14. února 2021 | Verze 1.5.2
Not installed on Garmin Marq Capitan.
14. února 2021, macherel
I'm really sorry you're having this problem. Thank you for making contact by email before but I am however disappointed to see this review while I am trying to find a solution to your problem by email. As we have seen together, the error does not seem to come from the application but from a memory issue on your watch.
10. ledna 2021 | Verze 1.5.2
I have load some card codes to test it with "demo" token and widget seems to work properly. Some days after this codes were disappear before I reach testing shop ¯\_(ツ)_/¯.
Now I can confirm that random time codes deleting is working.
10. ledna 2021, macherel
Thank you for your feedback. Some users told me that settings are removed after charging the watch. It must be a Garmin IQ issue but I never be able to reproduce. Have you tried the "Barcode Wallet (1D/2D)" app ? is there the same issue ? Please contact me using the "contact developper" link and check that your email is correctly filled so that I can answer you.
17. prosince 2020 | Verze 1.5.2
It wasn’t displayed anything I set
19. prosince 2020, macherel
You must have made a mistake in settings. Please use the "contact developer" link and let your email address so that I can help you
24. listopadu 2020 | Verze 1.5.2
Very useful widget, but It seems that currently it can display only qrcodes, not linear barcodes, currently when I try to set the code type to, for example, "ean13", accessing my code on the watch I get "Error: 0 Please contact"
25. listopadu 2020, macherel
To contact developer, it is better to use the "contact developer" link and put your email so that I can respond. Regarding your error, ean13 code works only with the first code without a token. You will need a token to use more than one code.
15. listopadu 2020 | Verze 1.5.2
After updating the watch firmware, the saved QR code is lost.
Firmware 5.00 - No qr code
Wrote the code again
Firmware 5.20 - No qr code
Wrote the code again
Firmware 5.30 - No qr code
Wrote the code again
Firmware 5.50 - No qr code
Wrote the code again
16. listopadu 2020, macherel
I'm very sorry to learn that it fails after firmware update. Please prefer using "contact developer" link with your email to find a solution together.
3. listopadu 2020 | Verze 1.4.1
Great widget, thank you very much, I plan on using it for Covid-19 lock down derogations. One remark though, on my Vivoactive 4 the qrcode is too small and I can only make it smaller with the settings, not bigger. It would be great to be able to increase size so that the entire screen is used and the qrcode is more easily readable.
3. listopadu 2020, macherel
First of all, I would like to warn you that the widget does not replace the Covid-19 lock down derogation. I will advise you to always have the digital version of the certificate nearby to present it to the police if they ask you. Regarding the QR code size, I'm aware of this problem but it's difficult to solve it. By default widget try to best fit the screen size. If each square is one pixel larger, the resulting image may be too large. Please use the "contact developer" link with your email so that we can try some tricks
Mehmet Öztürk 🇹🇷 🇩🇪
17. října 2020 | Verze 1.4.1
It took many trials enable external da, disable, disable offline mode enable... to get it run. Now it runs good with my 3 QR-Codes and 5 EAN-13 barcodes.
17. října 2020, macherel
Thank you for your feedback. I know there's too many settings. By default, you should not change anything (except adding your codes and types). I take this opportunity to inform that, for those who have a token, I write a new app name "Barcode Wallet (1D/2D)" that is more simple, more robust and that is not limited to 8 codes.
12. září 2020 | Verze 1.4.0
The only widget you need for display QR codes on your Garmin gear. Very convenient and manageable. The developer is very active and helpful.
12. září 2020, macherel
Thank you very much for your feedback and support. I'm glad this widget can be helpful to other people
13. srpna 2020 | Verze 1.4.0
War wie gerufen für Visit42.eu
Leider war qr Code nur zwei Tage abrufbar.
Nun habe ich ihn mehrmals neu eingegeben und er verschwindet nach kurzer Zeit wieder. Das macht keinen Sinn. Widget Simi sinnlos
13. srpna 2020, macherel
I'm very sorry that you have some trouble with your QR code. The best you can do to resolve your problems is to contact me using the "contact developer" link on the homepage of the widget. Please let your mail so that we can exchange more precisely to solve your problem.
17. května 2020 | Verze 1.3.3
Works perfectly now on Venu too, after firmware update to 4.50.
Very responsive developer.
18. května 2020, macherel
Thank you very much for your review and feedbacks ! :)
12. května 2020 | Verze 1.3.3
This widget with the several available configuration options is doing his job very good. And at least even important the support in case of questions and/or improvementrequests is also very well and with quick response.
