App Icon

Temps

Popis

A simple widget to display the newest reading from the internal temperature sensor (not available on all devices!), as well as connecting to a Tempe sensor and display it's reading at the same time!</p><p>C or F is based on the "Temperature Units" set on your watch under Settings-System-Units.</p><p>A Tempe Sensor is needed to see the Tempe data</p><p>If you like the app, and want to buy me a cold drink, you can do so by way of https://www.paypal.me/jimm58</p>

Novinky

0.21.2 - added glance support for fenix 6 devices</p><p>0.18 - added support for Oregon, Rino, and GPSMAP 66

Další informace

Oprávnění

Tato aplikace vyžaduje přístup k:

  • datům ze snímače (např. ANT+, srdeční tep, kompas)
  • Historie srdečního tepu, barometru, teploty a nadmořské výšky
  • Approach® S60 Approach® S60
  • Approach® S62 Approach® S62
  • Captain Marvel Captain Marvel
  • D2™ Air D2™ Air
  • D2™ Bravo D2™ Bravo
  • D2™ Bravo Titanium D2™ Bravo Titanium
  • D2™ Charlie D2™ Charlie
  • D2™ Delta D2™ Delta
  • D2™ Delta PX D2™ Delta PX
  • D2™ Delta S D2™ Delta S
  • Darth Vader™ Darth Vader™
  • Descent™ Mk1 Descent™ Mk1
  • Descent™ MK2 Descent™ MK2, Descent™MK2i
  • Descent™ Mk2S Descent™ Mk2S
  • Enduro™ Enduro™
  • First Avenger First Avenger
  • ForeAthlete® 230J ForeAthlete® 230J
  • ForeAthlete® 235J ForeAthlete® 235J
  • ForeAthlete® 630J ForeAthlete® 630J
  • ForeAthlete® 735XTJ ForeAthlete® 735XTJ
  • Forerunner® 230 Forerunner® 230
  • Forerunner® 235 Forerunner® 235
  • Forerunner® 245 Forerunner® 245
  • Forerunner® 245 Music Forerunner® 245 Music
  • Forerunner® 630 Forerunner® 630
  • Forerunner® 645 Forerunner® 645
  • Forerunner® 645 Music Forerunner® 645 Music
  • Forerunner® 735XT Forerunner® 735XT
  • Forerunner® 745 Forerunner® 745
  • Forerunner® 935 Forerunner® 935
  • Forerunner® 945 Forerunner® 945
  • Forerunner® 945 LTE Forerunner® 945 LTE
  • fēnix® 3 fēnix® 3, quatix® 3, tactix® Bravo
  • fēnix® 3 HR fēnix® 3 HR
  • fēnix® 5 fēnix® 5, quatix® 5
  • fēnix® 5 Plus fēnix® 5 Plus
  • fēnix® 5S fēnix® 5S
  • fēnix® 5S Plus fēnix® 5S Plus
  • fēnix® 5X fēnix® 5X, tactix® Charlie
  • fēnix® 5X Plus fēnix® 5X Plus
  • fēnix® 6 fēnix® 6
  • fēnix® 6 Dual Power fēnix® 6 Dual Power
  • fēnix® 6 Pro fēnix® 6 Pro, fēnix® 6 Sapphire
  • fēnix® 6 Pro Dual Power fēnix® 6 Pro Dual Power
  • fēnix® 6 Pro Solar fēnix® 6 Pro Solar
  • fēnix® 6 Solar fēnix® 6 Solar
  • fēnix® 6S fēnix® 6S
  • fēnix® 6S Dual Power fēnix® 6S Dual Power
  • fēnix® 6S Pro fēnix® 6S Pro, fēnix® 6S Sapphire
  • fēnix® 6S Pro Dual Power fēnix® 6S Pro Dual Power
  • fēnix® 6S Pro Solar fēnix® 6S Pro Solar
  • fēnix® 6S Solar fēnix® 6S Solar
  • fēnix® 6X Pro fēnix® 6X Pro, fēnix® 6X Sapphire, fēnix® 6X Pro Solar, tactix® Delta Sapphire, quatix® 6X Solar, tactix® Delta Solar, tactix® Delta Solar Ballisitcs
  • fēnix® Chronos fēnix® Chronos
  • GPSMAP® 66i GPSMAP® 66i
  • GPSMAP® 66s / 66st GPSMAP® 66s / 66st
  • GPSMAP® 66sr GPSMAP® 66sr
  • MARQ™ Adventurer MARQ™ Adventurer
  • MARQ™ Athlete MARQ™ Athlete
  • MARQ™ Aviator MARQ™ Aviator
  • MARQ™ Captain MARQ™ Captain, MARQ™ Captain: American Magic Edition
  • MARQ™ Commander MARQ™ Commander
  • MARQ™ Driver MARQ™ Driver
  • MARQ™ Expedition MARQ™ Expedition
  • MARQ™ Golfer MARQ™ Golfer
  • Mercedes-Benz Venu® Mercedes-Benz Venu®
  • Oregon® 7 Series Oregon® 7 Series
  • quatix® 6 quatix® 6
  • quatix® 6X quatix® 6X, quatix® 6X Solar, quatix® 6X Dual Power
  • Rey™ Rey™
  • Rino® 7 Series Rino® 7 Series
  • Venu® Venu®
  • Venu® 2 Venu® 2
  • Venu® 2S Venu® 2S
  • Venu® Sq. Venu® Sq.
  • Venu® Sq. Music Venu® Sq. Music
  • vívoactive® 3 vívoactive® 3
  • vívoactive® 3 Mercedes-Benz® Collection vívoactive® 3 Mercedes-Benz® Collection
  • vívoactive® 3 Music vívoactive® 3 Music
  • vívoactive® 4 vívoactive® 4, GarminActive
  • vívoactive® 4S vívoactive® 4S, GarminActive S
  • vívoactive® HR vívoactive® HR
Průměrné hodnocení: (70 hodnocení)

