17. ledna 2020 | Verze 2.72.5
nice app but not easy to figure out without a good MANUAL.
would be nice to have a guide to figure out something like how to upload tracks or maps that can be used for hiking. help?
18. ledna 2020, jim_m_58
You can't upload tracks or maps. It just records the activity. There's really not a lot as you start a recording, pause a recording, save/discard a recording were you can mark waypoints with the back button (same as laps in native apps)
11. ledna 2020 | Verze 2.72.5
Works great! Also developer is fast and responsive to my question.
31. prosince 2019 | Verze 2.72.4
Very Nice app! Is it possible to move and zoom the map some way on my 830? That would be very great. Or is it possible to leave the app, check some info and re enter the app without stopping tracking?
30. listopadu 2019 | Verze 2.72.4
Not starting on vivoactive 3 music.
30. listopadu 2019, jim_m_58
If it's not getting GPS, try starting a native activity like "run" that uses GPS. If it's something else, please use "contact developer" on the right and indicate the firmware you're running and more details about what you are seeing.
26. listopadu 2019 | Verze 2.72.4
Great app. I still carry a big Garmin GPS (almost doubles the weight of my pack) but it is no longer there as a recording device as this app does that! Cheers!
22. listopadu 2019 | Verze 2.72.4
As someone else has said, the app crashed after 3h (FR245). I was on a 7h activity and I lost everything. I contacted support with information about the device to help find the issue.
22. listopadu 2019, jim_m_58
For this kind of thing, you really want to use contact developer at the left vs contacting Garmin. Garmin doesn't have the code and I'm the one that can help.
18. listopadu 2019 | Verze 2.72.4
This app is great for hiking! I really like how well it tracks my elevation and details my route, along with all the other details it gives you.
29. října 2019 | Verze 2.72.4
Some may say I'm being harsh, but an app that crashes mid activity is definitely not worth more than 2 stars. This happened my last 2 activities when I received a notification. This app only.
29. října 2019, jim_m_58
This is a case where "Contact Developer" at the right should be used, as there's no indication of what device you have, the FW you are running, etc. so it can be investigated.
The app itself is being used by others with no problem, but without more info, there's nothing I can do.
29. října 2019 | Verze 2.72.4
Great apps for hiking. All info are recorded accordingly but I found out that VO2 MAX info is blank whenever this app is used. All other built in activities are recorded in VO2 Max. It is great if this can be included?
13. října 2019 | Verze 2.72.3
Kann ich auf der venu nicht beenden. Schade.
13. října 2019, jim_m_58
There's a bug in the FW for both the venu and va4 that impacts this app as well as others. In the mean time, turning the watch off an on when it's stuck gets out of this, and your activity has been saved just fine.
for things like this, please use "contact developer" on the right, as it's really not this app and there's no reason for a bad review. It's the firmware.
9. října 2019 | Verze 2.72.3
Can't exit out of it on Vivoactive 4s. Have to restart watch to exit program. Uninstalled.
9. října 2019, jim_m_58
There seems to be in issue with the current FW on a va4. After you've saved the hike and are stuck, power off the watch. You won't lose anything, but it's a work-around for now.
22. září 2019 | Verze 2.72.2
app stopped running. i reinstalled it few times, but constantly stucks on display showing 'IQ' with yellow exclamation point.
22. září 2019, jim_m_58
Try doing a reboot of the wathc. On some, it's holding the light button for about 20 seconds until the watch turns itself off. On the vahr, you hold the left button the same way.
11. srpna 2019 | Verze 2.71.2
Hike2+ is the ultimate hiking app. I've been using it for quite a while and was never disappointed, or had issues/crashes. It creates activities that sync and work with garmin connect without any issues. Can fully recommend!
30. června 2019 | Verze 2.71.2
Crashes on Fenix 5X after short period of use
30. června 2019, jim_m_58
Please use "Contact Developer and provide some info such as what version of firmware you're running and what you're doing when it crashes.
29. června 2019 | Verze 2.71.2
Worked well for short hikes, but anything over an hour it freezes the watch (Vivoactive 3 Music) and won't save/show the hike. Activity doesn't show up anywhere when I sync to Garmin Connect. Disappointing because I liked it other than this.
29. června 2019, jim_m_58
That sounds like a problem with the firmware on the watch with the freeze and the sync failure. Please use "contact developer" at the right and let me know which firmware you are running,
11. června 2019 | Verze 2.71.2
Love the app. Is there a way to delete saved waypoints tho?
11. června 2019, jim_m_58
When you first start the app, press menu, and one of the options is "Load WPs". If you change that to "no" the waypoints aren't loaded/used.
18. května 2019 | Verze 2.71.2
Just tried it out during hiking and it is the first application that makes my watch to crash after a few pause/resume.
All the information you need is available (and even more), but it could be more concise instead of switching betweens screens.
18. května 2019, jim_m_58
Please use "contact developer" at the right for things like this, and let me know things like which watch and firmware version. As far as the number of screens, that's configurable using Garmin Express or Garmin Connect on your phone.
6. února 2019 | Verze 2.69.2
Is possible to have a metric unit system and Italian language? Thanks
6. února 2019, jim_m_58
Statute or metric as based on the settings on your watch. Under "Settings-System-Units"
This app is only available in English.
13. ledna 2019 | Verze 2.68
Great app, love it!
But can we get an option to turn off elevation alerts? It's not needed for me to have it vibrate every time I climb up or down... I know I'm climbing anyway! :D
13. ledna 2019, jim_m_58
In app settings, turn off the "Dots for Floors On Chart"). The wording changed to
"Floors Alert and Show on chart" in the current version.
So you can already turn it off.
5. ledna 2019 | Verze 2.68
Any plans adding map support on Edge devices?
6. ledna 2019, jim_m_58
Yes, for the edge 1030, but it's taking a bit longer than for the fenix 5x and fenix 5+ devices.
2. ledna 2019 | Verze 2.67
After two days of attempts of registering my track I've uninstalled it and chose another one.
I used it on a Vivoactive 3. It got continuously paused while I was moving (a vibration informed me every time of them). It lost a lot of the gps and altitude data. I'm sorry to give a bad review but my experience with this app has not been so good. There are others that offer more and that I used with no problems
2. ledna 2019, jim_m_58
I'm not sure what you mean by "registering my track". The only way to pause the app is by pressing the button, so it shouldn't happen randomly. Are you sure you are seeing this with Hike2 and not another app? Please use Contact Developer so we can sort this out
iRpz ® otrebor
7. října 2018 | Verze 2.64
Esta aplicación cuenta los pasos?
7. října 2018, jim_m_58
On devices that track steps, it shows steps on the same screen where calories are displayed. Edge devices don't track steps, and on others, Activity tracking must be on.
Change screens with up/down buttons or swipes to see the different screens
2. října 2018 | Verze 2.64
Sorry, the "GPS" option is not displayed in "Settings".
2. října 2018, jim_m_58
That's not available in any CIQ device app. The way it works, is it uses the setting from the last native app you used. It's nothing with Hike2 itself. Please use "contact developer" (on the right) for questions like this instead of leaving reviews.
21. září 2018 | Verze 2.63
Good app as per reviews however not able to locate option to switch on GPS. I have tried means available but not able to do it.
21. září 2018, jim_m_58
Hike2 turns on GPS itself. If you are seeing a delay getting GPS, start something like the native run app, and wait for it to "go green". It shows better progress in getting a fix than is possible in CIQ.
19. září 2018 | Verze 2.63
I've installed app on VA3 and it works perfectly. Big thanks to the developer. It has everything i expected and even more