12. května 2020, macherel
Thank you for the review! I'm very pleased that the widget fits your needs. :)
26. února 2020 | Verze 1.2.0
Excellent widget. Handle both Aztec and QR codes even without phone nearby.
27. února 2020, macherel
Thank you for your feedback and review :)
23. ledna 2020 | Verze 1.1.5
Best option available for QR Codes on Garmin. Works with special characters (å, ä, ö). With a small donation you get access to the web interface to set up text with row breaks (e.g. vCards).
23. ledna 2020, macherel
Thanks for your support and your feedback :)
6. prosince 2019 | Verze 1.1.5
It's not completely convenient to set it up, but it's a good idea and it does the job
6. prosince 2019, macherel
Thank you for your feedback.
If you have any idea to improve settings, don't hesitate to "contact developper" and send me your suggestion.
Please note, that a web interface exists to change QR codes for those who have full featured widget (using a valid token)
14. září 2019 | Verze 1.1.3
I'd love to have it offline, but thank you, it's a great widgit for my new watch, I'm flashing my QR codes all over the place!
15. září 2019, macherel
Thank you very much for your support.
I just send you a token to fully use offline mode.
1. června 2019 | Verze 0.1.0-1
Have to turn on Garmin connect each time you want to use this, and connect watch to the phone, not so convenience as well. An offline version will be better.
1. června 2019, macherel
Thank you for this feedback. The connection to the phone is still essential for older watches (like the Forerunner® 235 I own). Solutions exist for newer watches but I have not found how to do offline version for all watches yet. However, if the connection to the phone is active and the phone has data access, QR codes can be easily displayed on the watch (nothing special to do with garmin connect)
3. dubna 2019 | Verze 0.1.0-1
Awesome app, would love to be able to use it offline!
12. dubna 2019, macherel
Thank you for your feedback! I did not give up the idea of developing an offline version, but unfortunately I'm having trouble developing such feature :(
17. února 2019 | Verze 0.1.0-1
17. února 2019, macherel
To configure the widget, please use the smartphone app "Garmin Connect". Please follow detailed instruction here : https://github.com/macherel/Connect-IQ-QR-Code-Viewer/wiki
You can also use "Contact Developer" link to send me a mail and have a more precise answer
30. listopadu 2018 | Verze 0.1.0-1
Does not work without bluetooth connected, shows only -104 and if connected it take really long to show the code.
1. prosince 2018, macherel
As I have mentioned in the description, "To generate QR code on your watch, it must be connected to your phone with an available data connexion".
I want to make an "offline" version to resolve this problem but I don't know how to do this.
It's an opensource widget, so if anyone have any idea, he can participate and propose a patch.
I noticed that you will like this feature and I appreciate your objective opinion.
29. listopadu 2018 | Verze 0.1.0-1
Super fast response from developer for the VA3M update! Works great.
For those who need help:
Install the WIDGET. Then in the GARMIN CONNECT MOBILE APP go to [APPEARANCE] then [WIDGETS] click [QR CODE VIEWER], then [SETTINGS]
When here you can add the name of your QR Code to the [LABEL], and then the link or whatever information to the [VALUE].
I linked it to Venmo, you have to use another app to read what the Venmo QR code turns into, then copy and paste that link into the [VALUE] box.
30. listopadu 2018, macherel
20. července 2018 | Verze 0.0.9-1-upd3
Doesn’t work for Delta QR codes for boarding passes
20. července 2018, macherel
I'm sorry to hear that it did not work for you.
Is it possible to send me a private message, using "Contact Developer" link to give me more information about the error?
5. července 2018 | Verze 0.0.9-1-upd3
does not work. no select button. bullsh*t
6. července 2018, macherel
Sorry that it does not work for you.
You should rather use the link "Contact Developer" to send me a message and exchange by email to find a solution to your problem.
7. dubna 2018 | Verze 0.0.9-1
I have seen the same question several times: how to add a qr code and how to get the value. Why not just make it part of the instructions?
8. dubna 2018, macherel
You're right ! Thank you for your advice.
Added to the description.
9. února 2018 | Verze 0.0.8-upd
Make it offline please.
15. února 2018, macherel
Thank you for using the widget.
I agree, that's why I'm already working on an "offline" version but I have problems to make it work properly. Moreover, if someone has ideas, help would be welcome.
23. ledna 2018 | Verze 0.0.8
Hi, how do i input my line or wechat ID thank you
24. ledna 2018, macherel
You may input values in the widget settings (in garmin connect app on your phone)
Please send me a private message for more detail.