11. února 2021 | Verze V1.5
Hi. Can’t sync my stryd power zones with my Garmin tactic solar. Help
31. prosince 2020 | Verze V1.5
Works until it doesn't. Repeatedly crashes my garmin 935 randomly, requiring a hard reset.
4. ledna 2021, StrydTeam
Please contact me directly at [email protected] so that we can work on resolving this issue as quickly as possible. I apologize for this inconvenience.
14. prosince 2020 | Verze V1.5
why not put an alarm for the power zones, we have to look at the watch every time.
thank you for your application
4. listopadu 2020 | Verze V1.5
As a basic datafield, it is OK, therefore 3 stars without any doubt.
At the same time Stryd as an excellent hardware would deserve more advanced datafield.
Although some people must be happy with the “visual zone bar” as an advanced feature, I feel a real pain in my back :-) that Stryd Zones cannot offer any other optional layout.
I mean there are multi-data datafields similar to Stryd Zones which offfer solutions to use them eg. as a half (upper or bottom) datafield of a “2 fields” layout of Garmin watches, but at the same time not one, but 2 or more data of the multi-data datafield are visible.
So imagine I would like to see eg. current power, avg power, HR and avg HR on the same screen. Stryd Zones should be able to show current power and avg power next to each other as a half screen datafield in the upper half of my watch, so in the bottom half I can use HR and avg HR in a “3 fields” layout.
I know there is Stryd Workout app, but it does not allow me
a) to choose avg HR or other precious Garmin datafield like aerobic training effect
b) to have more than 2 screens,
c) or to use any CIQ datafield like 80/20 Run Zones.
Thanks for listening to the users’ voice.
27. října 2020 | Verze V1.5
It really works.
20. října 2020 | Verze V1.5
Works really fine
15. října 2020 | Verze V1.5
Would be profoundly useful to add power zone alerts (which is crude but works) the same way the 80/20 datafield does for pace/HR. A vibration every time a transition between zones occurs, how hard can it be? It’s frustrating enough to keep looking at your watch during the entire course of the run, which also takes away the joy/focus.
Run Power can do it, why can’t Stryd? Thanks.
12. října 2020 | Verze V1.5
Can you please add a setting to disable vibration alert when stryd disconnects? Thanks.
14. září 2020 | Verze v1.4
Stryd is great and this datafield has always worked reliably for me (Fenix 3 and now Fenix 6X). However, I don't look at it at all - I only use it to write Stryd metrics to the FIT file. I use a different datafield to display power.
In fullscreen mode, I would like this DF to display at least 3 metrics - instant power, lap power and lap time or distance. There's plenty of real estate on my Fenix display for that but this DF only shows 2 metrics.
4. září 2020 | Verze v1.4
Lap power it's the same as the overall power. The connection between styrd and the watch sometimes transmit erroneous data.
5. září 2020, StrydTeam
Lap power will reset when the lap button is manually pressed or auto lap has been triggered. If you are executing a structured workout with a watch pre CIQ 3.0 you will have to manually press the lap button to get lap power to reset. This is due to garmin limitations. As for the erroneous data, please send a fit file, or the date of the run to me at [email protected] so I can investigate. I always urge people to do that first so we can figure out these types of issues. Thanks
4. září 2020 | Verze v1.4
Over the last couple of months the connection between my Fenix 5 and Stryd has just randomly failed. Used to be a perfect connection but not any longer. Using by and any connection options (non wind stryd)
5. září 2020, StrydTeam
Can you please send a fit file of where you experienced these issuees to [email protected] , I always urge stryders to contact me directly first, as I cannot properly debug over this medium.
3. září 2020 | Verze v1.4
I am prompted to install it again and again each time I try to access the data fields from Garmin Connect. I have set it up as instructed for Fenix 6 Pro.
4. září 2020, StrydTeam
"I am prompted to install it again and again each time" This is not something that we are in control of, this would be a Garmin issue. I urge all users who are experiencing issues to please reach out to me directly using the email in the `App Info` Description ([email protected]) before leaving a bad review. That way we can work together and find the issue, and in this case I could formulate a case and send it to Garmin. Please email me with pictures/ screenshots of the issue so we can get the ball rolling on solving this.