Ardi
5. června 2021 | Verze 0.24.3

No funciona la temperatura exterior en el Garmin 6 Pro Sapphire, la temperatura interior funciona perfectamente, la parte inferior de la pantalla reloj pone conectango ¿hay Solucion?

Odpověď vývojáře
6. června 2021, jim_m_58

To see the ambient temperature, you need to have a Garmin Tempe and have it paired with your watch.

Bjørn Fischer Malskær
5. června 2021 | Verze 0.24.3

Works flawless on Forerunner 235. Simple and to the point.

Dušan Jurkovič
25. dubna 2021 | Verze 0.24.3

Perfektní widget. Nešlo by taktéž udělat i datové pole ( data fields ) pro edge 530?

Min
22. března 2021 | Verze 0.24.1

Does not work with Venu Sq Music.

Odpověď vývojáře
23. března 2021, jim_m_58

The venu sq doesn't have an internal temperature sensor so for anything to display you need an external Tempe sensor.

Paco Vigil
16. března 2021 | Verze 0.24.1

Dont work !!

Odpověď vývojáře
17. března 2021, jim_m_58

This doesn't help anyone. Use contact developer and tell me what watch, if you have a tempe connected, etc..

Adam
11. března 2021 | Verze 0.24.1

Works as expected, much better than the built-in Temp app.

PJJim
9. března 2021 | Verze 0.24.1

Never gets past connecting on my S62. Useless. Will Uninstaller now.

Odpověď vývojáře
10. března 2021, jim_m_58

With a tempe sensor it can take up to a minute to connect, and on some devices the widget can time out before that happens. Press the upper right button every 20 seconds to restart the time out. You do have a tempe paired to the watch, correct?

Steffen Benter
10. února 2021 | Verze 0.24.1

Works fine on my Fenix 6x pro Sapphire. Is there a way to change the graphics display from internal to Tempe?

Odpověď vývojáře
11. února 2021, jim_m_58

No. That would require an on-going connection to the tempe, and that would cause some issues like battery drain.

Grrremlyn
22. ledna 2021 | Verze 0.24.1

I agree with the other review for the Venu SQ, that the app downloads very quickly, but all it says is "connecting". I checked to see if the Tempe was paired and connected, and it was.

Odpověď vývojáře
23. ledna 2021, jim_m_58

One thing about the tempe is is can take up to a minutes to connect, and on a venu sq, widgets time out in less than a minute, So you may have to do something like tap the screen every 20 seconds to keep the widget from timing out.

Carajean Murphy
1. ledna 2021 | Verze 0.24.1

Doesn’t seem to be working in venu sq, downloaded pretty quick which is good, but all it seems to say is connecting.

Odpověď vývojáře
2. ledna 2021, jim_m_58

The Venu Sq doesn't have an internal temperature sensor (it's related to not having a baro altimeter) so all it can show is a tempe if you have one paired and connected.

danilo mariani
9. prosince 2020 | Verze 0.24.1

Non funziona

Odpověď vývojáře
9. prosince 2020, jim_m_58

Please use "contact Developer" to let me know what's not working, as leaving a 1 star review with no words is useless to both me and other users.

Stefan 2506
3. září 2020 | Verze 0.23

This should be a standard feature, the fact that the internal sensor was just gone once connected a Tempe really bugged me! Great work! I am just not sure how this will effect battery life but will see...

