font used for the data fields is also used for the date, so this should work for you at that time.

Gordon
26. Dezember 2017 | Version 0.11

Absolutely love this face.. Especially the new fonts.. Nice and clean and just shows me the data I want to see..also seems very low on battery.. Would it be possible to have the option to use the new font for the time and date and possibly have icons for steps and heart rate etc? VA3 user.

Antwort des Entwicklers
27. Dezember 2017, jim_m_58

I use custom fonts for the date and time to make it easier to adapt to different devices. (they are always a known size) For the data fields I was above to find a standard font that would work given the size of the data fields themselves. The design of this watch doesn't allow for icons in the data fields.

Allalin72
26. Dezember 2017 | Version 0.11

Thats it! Thank you!

Allalin72
25. Dezember 2017 | Version 0.10.6

Great! One datafield for the next sunevent would be great. Sunrise or sunset. Regarding to the event coming up next.

Antwort des Entwicklers
26. Dezember 2017, jim_m_58

I'll be doing an update this week that includes this option

V W
23. Dezember 2017 | Version 0.10.5

I like the previous version better. Because it was in various colors made it easier to read. This new version is in Black and White, even though the photo shows color display. On my Vivoactive 3, there is no way to customize or change it in any way.

Antwort des Entwicklers
23. Dezember 2017, jim_m_58

I think they might be doing something with the app store, as things work fine for me. Maybe just try again after a bit of time.

Allalin72
22. Dezember 2017 | Version 0.10.4

Perfect! Thanks! :)

Leider sind noch keine Statistiken verfügbar.