Name: New*Graphic Cycling Dashboard
Rating: 4.2 (39 reviews)
Author: QQstarSS

NOTES:
This is a DATA FIELD but not an app! So you MUST setup your layout with only 1 item, then select CIQ for the data field, and finally select this one.

And this Data Field is optimized for REAL-TIME data, so such as the AVG-Speed, total elevation gain, total calories, etc are considered unimportant values. If you really want to check those data, I highly recommend you setup your profile with multiple layouts, one layout with this one, another layout with all other fields that you want personally.

--------------
Functional Description:
1. Support colorful zone area for easier reading;
    - Two color schemas. Legacy: LightBlue/Blue/DarkBlue/Green/Yellow/Red/Purple; ZWIFT: Grey/Blue/Green/Yellow/Orange/Red/Purple.
2. Support more meaningful Slope display;
3. Support configure zones in an easy way (Just set LTHR or FTP) or configure zone detailed;
4. Support Balance/Torque Effectiveness/Pedal Smoothness;
5. Support DI2 gear information (Required CIQ 1.2.10 or newer);
6. Support Garmin Vector Phase graphic (ONLY IF your power meter provides Efficiency and Smoothness);
7. Support calculate NP. And will show NP and Average Power alternately.
8. Show Trend of Slope/Cadence if no HR AND Power; Show HR Trend if NO Power.
8. NEW! Support Wind direction and speed
9. Support auto-on/off backlight based on Sunrise/Sunset time (will set off the backlight off between half an hour after sunrise and half an hour before sunset). 
    You can set it via the configuration, with fully auto / auto on only / auto off only / disable. 
    There are two dots beside the battery indicator. 
    The left one is the GPS signal indicator. If it is: GREY - no GPS signal; GREEN - W/ GPS in Day time; BLUE - W/ GPS in Night time.
    The right one is the backlight on/off indicator. If it is not shown, means backlight is off. When show: YELLOW - will be off if reaching day time; RED - NOTICE will NOT be off even if reaching day time.

-

Configuration Description:
Pre-Steps:
1. Connect your power meter with your Edge Device, set layout as only 1 data field, then select data field with CIQ, then pick up this data field;
2. Measure your LTHR (Lactate Threshold Heart Rate) yourself;
3. Measure your FTP (Functional Threshold Power) yourself.

-

Configuration:
Use Connect Mobile App or Express software to configure parameters;

-

Color and Zone Description:
Generally, Green Color means Competition Zone. And you can continually output around 1 hour.
If drop down into Blue or similar color, means your output lower than expected. Lighter means lower.
If raise to Yellow Color, means you enter Anaerobic Boundary Zone. So you can only continually output around 10 to 20 minutes.
If raise to Purple or Red color, means your output extremely high. And you can only continually output around 1 to 5 minutes.

-

Speed Meter / HR / Power:
1 - Bright Blue - 0 to 20km / HR Recovery / Power Recovery
2 - Light Blue - 20 to 30km / HR Endurance / Power Endurance
3 - Blue - 30 to 35km / HR Tempo / Power tempo
4 - GREEN - 35 to 40km / HR 4 zone Sub Threshold / Power Threshold (CP 20 to 60)
5 - Yellow - 40 to 45km / HR 5a zone Over Threshold / Power VO2Max (CP 12 to 20)
6 - Purple - 45 to 50km / HR 5b zone Anaerobic / Power Anaerobic (CP 6 to 12)
7 - Red - Over 50km / HR 5c zone Sprint Max / Power Sprint Max (CP 1 to 6)

-

Cadence Meter:
Light Blue - 0 to 50
Blue - 50 to 80
GREEN - 80 to 110
Yellow - 110 to 130
Red - Over 130

-

Slope Meter:
Light Blue - Negative slope
Green - 0% to 5%
Yellow - 6% to 10%
Pink - 11% to 15%
Red - Over 15%

(Besides color, at the bottom of Slope Rectangle border, contains actual Slope Graphic to make it easier to read)

New*Graphic Cycling Dashboard

NOTES:
这是一个DATA FIELD而不是一个App！所以你必须设置你的layout布局，让它只包含一个栏位，然后选择CIQ，最后选择这个Data Field。

