Name: TubeWitch for Tubolito SYNCD
Rating: 5 (3 reviews)
Author: BB-BB

TubeWitch for Tubolito SYNCD is a FREE Garmin Data Field that brings Tubolito SYNCD Bluetooth tire-pressure data to compatible Garmin Edge devices and watches. It offers extensive customization, flexible display and label options, configurable low/high pressure targets, and audible, pop-up, and vibration pressure alerts designed to prevent nuisance duplicate alarms.

TubeWitch passively receives SYNCD Bluetooth Low Energy broadcasts. No pairing is required.

Troubleshooting: TubeWitch.com/Tubolito

**** ALERT: SAVING SETTINGS WITH THE CONNECT IQ MOBILE APP IS AFFECTED BY A BUG IN THE GARMIN IQ SYSTEM. MAKE SURE THE TUBEWITCH DATA FIELD IS VISIBLE ON YOUR GARMIN DEVICE WHEN CHANGING SETTINGS. IF SETTINGS STILL DO NOT SAVE, TRY USING GARMIN EXPRESS. ****


 
Required: Use the Garmin Connect IQ mobile app or Garmin Express to enter Tubolito SYNCD sensor names and pressure targets in the TubeWitch settings. See screenshots and tips below.


 
Tips:
 ● Install TubeWitch, then reboot your Garmin device and restart the Garmin Connect IQ mobile app.
 ● On your Garmin device, add the TubeWitch Data Field to a data screen and LEAVE IT VISIBLE.
 ● In the Connect IQ mobile app, open TubeWitch settings and enter each complete Tubolito SYNCD sensor name, such as SYNCD-C3D0. Find the sensor name in the Tubolito SYNCD mobile app.
 ● Do not enter the Bluetooth address.
 ● Enter the Low and High pressure target values in your selected pressure unit. ( PSI, kPa, or BAR)
 ● Tubolito SYNCD provides data less frequently than ANT+ sensors, so pressure updates less frequent. Allow several minutes for initial data after setup or after the data field restarts.
 ● Do not pair the Tubolito SYNCD sensor with the Garmin. TubeWitch reads the sensor’s advertised Bluetooth data with no native pairing needed.
 ● **** When changing settings with the Connect IQ app, TubeWitch MUST BE VISIBLE on your Garmin.
 ● **** Try using Garmin Express if the Connect IQ mobile app fails to save settings. ****


 
FAQs:
 ● What Tubolito products are supported? TubeWitch currently supports Tubolito SYNCD & PSENS Bluetooth tire-pressure sensors.
 ● Is it accurate? Yes, TubeWitch displays the same pressure as shown in the Tubolito mobile app.
 ● Why is a “?” shown next to pressure? The displayed reading is retained but stale because TubeWitch has not received a recent sensor broadcast.
 ● Why is an “X” shown next to pressure? During an activity, TubeWitch reached its configured Sensor Timeout and stopped searching for that position to conserve battery. Touch the data field to rescan on supported touch devices.
 ● Will it work with more than two sensors? Yes. Save up to five named bikes or wheel sets. Manually select the active sensor set, choose Auto to scan configured sets, or use Touch to Switch. Only one sensor set is displayed at a time.
 ● Can I mix and match Tubolito SYNCD and TyreWiz sensors.  Yes, but you would need both versions of TubeWitch installed. Each brand of sensor would be contained to their own respective data field.
 ● Will it record tire-pressure data to the Garmin activity? Yes, when enabled in TubeWitch settings.
 ● What does TubeWitch add? Flexible layouts, labels, colors, per-sensor low/high targets, configurable alerts, stale-data indicators, FIT recording, five sensor sets, and more.


 
Search terms: TubeWitch, Tube Witch, Tubolito, Tubolito SYNCD, Tubo-Road SYNCD, SYNCD, PSENS, Bluetooth, Bluetooth LE, BLE, tire pressure, tyre pressure, TPMS, smart tube

TubeWitch is an independent third-party Garmin Connect IQ data field and is not affiliated with, endorsed by, or sponsored by Garmin or Tubolito. All trademarks are the property of their respective owners.