Odpověď vývojáře
3. září 2020, jim_m_58

No impact on the battery life, as it's a widget and only runs for a short time. I in fact wrote it when native temperature widget started not showing the internal temperature if a tempe was paired.

Oswaldo Chaves Hoyos
17. srpna 2020 | Verze 0.23

Buena tarde, tengo un Fenix 6x Pro y me sale Tempe None Paired. No veo cómo pueda configurar esto y saber mi temperatura corporal. Tampoco cómo escoger Fahrenheit o Centígrados, gracias y estaré pendiente.

Odpověď vývojáře
18. srpna 2020, jim_m_58

The Tempe is an external sensor, and if you don't have one or it's not paired, this is what you'll see. The internal temperature is the temperature sensor inside the watch. It's internal to the watch, and not body temperature as it's impacted by the ambient air. On the watch, to to settings-system-units and set temperature units to either C or F

john_tseng_garmin
7. července 2020 | Verze 0.23

Approach S62 shows "None Paired" ? S62 is on the support list.

Odpověď vývojáře
8. července 2020, jim_m_58

Pairing refers to a paired Tempe Sensor. Do you have one? The internal temperature is not available on the s62, so a tempe is the only option.

Regin Swenning
24. června 2020 | Verze 0.23

fenix3 HR - I only get temperature from the Tempe-sensor, no Internal reading showing on the screen. (Temps v. 0.23)

Odpověď vývojáře
26. června 2020, jim_m_58

The f3 doesn't support CIQ reading the internal temperature. Internal temp is only available on newer devices.

Michael Irmer
11. června 2020 | Verze 0.22

Internal temperature is not available on Forerunner 245. Can you implement an option to disable the internal temperature? Tempe works fine.

Odpověď vývojáře
11. června 2020, jim_m_58

I'll add it to my list of things to look into

Richard Vowles
27. května 2020 | Verze 0.22

I have a Tactix Delta and it works fine apart from the fact it won’t vibrate when receiving the Tempe reading as it did on the tactix Charlie.

Odpověď vývojáře
27. května 2020, jim_m_58

You must be thinking of a different widget as this one never vibrates. Could it be the FW is doing a vibrate when it connects to the tempe?

Sam
20. května 2020 | Verze 0.22

Ok, very very Ok.

Giantmtbiker01
15. května 2020 | Verze 0.22

Great app showing the info needed. Given experience with similar temperature widgets and in particular connectivity, this one is perfect. Excellent work thank you.

Geneviève
11. května 2020 | Verze 0.22

I have a question: is the temperature reading for my skin, or for the ambient air (or water, when I'm swimming)? I have a Forerunner 735XT. Thank you.

Odpověď vývojáře
12. května 2020, jim_m_58

It's not really your skin or ambient. It's the temperature inside the watch that can be impacted by both body temp as well as ambient. The Tempe will be ambient if you keep it shaded and out of direct sunlight.

Zaca
2. května 2020 | Verze 0.22

It doesnt work in Forerunner 235, i dont know why, please help me!!

Odpověď vývojáře
3. května 2020, jim_m_58

The 235 doesn't have an internal temperature sensor, so for this to work, you need to have a Tempe sensor.

Jose Manuel
9. dubna 2020 | Verze 0.22

No salecen grados centigrados

Odpověď vývojáře
9. dubna 2020, jim_m_58

C or F is based on a standard setting on your watch. Under Settings/System/Units, set Temperatature Units to C or F.

Andre Robin
31. března 2020 | Verze 0.22

Installed on my Vivoactive HR and doesn't work.

Odpověď vývojáře
31. března 2020, jim_m_58

Please use "contact developer" (on the right) for this, as "it doesn't work" tells me nothing.

Karl Mortar
17. ledna 2020 | Verze 0.21.7

does low and high show data from tempe when it is connected or from internal sensor? native garmin widget can do that.

Odpověď vývojáře
17. ledna 2020, jim_m_58

The 24 low and high from the Tempe is not available in Connect IQ but is available to native widgets.

Miguel
21. prosince 2019 | Verze 0.21.6

This app works as expected and way faster than the original temperature widget. Low-high for tempe is missing, and it would certainly get 5* if a plot could both graphs internal+tempe. Good job!

Odpověď vývojáře
22. prosince 2019, jim_m_58

In CIQ, the 24h high/low for the tempe isn't available, and to do direct ANT to get it, it would conflict with other apps that use it as a native sensor. As far as graphing the tempe, there are a couple issues, in that it would require a background process, which can run at most 30 seconds at a time, where it can take a minute or so for the tempe to connect. Even without that, it would have an impact on the battery - connecting to the sensor on a regular basis.

Je nám líto, ale zatím nejsou k dispozici žádné statistiky.