Jednoduché widgetu zobrazuje atmosférický tlak v mm Hg / milibarech / hPa/ psi / palec Hg (Ambient tlaku, který je přítomen v meteorologických zpráv a předpovědí) a nadmořská výška v metrech / stop (v závislosti na nastavení systému). Gadget, který je standardně dodáván v hodinách od Garminu, zobrazuje barometrický tlak, přivedený na nulovou hladinu moře. Neexistuje žádný způsob, jak rychle zobrazení je „surový“ tlak, ale vytvořit datové pole v některém ze tříd a začít aktivitu, je to dlouhá a nepohodlná. Tento widget je navržen tak, aby vyřešil všechny tyto potíže bez zahájení relace.</p>
1.9.5 - new devices</p><p>1.9.3 - new devices, cosmetic improvements in glances</p><p>1.9.2 - translations fix</p><p>1.9.1 - SDK 3.1.9, glances support added, known issue: translations</p><p>1.6.8 - hPa units added, minor fixes</p><p>1.6.7 - SDK 3.1.7</p><p>1.6.6 - SDK 3.1.6, new devices, exit widget fix</p><p>1.6.2 - SDK 3.1.3 (fix), fenix 6, Gpsmap 86, venu, vivoactive 4/4s</p><p>1.5.2 - SDK 3.0.11, Edge 530/830, Forerunner 945</p>
Tato aplikace vyžaduje přístup k:
ROBERTS
9. ledna 2021 | Verze 1.9.5
Björn Fröderberg
29. prosince 2020 | Verze 1.9.5
Great widget. Works perfect for me and my needs :) Wonder if it would be easy to create a variant as a "Data field" as well?
Deiv
20. prosince 2020 | Verze 1.9.5
Dorin Boca
5. listopadu 2020 | Verze 1.9.5
Can you add a GRAPH? It would be great to track the pressure, not only to see the raw value. Thx!
Andrew
20. října 2020 | Verze 1.9.3
Хороший виджет. А если бы вы еще и с температурой объединили бы, чтобы два слота в часах не занимал, был бы вообще идеальным.)
Bernd Hafen
8. října 2020 | Verze 1.9.3
Das Widget funktioniert sehr gut auf der Venu. Aber wie wird die Höhe kalibriert ? Über GPS ? Und wenn ja, wird die Höhe ständig per GPS aktualisiert ? In welchem Intervall ? Vielen Dank.
Odpověď vývojáře
8. října 2020, Navicom
Altitude calibration on your device can be performed using the manual: https://support.garmin.com/en-ZA/?faq=TBpNa6wJf2AbZK4Jgb99E6 Remember, GPS altitude basement is not so precise as manual enter/DEM (that is not possible on your device, please do not expect all fenix features on it). 3rd party developers have no access to calibration menu so 4 stars are 4 stars only and we cannot help you, sorry again.
David
27. srpna 2020 | Verze 1.9.2
Great app! One question: the watch measures ambient pressure directly and then using altitude determined from GPS signal calculates MSL? I was checking it as a tropical low pressure storm came through and the ambient pressure was dropping (in blue), altitude rising, and MSL (small number at bottom) staying constant. This despite me not going anywhere. Seems like ambient and baro pressures should have been dropping and altitude remained constant. Just trying to understand how this works. Thanks!
Odpověď vývojáře
8. října 2020, Navicom
All values readings come from Garmin SDK. We really do not know how Garmin algorithms work inside and what are the values provided in your particular case. Ask them if you are really interested in. Also there are some settings that can affect the result: like constant altitude, constant pressure, automatic detection. Exception was on fenix 3 family: device SDK can provide only altitude and MSL pressure, no direct reading from pressure sensor available, so we calculated ambient pressure using the formula and the temperature.
Dzidu79
1. července 2020 | Verze 1.9.2
Dzidu79
13. května 2020 | Verze 1.6.8
would it be possible for the pressure value to be visible without entering the widget?
nmozheyko
26. dubna 2020 | Verze 1.6.8
Не показывает данные, только синий прямоугольник на экране и нет передачи данных на циферблат! Часы Vivoactive3
Odpověď vývojáře
28. dubna 2020, Navicom
Воспользуйтесь пожалуйста ссылкой https://apps.garmin.com/en-US/apps/00678298-6672-4228-9c82-c9aa00e43df0/contactdeveloper для обратной связи. Укажите вашу почту, пришлите файл с часов garmindevice.xml. Что-то поменялось у Garmin в прошивках, надо разбираться, раньше всё работало.
Юрий
23. března 2020 | Verze 1.6.8
Стал показывать на 1кПа меньше, чем на самом деле. С несколькими приборами сверял, в т.ч. с повереным.
Ben
21. března 2020 | Verze 1.6.8
Works great with 920XT, but what’s the number underneath the altitude?
GotthamAlphaKwesta
20. března 2020 | Verze 1.6.8
Mohsen
19. března 2020 | Verze 1.6.8
Very nice widget. Please also add the air pressure chart. For example the last few hours
Dzidu79
18. března 2020 | Verze 1.6.8
Dzidu79
18. března 2020 | Verze 1.6.7
Michał
15. března 2020 | Verze 1.6.7
No hPa junit, impossible to set default junit. Works a little slow on AV4.
Angelika
13. března 2020 | Verze 1.6.7
Подскажите, пожалуйста, что означает третья цифра? Первая - атм. давление, вторая - высота над уровнем моря, а третья? Спасибо за виджет!
FC. JAVIER DE LA FUENTE GONZALEZ
6. března 2020 | Verze 1.6.7
Mohsen
3. března 2020 | Verze 1.6.7
Kanchai Yafan
18. února 2020 | Verze 1.6.7
Not work my vivo active3 music not accurate pressure.
Odpověď vývojáře
18. února 2020, Navicom
Sorry about that. Your device is not fenix. Do not expect from it extremely precision. Developers only read from Connect IQ platform the values the device provides. You can try to calibrate altimeter using the manual https://support.garmin.com/en-US/?faq=FmE1UxYdn56rYdmThGbO06
Oleksandr Vorovchenko
26. ledna 2020 | Verze 1.6.6
Doesn't work on my FR945. My watch rebooted after the install. It was shown as installed in GC, but was absent in the watch. I've tried to reinstall it, but with no luck. Update: After an hour or so .
Odpověď vývojáře
26. ledna 2020, Navicom
Please make sure you have updated firmware on your device via Garmin Express. Also sync with Garmin Connect installs. It will appear in widgets carousel. (Press UP/DOWN buttons few times until you find the widget). Write us about your situation: https://apps.garmin.com/en-US/apps/00678298-6672-4228-9c82-c9aa00e43df0/contactdeveloper
Xavier-Alexandre BILLARD
28. prosince 2019 | Verze 1.6.6
HappyUnicorn
20. prosince 2019 | Verze 1.6.6
Je nám líto, ale zatím nejsou k dispozici žádné statistiky.