另外，这个Data Field着眼于实时数据的追踪，因此诸如平均速度、海拔总提升、卡路里总消耗等这类数值会被视为非重要数据。所以如果你希望查阅相关的数据，个人建议你配置你的显示为多个Layout布局，其中一个布局用来显示当前这个Data Field，然后另一个布局设置任何你想额外显示的数据。
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
功能说明：
1. 支持彩色化显示各个区间以提高数据可读性；
    - 有两套色彩设置。经典：浅蓝/蓝/深蓝/绿/黄/红/紫。ZWIFT：灰/蓝/绿/黄/橙/红/紫。
2. 支持图形化的坡度显示；
3. 支持简易配置区间（只设置LTHR和FTP）也支持精细设置各个区间；
4. 支持功率平衡/扭矩效率/踩踏平滑数值；
5. 支持DI2齿比数据（需要CIQ 1.2.10以后版本支持）；
6. 支持Garmin Vector功率计踩踏相位图形化数据（仅当功率计提供扭矩效益和踩踏平滑数值时）。
7. 支持计算NP，并且NP和平均功率会交替显示。
8. 没有心率和功率，显示坡度和踏频历史趋势。没有功率，显示心率历史趋势。
8. 新功能！显示事实风向和风速。
9. 支持依据日出/日落时间自动开启/关闭背光。（日出后半小时到日落前半小时会自动关闭背光） 
    也可自行设置。支持：自动开关/仅自动关/仅自动开/禁用
    在电池右边会显示两个小点来指示背光状态。 
    左边的为GPS信号指示。灰色 - 没有GPS信号；绿色 - 有GPS信号，是白天；蓝色 - 有GPS信号，是夜间。
    右边的为背光指示。如果没有显示，则背光关闭。如果显示，黄色 - 白天时会自动关闭；红色 - 即便到白天也不会自动关闭，需要自行注意。
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

配置说明：

前置步骤：
1. 用Edge设备连接功率计。设置骑行界面布局仅包含一个数据栏位，然后选择数据类型CIQ，之后选择这个数据栏位；
2. 自己测量你的LTHR（乳酸阈值心率 Lactate Threshold Heart Rate）；
3. 自己测量你的FTP（阈值功率 Functional Threshold Power）。

--------------------------------------------------------------------------

配置方法：
用Connect手机APP或者Express软件配置参数；

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

颜色和区间定义：

整体来说，绿色表示合适的竞技区域。你可以在此区域维持1小时持续输出。
如果降到显示蓝色或者近似颜色，意味着你的输出低于预期输出。越浅输出越低。
如果升到黄色，意味着你已经进入无氧区域。通常你只能在此区间持续输出10到20分钟。
如果升到红色，意味着你已经进入极高的区间。通常你只能在此区间持续输出1到5分钟。

--------------------------------------------------------------------------

速度 / 心率HR / 功率Power：
1 - 亮蓝 - 0 to 20km / HR 恢复 / Power 恢复
2 - 浅蓝 - 20 to 30km / HR 耐力 / Power 耐力
3 - 蓝 - 30 to 35km / HR 巡航 / Power 巡航
4 - 绿 - 35 to 40km / HR 4 zone 次阈值区 / Power 阈值区 (CP 20 to 60)
5 - 黄 - 40 to 45km / HR 5a zone 超阈值区 / Power VO2Max (CP 12 to 20)
6 - 紫 - 45 to 50km / HR 5b zone 无氧进攻区 / Power 无氧进攻区 (CP 6 to 12)
7 - 红 - 50km以上 / HR 5c zone 冲刺极值区 / Power 冲刺极值区 (CP 1 to 6)

--------------------------------------------------------------------------

踏频：
浅蓝 - 0 to 50
蓝 - 50 to 80
绿 - 80 to 110
黄 - 110 to 130
红 - 130以上

--------------------------------------------------------------------------

坡度：
浅蓝 - 下坡
绿 - 0% to 5%
黄 - 6% to 10%
粉 - 11% to 15%
红 - Over 15%

（除了颜色，在坡度边框下端，会绘制实际的坡度图形，以更容易辨识）