29. srpna 2020 | Verze v1.4
Unreliable contrary to previous stryd power. Quite frustrating as the errors thst happen after a few seconds/minutes into the run render the whole activity data unusable by other systems.like trainingpeeaks that consider you did not move after the stryd error pops up (it bases stress score of activity on power data as such were given for few seconds and then no data means 0 power)
29. srpna 2020, StrydTeam
Seb I would you please contact me at [email protected] so we can figure out what is causing this error for you. I need to know your stryd username and what watch you are using. I have had not any other reports of this issue for this version, so I would like to find the bug you are experiencing! Looking forward to your email, we take these kinds of issues very seriously. Thanks for reporting it.
27. srpna 2020 | Verze v1.4
Does what it needs to do. Would be nice if zone in a small field was like garmins HR gauge.
26. srpna 2020 | Verze v1.4
The field works well and is reliable. The tiny zone number is not very readable in a field. Could you please add a linear or radial analog gauge? Like f6 radial HR gauge or HR Zones Chart CIQ field.
18. srpna 2020 | Verze V1.3_
Ma fenix 6 pro n’affiche pas la Power zone, mais seulement la puissance ,
6. srpna 2020 | Verze V1.3_
NO Zones on Fenix 6 Pro Solar
26. července 2020 | Verze V1.2_
Good app but Can’t get the different colour zones to appear ?
10. července 2020 | Verze V1.2_
Cannot get the data field onto my Garmin 6s
10. července 2020, StrydTeam
Deb I have my email above in the 'App Info' section for these support type issues. [email protected] , I can help walk you through installing the app.
Jose A. García Jiménez
8. července 2020 | Verze V1.2_
El Stryd no para de desconectarse todo el tiempo.
8. července 2020, StrydTeam
Actualice a la última versión de este campo de datos para resolver este problema.
8. července 2020 | Verze V1.3
Stryd have mostly done an admiral job at a job that they should not have to do at this point (running power is natively supported in every other major running watch brand at this point). It is stable and does what it says it will.
That said, the format of the field really leaves something to be desired. The "zones slider" on the left hand side just doesn't work as well as the standard zone gauge used by every other zones based field (Garmin native or CIQ). The graph/slider is difficult to see, which is presumably why they also used part of the field to print the zone number (you don't need to do that with the normal zone gauge). The other problem is that the zone slider only shows up if the Stryd Zones field is the only field shown on the watch. I have a heart rate zone field that shows me both my heart rate and the zone and it shares the screen with 5 other data fields...and it's actually easier to see at a glance.
If the zones were easier to see they could also replace the zone number on the full screen field with % of Critical Power, which is how most of the Stryd power based training plans indicate training intensity.
So, the general summary is that this data field does what it needs to well from a functional standpoint, but could really use a better display setup.
5. srpna 2020, StrydTeam
Jonathan, can you send me photos of the other zone data field you are referring to that has a visual indicator on smaller screens. I would love to investigate this potential feature improvement.
23. června 2020 | Verze V1.2
The Stryd zones data field is great for always running with your auto cp zones. The ability to have a primary and secondary power metric is sweet!
19. června 2020 | Verze Feb 19, 2020 - 2
For short runs it’s great and the graphs are very informative. However earlier this year I ran an Ultramarathon, and despite switching bluetooth off and removing the sensor from my Fenix 5, the watch still tried searching for the power meter and it drained the battery within 3/4 of the race.
11. června 2020 | Verze Feb 19, 2020 - 2
Good, but would be great if you could include other fields (heart rate, distance, time etc) so that the zones graph at the left side could still be viewed on the same screen as power & distance (or other standard field). The other option is to use multiple fields on the watch itself, but the power zone graph on the left hand side only appears to be there when one a single field (i.e. the Stryd field) is used
16. května 2020 | Verze Feb 19, 2020 - 2
Other than numerical zone switch not working on a small version of the power field (zone number still stays on the top, it's a shame, if you can't disable it at least move it to the side and make power numer bigger, it's hard to read on the run) and it having wrong description (select to display your real time zone?!) everything works as it should.
I'll give it a solid 5 and hope above-mentioned will get swiftly fixed ;)