Robert E Basile
23. července 2021 | Verze 2.2.2
Works great on a Garmin 1030 plus. I have the data field set to only display approach speed. Thanks for making this available!
10. června 2021 | Verze 2.2.2
Wer ein Garmin Radar RTL 515 oder RTL 516 hat, hat deutlich mehr Auswertungen zur Verfügung. Man sieht wieviele Autos einen überholt haben und wie schnell diese absolut/relativ waren. Außerdem kann man auf der Fahrt sehen, wie schnell die Autos kommen/fahren. Danke!
1. května 2021 | Verze 2.2.1
Very nice app. Thank you for your hard work making this app!
1. května 2021 | Verze 2.2.1
Cool app. I’m sure the information can be useful to route planning apps like Komoot to provide cyclists information about how busy a route is, and how dangerous (based on approach speed of cars)
25. dubna 2021 | Verze 2.2.1
1. the page has an incorrect data import link. However, the import via the Import submenu always returns a message that there is no radar data in the data file - no matter what file format you import.
2. application overloads Edge 530 - without the application my 50 km route eats 10% battery. After installing the app, the battery consumption increased to 14-15%. That is 4 less routes on a single charge.
3 I reported a problem with the site, with importing data - no response. If you don't give a damn about your users, then you get such reviews - simple.
I didn't find any advantages of using this application - lack of possibility to import and display data on the website, excessive battery usage is a bit too high a price for having the number of cars that passed me - anyway, such information itself is useless.
26. dubna 2021, MyBikeRadarTraffic
Wow, it's amazing how somebody could write this for a completely free service being provided to the community. I am investigating the battery issue. Also, this is the first time I am hearing about the "incorrect data import link" and perhaps your increased battery usage is somehow related to your data files not showing radar data when imported. Please attach your .FIT file in a message to me. I use this on my Garmin 1030 with no noticeable decrease in battery life. Also, there is always going to be a trade-off between extra features on a device that consume CPU and battery life. What do you expect me to do about it?
29. března 2021 | Verze 2.2.1
Absolutely amazing app, a must-have if you are commuting, it really does work quite well. Can you make it work to display car speed when the bike is stopped at 0 Speed?
7. března 2021 | Verze 2.2.1
Great idea !, Thanks
Would it be possible to separate the monitored data into 3 independent fields in a future version?
I mean, Vehicle count in one field, realative velocity into another field and absolute velocity in a 3rd field ?
That way the users can display the fields in different screens, the fonts can be larger.
One more thing, can you measure the distance from the vehicles?
If so, can you change each circle that show on the screen representing a vehicle approaching the bike by the estimated distance to the bike ?
This would be great in Edge units with larger screeens, specially 1030 and 1030+.
27. února 2021 | Verze 2.2.1
Works perfectly and gives more information than standard system. I find it very helpful to see the speed of the vehicle approaching you from behind.
31. ledna 2021 | Verze 2.2.1
Well done to the developer - great idea, well executed, particularly since the speed fields added. For SportTracks (mobi) users, the data is available on their charts, and is excellent. Looked for a way to donate, will do that when one becomes available.
DONNAY Jean Francois
17. ledna 2021 | Verze 2.2.1
I've got number and speed on Garmin Connect but not on MyBikeTraffic.com
17. ledna 2021, MyBikeRadarTraffic
I recently updated the website to support drag/drop upload and managed to break the import feature without realizing it. So sorry about that, but I believe I have it fixed now. Please try to upload your ride again and let me know using the "contact developer" link if you are still having problems. Thanks, Brian Toone
6. ledna 2021 | Verze 2.2.1
Helpful to see data on traffic on segments for route planning.
22. října 2020 | Verze 2.2.1
Thanks for this addon it is a must having varia radar!
I have only issue with speed of cars. I'm using metric units and the speed (relative and absolute) looks significantly greater then I would estimate. I tried to check it under a street radar, but it doesn't show the speed in the data field when you stop. It looks the speed in km/h is about 1.5-1.6x higher then reality, but I have no chance to verify it. It could be a unit mix-up km .vs. mile...
16. října 2020 | Verze 2.2.1
Brilliant addition to my Edge+Varia setup!
15. srpna 2020 | Verze 2.1.0
Very good data field. The font is too small when selecting two data. And with four, it's completely a miniature. I am asking for a larger font
17. srpna 2020, MyBikeRadarTraffic
Thanks for the feedback. I agree that the font is too small, but the problem I've run into is if you ride on busy roads with hundreds of cars, the numbers from each field run into each other with a larger font. I'm working on an update that will dynamically resize the font today, so please give that a try once it is released and let me know if this helps.
11. srpna 2020 | Verze 2.1.0
thanks for the great datafield. I often turn off the light at daylight with another datafield. Would it be possible, to turn on the light, when a car approaches faster than 50kmh or a self specified speed? And if the car passed, turn off the light again?
11. srpna 2020, MyBikeRadarTraffic
Yes, this should be possible. I will look into adding this feature soon. It won't be activated by default, it will only be something you can enable via settings when you specify a speed at which you want the light to come on.
30. července 2020 | Verze 2.1.0
A must-have add-on for the Varia radar.
21. července 2020 | Verze 2.1.0
Really like the app but have to uninstall after notice varia battery life diminished. Cannot find way to uninstall though. Help please.
11. srpna 2020, MyBikeRadarTraffic
Easiest way to uninstall is through the Connect mobile app or through Garmin Express. Both have the ability to show you what apps you have installed with an uninstall option. Also, note that it should have no impact on the Garmin Varia battery life at all. The only way that you would see a decrease in battery life is if prior to using my app, you used to run the Varia by itself without having it paired to a Garmin display device such as the Edge series or Fenix series of watches. If that is the case, then yes, the process of pairing it and keeping it paired with the Garmin device does decrease battery. I think this would be an unusual situation though as most people like to have it paired with some sort of display device so that they can receive notice of approaching cars. For those people, there should be no decrease in battery life.
13. července 2020 | Verze 2.1.0
I love this! I actually find this very useful. When I ride out in the country it's interesting to see how fast cars and trucks are going when they pass me on those narrow roads. Keep up the great work!
1. července 2020 | Verze 2.1.0
Brilliant addition to the Varia Radar experience. A must-have install for all my Garmin units.
24. června 2020 | Verze 2.1.0
This App just keeps getting better. It is the one app I use all the time as a road/commuter cyclist. Having data now included in Garmin Connect is really useful. However, the Mybiketraffic.com web site gives you even more data to look at.
18. června 2020 | Verze 2.1.0
Great job! Thanks for the Absolute speed!!
16. června 2020 | Verze 2.1.0
So simple, but great for data geeks. Works perfectly. Thanks for all the hard work you have put into this project.
14. června 2020 | Verze 2.0.0
Great job so far. Is it possible to make one datafield of approach speed? Now the numbers are verry small because it’s combined with vehiclecount. It would be so cool if we would have a datafield of the vehiclespeed. It’s just a calculation of riderspeed + approachspeed. Maybe i think to simple -:).
Greeting from the Netherlands
14. června 2020, MyBikeRadarTraffic
This new version allows you to do that, but you have to go into Settings for the IQ app in Garmin Express or Garmin Connect Mobile, and select the Approach Speed as the only field visible. It will still count all the cars and record that information for post ride analysis even if the only item showing is approach speed.
7. června 2020 | Verze 1.5.0
works top !!!
3. června 2020 | Verze 1.5.0
Very cool idea