7. juli 2020 | Version 1.9.3
Mit einer Fenix 5 Plus kann man die Leistungsanzeige nicht nutzen. Die Leistung schwankt im Sekundentakt zwischen über 300 W und 80 W. Berg runter erzielt man ohne Trampeln über 800 W. Kann mir vorstellen dass Rohwerte von der Fenix genommen werden. Die nicht glatt gezogen und bereinigt wurden.
5. juli 2020 | Version 1.9.3
Does not work when i go up hill. it shows 1w or 0w. what can i do? Other way very good on flat roads. thank you
6. juli 2020, Shane.Coetser
Hi Martin, please send me a copy of your fit file so that I can troubleshoot the calculation.
1. juli 2020 | Version 1.9.3
ne prend pas en compte le % de dénivelé, dommage
Joshua Walker 711
30. juni 2020 | Version 1.9.3
This is awesome! Good by 1k power meters! I didn’t think I’d ever own a power meter, but now I have one FOR FREE! Thank you for developing such an awesome app
21. juni 2020 | Version 1.9.3
Thank you for doing this. It's nice to have some type of metric without spending more money on a sensor for my bike than the cost of my bike.
21. juni 2020 | Version 1.9.3
I think I might have found the floating point problem. Mine in Germany has "," as decimal separator (as is normal here) but it won't let me input a "," only numbers and "." are accepted and then the "." seems to be ignored. If I leave the original "," and just edit the numbers it seems to work. Haven't used it yet just edited bike weight so far but I thought I'd leave that comment here hoping it helps.
21. juni 2020, Shane.Coetser
Thanks mate. Yes I received feedback that localisation might be the problem. Will address in a new version.
19. juni 2020 | Version 1.9.3
Hello. I enter my tyre rolling resistance coefficient 0.006515 then i save and i synchronize but when i go back to settings the number has changed to 6515.000000. Is it normal? Thanks
15. juni 2020 | Version 1.9.3
I can't change to rolling resistance coefficient to decimal. I have uninstalled and reinstalled it but still doesn't work. I'm using a Huawei P20 lite but can't think that the phone is the problem.
13. juni 2020 | Version 1.9.3
Por el momento una sola salida y entrego los datos, nose si son correctos pero funciona
8. juni 2020 | Version 1.9.3
Je n’arrive pas à trouver le champ sur ma Fenix5X.
J’utilise déjà déjà deux camps de données. Est ce que c’est pour cette raison?
11. juni 2020, Shane.Coetser
Veuillez vous assurer que le champ de données est installé sur votre appareil. Il devrait apparaître sous la liste "Installé" dans les paramètres de l'appareil sur votre téléphone. Sur votre montre, ce sera sous les champs ConnectIQ.
29. maj 2020 | Version 1.9.3
I have an old Elite Super Crono Fluid, i've seletcted Qubo Fluid ad i have 9% lower vPower vs the official Elite My E-training App (ex. 112W vs 122W). But i like it!
20. maj 2020 | Version 1.9.3
I can't change the tire rolling resistence coefficient. The field expects a long while the value is a decimal. Entering numbers doesn't work, neither does copy/paste.
20. maj 2020, Shane.Coetser
I just re-installed the application to simulate your issue. After installation I was able to change the value in the settings page on my iOS device. Can you confirm that you have a proper install and what phone you are using?
3. maj 2020 | Version 1.9.3
Just downloaded this yesterday and went for a short indoor spin today. I don’t have a power meter but the spin class I go to does and I have a decent idea of the kind of numbers I’m cranking. I’d say this tracks nicely and is maybe within 10% accuracy.
Of course, trainer selection is crucial. I’m using rollers and selected the Peak Performance Omnium as the base and tweaked my bike weight upwards 50% from actual since my rollers have 1 more roller (3) vs the Omnium’s 2.
I’ll probably have more to say after a couple more months with this.
29. februar 2020 | Version 1.9.2
Tocino & velocidad..
12. november 2019 | Version 1.9.2
Very good data field. Can you please get the Elite Crono Fluid added? I have the following Speed and Virtual Power rating from Elite. Speed(KMH) Power 10,35 20,88 30,190 40,325 50,505
6. september 2019 | Version 1.9.2
I am getting very low power readings when going uphill (3-10%). I expect 150-180W based on Strava readings, but I am getting 10W or less. It looks like (bike+rider) weight (or grade) are being ignored altogether. I am using an Edge 520 plus (has barometer, not sure it uses it), and I have speed and cadence sensors.
Any ideas? Could it be that it does not work if I am using feet/miles/pounds instead of metric units?
11. juli 2019 | Version 1.9.1
great app, it would be perfect if the watt data from the app can generate an estimated IF or can be integrated in garmin connect like for who has a power meter. these data will complete the statistic graphs with a lot of useful data!
14. juni 2019 | Version 1.9.1
Hey Shane, keep up the good job! Excellent app you have developed!!! All the best, Mike
8. juni 2019 | Version 1.9.1
Sometimes data is erratic, and spiky a lot. I did'nt understand the reason, better the developer make a simpler version, calculating using the weight, speed, slope real-time.
7. maj 2019 | Version 1.9.1
Nice app: it let’s me know instantly about my power and stores them in the Garmin Connect that I can analyze later!! It may be not perfect but it solves all my necessities!! Good job!!
14. april 2019 | Version 1.9.1
I had a lot of expectations, but it looks as if the (default) settings are incorrect. I have peaks of more than 1900W and a average of almost 400W. My FTP is not even 200W, so this is far from realistic. Is there something with the (default) settings that needs to be adjusted to get more realistic values?
Because I still hope it will work, I will rate it as "OK", but for now it does not work.
9. april 2019 | Version 1.9.1
Great app..So..only a question...it's necessary imposted FTP value on device ?(Garmin Edge 520)..
29. januar 2019 | Version 1.9-upd3
Great app. i want to know if there is a chance to get the 20m value too.
23. oktober 2018 | Version 1.9-upd3
Best estimated power, is there a way to print on garmin connect best 20 min power??
13. oktober 2018 | Version 1.9-upd3
resultats correct jusqu a la derniere mise a jour. depuis en montée resultats tres bas et proche de zero. que se passe t il?